Service within 2 days — or when you say.

LEARN MORE

New 6015 Hydraulic Shovel in North Carolina

Back to Home

The next generation Cat® 6015 Hydraulic Shovel lets you move more material at a low cost, so you can achieve production targets, deliver on your commitments, meet deadlines and maximize your profitability. With high tool carrying capacity, increased durability and the most powerful engine in its class, the Cat 6015 generates higher productivity and fuel efficiency than other shovels. And it’s offered with more and better options that let you match your machine to your operation — from access and cold weather packages to multiple stick and track pad options. In addition, a large range of buckets is available, giving you optimum payload and machine efficiency for your operation. And the 6015’s high tool carrying capacity gives you the ability to employ large buckets and move more in fewer cycles.

Pricing: Contact for Pricing

Request a quote

Request a New Equipment Quote

Fill out this form below and we will get back to you within 1 to 2 business days! Alternatively, give us a call at 833-286-3561


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Request Machine Walkaround

    Find a Dealer Near You

    Bucket Payload 16.1ton (US)
    Engine Output - SAE J1995 824hp
    Note Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available.
    Operating Weight 154.3ton (US)
    Engine Model Cat® C27
    Gross Power - SAE J1995 824hp
    Net Power - SAE J1349 812hp
    Bore 5.4in
    Displacement 1648in³
    Number of Cylinders 12
    Stroke 6in
    Engine Model Cat® C27
    Gross Power - SAE J1995 839hp
    Net Power - SAE J1349 829hp
    Aspiration Turbocharged and air-to-air aftercooled
    Bore 5.4in
    Displacement 1648in³
    Number of Cylinders 12
    Stroke 6in
    Operating Weight 154ton (US)
    Ground Pressure 23.6psi
    Note Operating weight includes: 700 mm (28 in) track pads, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants
    Operating Weight 308000lb
    Extra Wide 39in
    Number of Carrier Rollers - Each Side 3
    Number of Shoes - Each Side 46
    Number of Track Rollers - Each Side 9
    Standard 28in
    Track Pads Heavy Duty (HD) with double grouser
    Wide 35in
    Gradeability - Travel Drives Approximately 42%
    Hydraulic Track Tensioning With accumulator
    Maximum Drawbar Pull 179847lbf
    Maximum Drawbar Pull - Forward 192886lbf
    Maximum Drawbar Pull - Reverse 220987lbf
    Travel Speed - Two Stages - 1st Stage - Maximum 1.6mile/h
    Travel Speed - Two Stages - 2nd Stage - Maximum 2.3mile/h
    Cooling System 44gal (US)
    Engine Oil 23gal (US)
    Fuel Tank 449gal (US)
    Grease Tank 57gal (US)
    Hydraulic System - Including Tank 463gal (US)
    Hydraulic Tank 253gal (US)
    Swing Drive 2.4gal (US)
    Alternator Rating 150 A (24 V) in total
    Batteries 4 × 200 Ah (12 V each)
    Components (1) Emergency stop switches: one in cab, three in engine module, one pull rope accessible from ground level
    Components (2) Four maintenance free batteries
    Components (3) Lockable battery isolation switch
    Components (4) 5 LED service lights
    Components (5) 14 LED high-brightness working lights
    Components (6) 2 electric horns
    Components (7) Two (2) lights for rear end
    Components (8) One (1) light for machine deck/service
    Components (9) One (1) beacon light on cabin roof
    System Voltage 24 V
    Engine Fan Pump 1 × variable swash plate pump
    Engine Fan Pump - Maximum Flow, Engine Fan 53.1gpm
    Engine Fan Pump - Maximum Pressure, Engine Fan 3191psi
    Filters (1) Full-flow high-pressure filters (200 μm) for main pumps
    Filters (2) Full-flow filters (20 μm), return circuit
    Filters (3) Pressure filters (16 μm), servo circuit
    Filters (4) Full-flow filters (6 μm), cooling return circuit
    Filters (5) Swing charge filter (15 μm)
    Filters (6) Pump case return screens (125 μm)
    Hydraulic Fan Pump 1 × variable swash plate pump
    Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan 22.7gpm
    Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan 1958psi
    Hydraulic Oil Cooling - Diameter of Fan 46in
    Hydraulic Oil Cooling - Maximum Flow 284gpm
    Main Pumps 3 × variable swash plate pumps
    Main Pumps - Maximum Pressure - Attachment 4641psi
    Main Pumps - Maximum Pressure - Travel 4641psi
    Main Pumps - Maximum Total Oil Flow 407gpm
    Pilot Pump 1 × gear pump
    Pilot Pump - Maximum Flow, Pilot 40.4gpm
    Pilot Pump - Maximum Pressure, Pilot 1378psi
    Swing Pump 1 × variable swash plate pump
    Swing Pump - Maximum Flow - Swing 127gpm
    Swing Pump - Maximum Pressure - Swing 5294psi
    Features (1) Closed-loop with torque control
    Features (2) Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
    Features (3) All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
    Maximum Swing Speed 4.9r/min
    Parking Brake Wet multiple disc brake, spring-loaded/hydraulically released
    Swing Drive Two (2) compact planetary transmissions with axial piston motors
    Swing Ring Triple-race roller bearing with sealed internal greasing
    Emissions U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1
    Equipped With (1) One pull rope emergency stop
    Equipped With (2) Quick couplings for: diesel fuel and grease
    Feature Accessible from ground level for diesel fuel and grease
    Components (1) Heavy Duty (HD) with double-grouser track pads
    Components (2) Chain links connected by hardened pins and bushings
    Components (3) Postive Pin Retention (PPR2) sealed and greased track design
    Components (4) Hardened running surfaces of sprockets, idlers, rollers and track chain links
    Components (5) Fully hydraulic self-adjusting track tensioning system with accumulator
    Components (6) Automatic hydraulic retarder valve
    Components (7) Acoustic travel alarm (forward and reverse)
    Gradeability - Travel Drives 38°/78% (SAE J1309)
    Hydraulic Track Tensioning With accumulator
    Maximum Drawbar Pull - Reverse 220987lbf
    Maximum Tractive Force 197157lbf
    Number of Carrier Rollers - Each Side 3
    Number of Shoes - Each Side 46
    Number of Track Rollers - Each Side 9
    Travel Speed - Two Stages - 1st Stage - Maximum 1.6mile/h
    Travel Speed - Two Stages - 2nd Stage - Maximum 2.3mile/h
    Components (1) Pressurized cab with positive filtration
    Components (10) FM/AM radio with MP3 auxiliary port
    Components (11) Two stereo speakers
    Components (12) Storage shelf suitable for lunch or toolbox
    Components (13) Color LCD display with service parameters, event and diagnostic annunciation, preventative maintenance, trip total, lifetime totals. Gauges for engine speed, engine oil pressue, and hydraulic oil temperature
    Components (14) Head and arm rests
    Components (15) Independently adjustable seat consoles with integrated joysticks
    Components (16) Neutral lever (lock out) for all controls
    Components (17) Travel control pedals with removable hand levers
    Components (18) Two power outlets, 10 amp (total)
    Components (19) Laminated front upper window and tempered glass other windows
    Components (2) Heated cab mirror
    Components (3) Sliding upper door window
    Components (4) Glass-breaking safety hammer
    Components (5) Removeable lower windshield within cab storage
    Components (6) Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM
    Components (7) Beverage holder
    Components (8) Literature holder
    Components (9) AM/FM radio
    Capacity - Grease Barrel 18gal (US)
    Type (1) Central bank lubrication system
    Type (2) Grease is automatically applied to all attachment pivot points, slew bearing, and bucket linkage
    Type (3) Standard grease reel on machine for bucket linkage
    Type (4) Grease refill service point accessible from ground
    Buckets Equipped With – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds
    Type (1) Boom and stick torsion-resistant with welded box design
    Type (2) High-tensile steel with solid steel castings at pivot areas
    Type (3) Boom and stick stress-relieved after welding
    Type (4) Float valve for boom down function
    Maximum Digging Depth 26.3ft
    Maximum Digging Height 41.9ft
    Maximum Digging Reach 45.6ft
    Maximum Dump Height 27.9ft
    Bucket Digging Force - ISO 120947lbf
    Bucket Digging Force - SAE 112600lbf
    Stick Digging Force - ISO 104761lbf
    Stick Digging Force - SAE 98800lbf
    Capacity 1:1 10.6yd³
    Maximum Material Density - Loose 3030lb/yd³
    Number of Teeth 5
    Tooth System Cat C70 or M75
    Total Width 8.8ft
    Weight - Including Standard Wear Package 18521lb

    Standard Equipment:

    • Cat C27 Engine
    • Aftertreatment system (used in Tier 4 Final only): – Diesel Oxidation Catalyst (DOC) – NOx Reduction System (NRS) – Non-Diesel Exhaust Fluid (DEF) solution
    • Air-to-Air After Cooling (ATAAC)
    • Turbocharger
    • Hydraulically driven radiator fan
    • Electronically controlled fan speed
    • Micro processed engine management
    • Heavy-duty air filters
    • Two stage fuel filtration with water separator
    • High-capacity water seperator
    • Starting aid -- automatic ether
    • Exhaust system heat shields
    • Dual 24 V electric starters
    • Automatic engine idle shut down
    • Automatic fuel priming
    • Power Management System with integrated controls: – Flow-on-demand management of implement/travel (3) and swing (1) pumps – Load Enhanced Anticipatory Control (LEAC) to prevent engine lug – Proportional Priority Pressure Compensating (PPPC) technology prioritizes pump flow and pressure to individual functions (boom, stick, and bucket) during simultaneous operations
    • Pressure cut-off for main pumps
    • Cat Hydraulic Hose assemblies
    • Cooling of pump transmission gear oil
    • Closed loop swing circuit
    • Parking brake enabled switch
    • Anti drift swing logic
    • Pressure testing points
    • Full-flow high-pressure filters (200 μm), main pumps
    • Full-flow filters (20 μm), return circuit
    • Full-flow filters (6 μm), cooling return circuit
    • Pressure filters (6 μm), servo circuit
    • Swing charge filters (15 μm)
    • Pump case return screens (125 μm)
    • Boom float valves and regeneration circuit
    • Stick float valve (FS)
    • Four maintenance-free batteries
    • Lockable battery isolator switch
    • Lockable starter isolator switch
    • 14 LED high-brightness working flood lights
    • 5 LED service lights
    • 2 acoustic travel alarms – forward and reverse (power module, oil cooler module)
    • Two electric horns
    • Positive Pin Retention (PPR2) sealed and greased track design
    • Heavy Duty (HD) tracks with cast double-grouser track pads
    • HD fixed axle rollers
    • HD fixed axle idlers
    • HD undercarriage protection: - Propel motor guard - Propel tube guards - Slew bearing lube line protection
    • Automatic hydraulic retarder valve
    • Acoustic travel alarm (forward and reverse)
    • Travel motor covers with service doors
    • Hardened running surfaces of sprockets, idlers, rollers and track chain links
    • Fully hydraulic self-adjusting track tensioning system with accumulator
    • Grease container, 215 L (57 gal) capacity
    • Grease is automatically applied to all attachment pivot points, slew bearing and bucket linkage
    • Grease filters (200 μm)
    • Single HVAC system
    • Pressurized cab with positive filtration
    • Travel control pedals with removable hand levers
    • Pneumatically cushioned and multi adjustable comfort seat with: – Seat heating – Lumbar support – Two-point safety belt – Head and arm rests
    • Sliding upper door window
    • Removable lower windshield within cab storage
    • Independently adjustable seat consoles with integrated joysticks
    • Neutral lever (lock out) for all controls
    • Two power outlets, 10 amp total
    • Electronic-Hydraulic Servo Control
    • Joystick controls alternate patterns (ISO/JIS, BHL, MHI, KOBE, or SCM)
    • FM/AM radio with MP3 auxiliary port
    • Sliding side window
    • Wiper/washer for lower and upper windshield
    • Roller blind at windshield
    • Color LCD 178 mm (7") touchscreen display includes: – Service parameters for engine, hydraulics, and lubrication – Event and diagnostic annunciation – Gauges for engine speed, engine oil pressure, hydraulic oil temperature – Preventative maintenance – Trip total – Lifetime totals
    • Fixed access ladder
    • Heated cab mirror
    • Document Storage
    • Boom 7.6 m (24 ft 11 in)
    • Boom and stick thermally stress relieved after welding
    • Bucket wear package
    • Wear Package (as per bucket selection)
    • Cat Product Link Elite (Cellular)
    • Cat MineStar Solutions Ready
    • Engine oil exchange interval -- 500 hours
    • Hydraulic oil change interval – 5,000 hours
    • Scheduled Oil Sampling (S·O·SSM) ports
    • Pilot pressure monitoring via Electronic Technician (ET)
    • Centralized service area accessible from ground level for – Diesel fuel – Grease
    • Cat battery charging connector
    • Indicator light for grease
    • Standard lubricant
    • Jump start receptacle
    • ISO or ANSI decals

    Optional Equipment:

    • Aluminum cooling package
    • Mesabi cooling package
    • 700 mm (2 ft 4 in) wide track pads
    • 900 mm (3 ft 0 in) wide track pads
    • 1000 mm (3 ft 3 in) wide track pads
    • Belly plate for additional undercarriage protection
    • Track guards – full
    • Track guards – center
    • HD undercarriage protection: - Propel gearcase cover guard
    • Powered 45° access stairway
    • Camera monitoring system VISION 360 (four cameras and additional color display)
    • Stick 3.4 m (11 ft 2 in)
    • Stick 4.1 m (13 ft 5 in)
    • Frontless base machine (no boom, no stick, no linkage)
    • Cat Product Link Elite (Satellite)
    • Cat Product Link Elite (No radio)
    • Cold Weather Package (120 V): Engine coolant heater - external power source required, 60 Hz
    • Cold Weather Package (240 V): Engine coolant heater - External power source required, 50 Hz
    • Cat Bio HYDO Advanced hydraulic fluid
    • High temperature lubricant
    • Low temperature lubricant
    • Operator Protective Guard (front guard)
    • Additional buckets available, based on application, through your local Cat dealer

    Coming Soon

    Explore the features and Benefits
    of the 6015 Hydraulic Shovel

    What Our Customers Are Saying About Us

    Gregory Poole Equipment Company place picture
    3.9
    Based on 46 reviews
    powered by Google
    David Lawrence profile pictureDavid Lawrence
    13:04 22 Feb 24
    Brandon Pierce profile pictureBrandon Pierce
    22:00 18 Feb 24
    Darin Noe profile pictureDarin Noe
    01:17 16 Feb 24
    Jose Soto profile pictureJose Soto
    15:26 23 Sep 23
    Hunter Elliott profile pictureHunter Elliott
    16:17 07 Sep 23
    Rick Kelly-Crapse profile pictureRick Kelly-Crapse
    21:06 25 Aug 23
    They had all my parts for my 3208 Cat.
    Friendly folks at parts counter.