| Capacity at Maximum Height (o/r Down) | 7000lb |
|---|---|
| Capacity at Maximum Height (o/r Up) | 7000lb |
| Capacity at Maximum Reach (o/r Down) | 2700lb |
| Capacity at Maximum Reach (o/r Up) | 1100lb |
| Drawbar Pull - Loaded | 21582lbf |
| Frame Leveling | 10° |
| Maximum Lift Height | 43ft |
| Rated Load Capacity | 9000lb |
| Top Travel Speed | 19mile/h |
| Turning Radius - Over Tires | 12ft |
| Engine Model | Cat® C3.4B |
|---|---|
| Gross Power - Basic | 111HP |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
| Operating Weight | 26852lb |
|---|
| Optional (1) | 370/75-28 Foam Duraforce |
|---|---|
| Optional (2) | 13.00 × 24 Solid |
| Optional (3) | 14 × 24-16 PR Air |
| Optional (4) | 14 × 24-12 PR Foam |
| Standard | 370/75-28 Duraforce MT |
| Diesel Exhaust Fluid (DEF) Tank | 5.7gal (US) |
|---|---|
| Fuel Tank | 38gal (US) |
| Hydraulic System | 49gal (US) |
| Auxiliary Hydraulic Flow | 25gal/min |
|---|---|
| Auxiliary Hydraulic Pressure | 3481psi |
| Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
| Pump Type | Variable displacement load sensing axial piston pump |
| System Operating Pressure | 3770psi |
| Boom Down | 8.5s |
|---|---|
| Boom Up | 9.9s |
| Tele In | 14.6s |
| Tele Out | 14.5s |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
|---|---|
| Service Brakes | Inboard wet disc brakes on front and rear axles |
| Types (1) | Trunnion mounted planetary 55 degree steer axles. |
|---|---|
| Types (2) | High bias limited slip differential on front axle. |
| Carriages - Dual Fork Positioning | 50in |
|---|---|
| Carriages - Side Shift | 48in |
| Carriages - Standard Rotate | 50in |
| Carriages - Standard Tilt | 50in |
| Carriages - Swing | 100°, 1829 mm, 4028 kg Capacity, 2268 kg Swung (100°, 72 in, 9,000 lb Capacity, 5,000 lb Swung) |
| Carriages - Wide Rotate | 72in |
| Carriages - Wide Tilt | 72in |
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
| Hydraulic IT Coupler | Includes Auxiliary Electrics |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
| Lumber Forks - Option 2 | [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in) |
| Pallet Forks - Option 1 | [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in) |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
| Pallet Forks - Option 3 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
| Forward | 4 speed |
|---|---|
| Reverse | 3 speed |
