6060 Electric Hydraulic Mining Shovel

Frequency	50 Hz / 60 Hz
Maximum Starting Current	6.0 kV / 480 A
Output (nominal rated)	2 x 1000 kW
Rated Current IN	6.0 kV / 235 A
Speed	1,500 min-1/50Hz
Type	2 × Squirrel cage induction motor
Voltage	6.0 / 6.6 / 7.2 V

Batteries in Series Installation	2 × 210 Ah – 12 V each
Cab Heating Voltage	230V
Control System Voltage	24V
Power Take Off	1 × single phase (10 A, 230 V, 2.23 kW) 1 × three phase (4 A, 400 V, 2.8 kW)

Ground Pressure – Backhoe	37.4psi
Ground Pressure – Face Shovel	37.3psi
Note	Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.
Operating Weight – Backhoe	1278430lb
Operating Weight – Face Shovel	1278430lb
Payload – Backhoe	143300lb
Payload – Face Shovel	134482lb
Standard Track Pads – Backhoe	55in
Standard Track Pads – Face Shovel	55in

Grease Tank	710 L (188 gal)
Hydraulic System - Including Tank	2483gal (US)
Hydraulic Tank	1876gal (US)
Pump Pre-Chambers at Pump Transmission Gearbox	2 x 14 L (2 x 3.7 gal)
Pump Transmission Gearbox including Cooling Circuit	2 x 103 L (2 x 27.2 gal)
Swing Drive	4 x 38 L (4 x 10.0 gal)
Travel Gearbox Brake Chambers	4 x 0.5 L (2 x 0.13 gal)
Travel Gearbox Planetary	2 x 120 L (2 x 31.7 gal)
Travel Gearbox Spur Gear	2 x 19 L (2 x 5.0 gal)

Main Pumps	8 variable flow axial piston pumps
Main Pumps - Maximum Pressure - Attachment	4640psi
Main Pumps - Maximum Pressure - Travel	5220psi
Main Pumps - Maximum Total Oil Flow	8 x 650 L/min (8 x 172 gal/min)
Swing Pump	4 reversible swash plate pumps
Swing Pump - Maximum Flow - Swing	4 x 352 bar (4 x 93 psi)
Swing Pump - Maximum Pressure - Swing	5076psi

Components	4 cooling fans
Diameter - Fan	46in
Features (1)	Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Features (2)	Fan speed and flow of oil to the coolers are thermostatically controlled
Oil Flow of Cooling Pumps	4 x 488 L/min (4 x 129 gal/min)

Features (1)	Closed-loop swing circuit with torque control
Maximum Swing Speed	3.8r/min
Parking Brakes	Wet multiple-disc brake, spring-loaded/hydraulically released
Swing Drive	4 compact planetary transmissions with axial piston motors
Swing Ring	Triple-race roller bearing with sealed internal gearing

Bottom Rollers - Each Side	7
Gradeability - Travel Drives - Maximum	38.8%
Maximum Tractive Force	661160lb
Parking Brake	Wet multiple disc brake, spring loaded/hydraulically released
Support Rollers - Each Side	2 plus a skid plate in between
Track Pads - Each Side	42
Travel Drives - Each Side	1 planetary transmission with 2 two-stage axial piston motors
Travel Speed - 1st Stage - Maximum	0.68mile/h
Travel Speed - 2nd Stage - Maximum	0.99mile/h

Components (5)	Operator Protective Guard (Top Guard) (ISO 10262:1998 Level II)
Internal Dimensions of Cab - Height	6.75ft
Internal Dimensions of Cab - Length	7.33ft
Internal Dimensions of Cab - Width	5.33ft
Operator's Eye Level - Approximately	24.91ft

Maximum Digging Depth	9.17ft
Maximum Digging Height	51.17ft
Maximum Digging Reach	54.17ft

Maximum Digging Depth	29.17ft
Maximum Digging Height	52.83ft
Maximum Digging Reach	62.33ft

Maximum Breakout Force	388780lb
Maximum Crowd Force	494410lb

Bucket Digging Force - ISO	274840lb
Stick Digging Force - ISO	295740lb

Backhoe (heaped 1:1)	44.5yd³
Face Shovel (heaped 2:1)	44.5yd³

Standard Equipment:

Pressurized high voltage switch cabinet: – Load break switch – Main, motor, and transformer fuses – Voltage and current transformers – Vacuum contactors for motor control – Ground fault detection – Auxiliary transformer
Power factor correction

Hydraulic Optimization
Cat^® Hydraulic Hose Assemblies
Cat pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic oil flow reduction – Reduced oil flow at high hydraulic oil temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (200 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS only)

2 batteries
Lockable 24 V system isolator switch
Low voltage switch cabinet: – Motor Protection Relay (MPR) – 24 V and 400 V power supply – Active power converter – Phase sequence indication – Circuit breakers
13 LED high-brightness working flood lights
19 LED service lights
2 acoustic travel alarms – forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)

HD tracks with cast double-grouser track pads
1400 mm (4 ft 7 in) wide track pads
1600 mm (5 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Slip ring in undercarriage
Cable guide with junction box at undercarriage

Rectangular grease container (fill via service arm)
Lubricated pinion in swing ring
Grease filters (200 μm)

Dual hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
USB Charging
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Cat Vision 360 with 254 mm (10 in) HD color technology display
Level indicators for length and crosswise inclination
Document storage

Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)

Hydraulic oil exchange interval – 10,000 hours
S·O·SSM ports
Retractable ground-level service station with quick couplings for: – Pump transmission gear oil – left/right engines – Hydraulic oil – Grease – Swing transmission gear oil
Cat battery charging connector
Dirt wiper at swivel
Cat Electronic Technician service port
Indicator lights

Cat Payload
Cat Vision 360
Operator Assist: Enhanced Motion Control
Cat Product Link^™ Elite
Cat Minestar^™ Solutions Ready

Emergency stop switches: 2 in cab, 5 in power module, 1 at ground-level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Operator presence switch

ISO or ANSI decals

Optional Equipment:

Electric Motor (6.6 kV – 50 Hz)
Electric Motor (6.0 kV – 50 Hz)
Electric Motor (7.2 kV – 60 Hz)

TriPower Face Shovel kinematics: – Horizontal automatic constant-angle bucket guidance – Vertical automatic constant-angle bucket guidance – Automatic roll-back limiter to prevent material spillage – Kinematic assistance to hydraulic forces – Constant boom momentum throughout the whole lift arc – Crowd force assistance – Guards for shovel cylinders at FS stick
Backhoe Attachment

Cold Weather Package: – Hydraulic oil heater with thermostat – Hydraulic oil cooler bypass valves – Auxiliary preheating system for cab – Recommended for temperatures below –10° C (14° F)

Cat Product Link Elite Dual Mode (Cellular and Satellite)

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

review us on

Tom Corona

2 months ago

Rich Stidd

2 months ago

Carlos Virgilio Sauceda Rivera

4 months ago

John Karpathian

6 months ago

Clean store and great employees

Hunter Flaugher

11 months ago

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

1 year ago

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

2 years ago

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.