| Bore | 5.1in |
|---|---|
| Displacement | 680.4in³ |
| Engine Model | Cat® C11 |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 271hp |
| Engine Power - VR Engine - ISO 14396:2002 | 271hp |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) | No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. |
| Note (4) | Optional Ventilation Reduction package available. |
| Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. |
| Stroke | 5.5in |
| Breakout Force - Lift (ISO) | 42333lb |
|---|---|
| Breakout Force - Tilt (ISO) | 39524lb |
| Gross Machine Mass | 97453lb |
| Nominal Payload Capacity | 22487lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | 46067lb |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | 57110lb |
| Note | *Calculated weights. |
|---|---|
| Operating Mass + Rated Payload* | 88956lb |
| Operating Mass + Rated Payload* - Front Axle | 62011lb |
| Operating Mass + Rated Payload* - Rear Axle | 26944lb |
| Operating Mass* | 66469lb |
| Operating Mass* - Front Axle | 28404lb |
| Operating Mass* - Rear Axle | 38065lb |
| Forward - 1 | 2.8mile/h |
|---|---|
| Forward - 2 | 5.6mile/h |
| Forward - 3 | 10.4mile/h |
| Forward - 4 | 17.1mile/h |
| Reverse - 1 | 3.1mile/h |
| Reverse - 2 | 6.8mile/h |
| Reverse - 3 | 11.8mile/h |
| Reverse - 4 | 18.2mile/h |
| Dump | 1.6s |
|---|---|
| Lower, Empty, Float Down | 2s |
| Raise | 7.6s |
| Total Cycle Time | 11.2s |
| Bolt Together Bucket | 6.9yd³ |
|---|---|
| Bucket Capacities | 4.2-5.9 m³ (5.5-7.7 yd³) |
| Dump Bucket - 1 | 5.5yd³ |
| Dump Bucket - 2 - Standard Bucket | 6.3yd³ |
| Dump Bucket - 3 | 7.3yd³ |
| Dump Bucket - 4 | 7.7yd³ |
| Ejector Bucket | 6.3yd³ |
| Articulation Angle | 42.5° |
|---|---|
| Axle Oscillation | 10° |
| Inner Clearance Radius* | 129.6in |
| Note | *Clearance dimensions are for reference only. |
| Outside Clearance Radius* | 261.3in |
| Tire Size | 18 × R25 |
|---|
| Cooling System | 16.1gal (US) |
|---|---|
| Engine Crankcase - With Filter | 8.98gal (US) |
| Front Differential and Final Drives | 21.1gal (US) |
| Fuel Tank | 105.7gal (US) |
| Hydraulic Tank | 33gal (US) |
| Rear Differential and Final Drives | 21.1gal (US) |
| Secondary Fuel Tank - If Equipped | 87.2gal (US) |
| Transmission | 12.4gal (US) |
| Standards | ROPS/FOPS Certified Cab |
|---|
