The TL1055 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Request a quote
Capacity at Maximum Height (o/r Down) 5000lb
Capacity at Maximum Reach (o/r Down) 2500lb
Drawbar Pull - Loaded 26510lbf
Frame Leveling 10°
Maximum Forward Reach 42ft
Maximum Lift Height 54.9ft
Maximum Lift Height (o/r Down) 54.9ft
Maximum Rated Load Capacity 10000lb
Operating Weight 31700lb
Rated Load Capacity 10000lb
Top Travel Speed 21mile/h
Turning Radius - Over Tires 14.1ft
Engine Model Cat® C3.6L*
Gross Power - Basic 134HP
Note *Meets U.S. EPA Tier 4 Final emission standards.
Optional 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam
Standard 400/75-28 Duraforce Air
Diesel Exhaust Fluid (DEF) Tank 5.7gal (US)
Fuel Tank 38gal (US)
Hydraulic System 49gal (US)
Auxiliary Hydraulic Flow 25gal/min
Auxiliary Hydraulic Pressure 3307psi
Pump Type Variable displacement load sensing axial piston pump
Boom Down 13s
Boom Up 15s
Tele In 15.3s
Tele Out 19.7s
Types (1) Trunnion mounted planetary 55-degree steer axles
Types (2) High bias limited slip differential on front axle
Parking Brakes Wet disc, spring applied hydraulic release on front axle
Service Brakes Inboard wet disc brakes on front and rear axles
Forward 4 Speeds
Reverse 3 Speeds
Buckets: General Purpose - Option 1 1.3yd³
Buckets: General Purpose - Option 2 2yd³
Buckets: Grapple 1.7yd³
Buckets: Multi Purpose 1.3yd³
Carriages: Dual Hydraulic Fork Positioner - Option 1 50in
Carriages: Dual Hydraulic Fork Positioner - Option 2 72in
Carriages: Side Shift 50in
Carriages: Side Tilt - Option 1 50in
Carriages: Side Tilt - Option 2 72in
Carriages: Standard Tilt - Option 1 50in
Carriages: Standard Tilt - Option 2 60in
Carriages: Standard Tilt - Option 3 72in
Carriages: Swing, 100° 72in
Coupler Hydraulic IT Coupler (Includes Auxiliary Electronics)
Fork Extensions* 90in
Fork Mounted - Hook Lifting Hook
Fork Mounted - Hopper Trash Hopper
Fork Mounted - Truss Boom Adjustable 2.1-3.6 m (Adjustable 7-12 ft)
Fork Mounted - Work Platform 1220 mm × 2438 mm (4 ft × 8 ft)
Forks: Block/Cubing 48in
Forks: Lumber 60in
Forks: Pallet - Option 1 48in
Forks: Pallet - Option 2 60in
Forks: Pallet - Option 3 72in
Material Handling Arm Adjustable 2-4 m (Adjustable 6.7-13.2 ft)
Note *For use with 1525 mm (60 in) forks or larger
Truss Booms - Option 1 12ft
Truss Booms - Option 2 15ft
Truss with Winch - Option 1 3ft
Truss with Winch - Option 2 12ft
Operating Weight 31700lb

Standard Equipment:

  • Telescopic Boom
    • Boom angle indicator
  • Electrical
    • Alternator, 60 amp, 12 volt
    • Battery, 12 volt, 1000 CCA
    • Horn
    • Alarm, backup
  • Operator Station
    • Canopy, ROPS/FOPS
    • Joystick, single electronic
    • Adjustable joystick wristrest
    • Grab bars for easy entry
    • Seat - vinyl, suspension with Cat logo
    • Steering wheel spinner knob
    • Floor mat - heavy duty
    • Left side rear view mirror
    • Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
    • Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
    • Park Brake with indicator light
    • Steering Wheel with Cat logo
    • Cat keys and locks
    • Brakes - wet disc service
    • Belt, seat - 3" wide
  • Power Train
    • Engine, Cat C3.6L - 100 kW (134 hp) gross horsepower
    • Thermal starting aid
    • Transmission, Cat PG145 6 speed Power-shift, 4-speed forward, 3-speed reverse
    • Cat filters, hoses and couplings
    • Axles - Dana
    • Steering - 4 wheel
    • Drive - 4 wheel
  • Structure
    • Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
    • Cat IT Coupler
  • Anti-freeze
    • Coolant - Anti-freeze, 50/50 Mix
  • Tires
    • Tires - 370/75-28 Duraforce Air
  • Other Equipment
    • Integrated lift and tie down points
    • Standard Cat color paint
    • Auxillary hydraulics for auxillary attachments (one function)

Optional Equipment:

  • Telescopic Boom
    • Hydraulic IT Coupler (includes Auxiliary Electrics)
  • Electrical
    • Work Light Group: 3 Cab mounted Lights -- 2 forward, 1 rearward; 1 reversing light; 2 Boom mounted Lights, 1 rotating beacon
    • Engine heater block
    • Heater - open cab
    • Road Light Group -- Headlights, Brake Lights, Turn Signals
  • Operator Station
    • Air conditioning
    • Single Joystick - with Rocker Switch
    • EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)
    • Skylight Wiper
    • Brick guard - Front and top.
  • Tires
    • Tires - 370/75-28 Duraforce Foam Fill
    • Tires - 315/95-28 Telemaster Solid
    • Tire - 14.00-24 16PR Air
    • Tire - 14.00-24 12 PR Foam
    • Tires - 370/75-28 Non-Marking Air
  • Other Equipment
    • Fenders
    • Tow Hook - Pintle Type
    • Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater
  • Work Tools
    • Carriage - side shift, 50 in. (available from factory)
    • Lifting Hook - fork mounted (available from factory)
    • Truss Broom
    • Carriage - standard tilt, 50 in. (available from factory)
    • Carriage - standard rotate, 50 in. (available from factory)
    • Carriage - swing, 72 in., 100 degrees, 9,000 lb. capacity, 5,000 lb. swung (available from factory)
    • Pallet Forks - two 60 in, 2 in x 6 in, 9,000 lb. capacity per pair (available from factory)
    • Pallet Forks - two 48 in, 2.36 in x 4 in, 9,000 lb. capacity per pair (available from factory)
    • Cubing Forks - two 48 in, 2 in x 2 in, 3,800 lb. capacity per pair (available from factory)
    • Bucket - General Purpose 1.3 Cu. Yd.
    • Bucket - Material Handling 1.95 Cu. Yd.
    • Bucket - Multi-Purpose, 1.3 Cu. Yd.
    • Work Platform -- 8 ft x 4 ft with maximum capacity of 1,000 lbs. Includes enclosed fork pockets, side entry/exit gate, removable front rail and wire mesh floor
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader