New TL1055D Telehandler in North Carolina

Back to

The TL1055D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Pricing: From $256,302.45*

Additonal Note:

* Taxes, shipping & handling, surcharges, assembly charges, destination, freight and/or delivery charges are not included. This is not an offer for sale. Displayed pricing is for informational purposes only. The pricing shown above utilizes the Manufacturer's Suggested Retail Price (MSRP) that is published for the machine (without any attachments or protection plans) as described above. The actual prices and terms and conditions of sale for all products are to be solely determined by the selling
Request a quote
Capacity at Maximum Height (o/r Down) 5000lb
Capacity at Maximum Reach (o/r Down) 2500lb
Drawbar Pull - Loaded 25605lbf
Frame Leveling 10°
Maximum Forward Reach 42ft
Maximum Lift Height (o/r Down) 54.9ft
Rated Load Capacity 10000lb
Top Travel Speed 20.5mile/h
Turning Radius - Over Tires 14.1ft
Engine Model Cat® C4.4 ACERT™*
Gross Power - Basic 142.1HP
Note *Meets U.S. EPA Tier 4 Final emission standards.
Optional 400/75-28 Foam Filled; 14.00-24 Solid; 14.00 × 24 16PR; 14.00 × 24 12PR Foam Filled
Standard 400/75-28 Duraforce
Diesel Exhaust Fluid (DEF) Tank 5.7gal (US)
Fuel Tank 38gal (US)
Hydraulic System 49gal (US)
Auxiliary Hydraulic Flow 25gal/min
Auxiliary Hydraulic Pressure 3307psi
Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
Pump Type Variable displacement load sensing axial piston pump
System Operating Pressure 3771psi
Boom Down 13s
Boom Up 15s
Tele In 16.3s
Tele Out 18.5s
Operating Weight 31879lb
Parking Brakes Wet disc, spring applied hydraulic release on front axle
Service Brakes Inboard wet disc brakes on front and rear axles
Types (1) Trunnion mounted planetary 55 degree steer axles.
Types (2) High bias limited slip differential on front axle.
Carriages - Dual Positioning 50in
Carriages - Side Shift 48in
Carriages - Standard Rotate 50in
Carriages - Standard Tilt 50in
Carriages - Swing 100°, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100°, 72 in, 10,000 lb Capacity, 5,000 lb Swung)
Carriages - Wide Rotate 72in
Carriages - Wide Tilt 72in
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Fork Extensions* 90in
Hydraulic IT Coupler Includes Auxiliary Electrics
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Note *For use with 1829 mm (72 in) Lumber Forks.
Pallet Forks - Option 1 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Forward 4 speed
Reverse 3 speed
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader