AD45 Underground Articulated Truck

Bore	5.7in
Displacement	1104.53in³
Engine Model	Cat® C18
Engine Power - EU Stage V Engine - ISO 14396:2002	598hp
Engine Power - Tier 3 Engine - ISO 14396:2002	581hp
Engine Power - VR Engine - ISO 14396:2002	581hp
Note (1)	Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Note (2)	All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3)	Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
Note (4)	Optional Ventilation Reduction Package available.
Note (5)	Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Note (6)	Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (7)	*<5 %
Stroke	7.2in

Body Capacities	18.0-25.1 m³ (23.5-32.8 yd³)
Gross Machine Mass	196765lb
Nominal Payload Capacity	99208lb
Shipping Mass (Other Engine Models)	94415lb
Shipping Mass (Stage V Engine Model)	96225lb

Operating Mass	91285lb
Operating Mass + Rated Payload	190495lb
Operating Mass + Rated Payload - Front Axle	89235lb
Operating Mass + Rated Payload - Rear Axle	101260lb
Operating Mass - Front Axle	64565lb
Operating Mass - Rear Axle	26720lb

Operating Mass	88320lb
Operating Mass + Rated Payload	187530lb
Operating Mass + Rated Payload - Front Axle	85355lb
Operating Mass + Rated Payload - Rear Axle	102175lb
Operating Mass - Front Axle	61225lb
Operating Mass - Rear Axle	27095lb

Empty - Front Axle	70.7%
Empty - Rear Axle	29.3%
Loaded - Front Axle	46.8%
Loaded - Rear Axle	53.2%

Empty - Front Axle	69.3%
Empty - Rear Axle	30.7%
Loaded - Front Axle	45.5%
Loaded - Rear Axle	54.5%

Lower	21 Seconds
Raise	15 Seconds
Total Cycle Time	36 Seconds

Lower	21 Seconds
Raise	14 Seconds
Total Cycle Time	35 Seconds

Dump Body - 1	23.6yd³
Dump Body - 2 - Standard	27.9yd³
Dump Body - 3	32.8yd³
Ejector Body	29.9yd³
Note	Heaped SAE 2:1.

Articulation Angle	42.5°
Frame Oscillation	10°
Inside Clearance Radius*	209in
Note	*Clearance dimensions are for reference only.
Outside Clearance Radius*	371in

Forward - 1	4.4mile/h
Forward - 2	5.9mile/h
Forward - 3	8mile/h
Forward - 4	10.8mile/h
Forward - 5	14.6mile/h
Forward - 6	19.7mile/h
Forward - 7	26.4mile/h
Note	Maximum travel speeds with standard 29.5 × R29 tires.
Reverse - 1	4.2mile/h
Reverse - 2	5.6mile/h

Cooling System	22.5gal (US)
Engine Crankcase - With Filter	16.9gal (US)
Front Differential and Final Drives	20.3gal (US)
Fuel Tank	201.8gal (US)
Hydraulic Tank	70.3gal (US)
Rear Differential and Final Drives	21.9gal (US)
Transmission	15.9gal (US)

Tire Size	29.5 × R29

Standards	ROPS/FOPS Certified Cab

Differential Ratio	3.46:1
Final Drive Ratio	5.65:1
Total Reduction Ratio	19.55:1

Standard Equipment:

12V power supply in cab
Alternator, 95-amp
Auxiliary start receptacle
Battery disconnect switch, ground level
Circuit breaker, 80-amp
Corrosive protection spray
Diagnostic connector
Electric starting, 24V
Engine shutdown switch, ground level
– Front left hand side
Lighting
– Headlights with dimmer switch, LED
– Brake and tail lights
– Rear work light (cab mounted), LED
– Reversing lights, LED
Low maintenance batteries
Reversing alarm
Starting and charging system

Cat Electronic Monitoring System (Cat EMS)
Electric horns
Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer
Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal
Low hydraulic level warning
Open operator station ROPS/FOPS structure
Operator presence system (auto park brake)
Rearview mirrors
Suspension seat Cat Comfort TLV2 with retractable seat belt
Trainer/passenger seat and seat belt
Tilt/telescopic steering wheel
Turn signal indicators

Cat C18 ATAAC diesel engine, 6-cylinder
Automatic brake retarder control
Auto shift transmission 7 speed forward/2 speed reverse
Control throttle shifting
Engine air intake precleaner
Electric fuel priming pump
Exhaust, turbo compartment shielding
Four wheel drive
Long life coolant
Programmable ground speed limiting
Programmable gear block out with tray up
Radiator, cross flow; Radiator cap manual release
Secondary steering system
SAFR^™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled
Torque converter, standard with automatic lockup

Body, dump, (21.3 m³, 27.9 yd³)
Catalytic exhaust purifier/muffler group
Centralized lubrication points
Decals, international picto graphics
Dual fuel tanks
Engine and transmission belly guards
Fenders, front, rear flaps
Fire wall
Fuel system manual shut off tap
Front axle suspension
Frame lifting lugs
Front and rear tow pin
Front rubber bumpers
Gauges, brake pressure
Hand hold (access on/off top deck)
Hitch, articulated and oscillated
Operation and Maintenance Manual – English and other applicable local languages to select
S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil
Swing out radiator grill
Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

Optional Equipment:

Battery shutdown
– Ground level isolation, in cab isolation switch
– Ground level isolation, engine shutdown switch
– Ground level isolation, in cab isolation, engine shutdown switch
Body dump
– Body (18.0 m³, 23.5 yd³)
– Body (25.1 m³, 32.8 yd³)
Body ejector
– Ejector (22.9 m³, 30.0 yd³)
Body liners, impact and/or wear
– 10 mm (0.4"), body, dump (18.0 m³, 23.5 yd³)
– 10 mm (0.4"), body, dump (21.3 m³, 27.9 yd³)
– 10 mm (0.4"), body, dump (25.1 m³, 32.8 yd³)
– 10 mm (0.4"), body, ejector (22.9 m³, 30.0 yd³)
Body wear plate, external
– 16 mm (0.62"), body, dump (18.0 m³, 23.5 yd³)
– 16 mm (0.62"), body, dump (21.3 m³, 27.9 yd³)
– 16 mm (0.62"), body, dump (25.1 m³, 32.8 yd³)
Camera
– Color rear facing
– Color loading
Cover, anti vandalism for shipping
Engine options
– Engine, Stage V
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)
DPF (Flow Through) Filter
Fast fill system
– Coolant
– Engine oil
– Fuel (dual tanks)
– Hydraulic oil
– Transmission oil
Fire suppression system
– Ansul, wet
Fluids
– Arctic fuel
– Arctic coolant
Handrail Extension
Lubrication system
– Automatic, dump or ejector body
– Centralized, ejector body
Mine transfer
– Mine transfer ready front frame (tack welded)
– Mine transfer ready dump body (tack welded)
– Mine transfer ready ejector body (tack welded)
Operators station ROPS/FOPS enclosed
– Air conditioning
– Cab pressurizer and filter
– Dome light
– Heater
– Radio ready compartment for radio and speakers
– Sun visor
– Window, sliding cab door
Park brake switch engagement
– Push to apply
– Pull to apply
Payload
– Truck Payload Measurement System (TPMS)
Reflective tape
Rims
– Rim identification numbering
– Spare, tubeless
Seat
– Suspension seat Cat Comfort TLV2, vinyl
– Suspension seat tee, mechanical
Seat cover
– Tee and Cat Comfort TLV2
– Seat cover, companion
Service tools
– Collet jacking bolts, dump or ejector
– Diagnostics box
– Hoist cylinder supports (for body removal)
– Brake wear gauge
– Reference parts manual for additional tooling available
Switches
– Engine shutdown, fire suppression activation
– Idle timer
– Engine shutdown, fire suppression activation/idle timer
Technology
– Product Link Elite (PLE) system
Tire arrangements
– Tire, 29.5 × R29 VSNT Bridgestone
– Tire, 29.5 × R29 VSDL Bridgestone
Torque converter, high altitude, 3000 m (9,842 ft) and up
NOTE: Not all features are available in all regions. See your Cat dealer for more information.