| Bucket Payload | 44ton (US) |
|---|---|
| Engine Output - SAE J1995 | 2079hp |
| Note | Specifications above apply to the HRC Face Shovel configuration. Backhoe and Frontless configurations are also available for both HRC and LRC. |
| Operating Weight | 453ton (US) |
| Engine Model | 2 x Cat C32B |
|---|---|
| Gross Power - SAE J1995:2014 | 2079hp |
| Net Power - SAE J1349:2011 | 1921hp |
| Note | Power output relates to highly regulated engines. Lesser regulated engines are also available. |
| Aspiration | Turbocharged and air-to-air aftercooled |
|---|---|
| Bore | 5.71in |
| Components (1) | High-capacity water separator |
| Components (2) | Two-stage fuel filter with series filtration |
| Components (3) | Cat Type 4 air filters |
| Components (4) | Microprocessed engine management |
| Displacement | 1959in³ |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards |
| Fuel Tank Capacity | 2060gal (US) |
| Number of Cylinders - Each Engine | 12 |
| Stroke | 6.38in |
| Batteries in Series/Parallel Installation | 6 x 210 Ah - 12 V each; 630 Ah - 24 V in total |
|---|---|
| Components (1) | 6 maintenance-free batteries |
| Components (2) | Lockable battery and starter isolation switches |
| Components (4) | 18 LED high-brightness working flood lights |
| Components (5) | 11 LED service lights |
| System Voltage | 24V |
| 6040 - Ground Pressure | 24.5 N/cm2 (35.5 psi) |
|---|---|
| 6040 - Operating Weight | 905614lb |
| 6040 - Standard Track Pads | 3.9ft |
| 6040 FS - Ground Pressure | 24.5 N/cm2 (35.5 psi) |
| 6040 FS - Note | Other track pads available on request |
| 6040 FS - Operating Weight | 905769lb |
| 6040 FS - Standard Track Pads | 3.9ft |
| Note | 1600 mm track pads available as option |
| Hydraulic Tank Capacity - Diesel Version - Approximately | 958gal (US) |
|---|---|
| Main Pumps - Diesel Version | 4 x Variable Displacement Piston Pumps |
| Main Pumps - Maximum Oil Flow - Diesel Version | 4 x 745 L/min (4 x 197 gal/min) |
| Maximum Pressure - Attachment | 4351psi |
| Maximum Pressure - Swing Pumps | 5080psi |
| Maximum Pressure - Travel | 5076psi |
| Swing Pumps - Diesel Version | 2 x Reversible Variable Displacement Piston Double Pumps |
| Swing Pumps - Maximum Oil Flow - Diesel Version | 2 x 661 L/min (2 x 175 gal/min) |
| Total Volume of Hydraulic Oil - Diesel Version - Approximately | 1532gal (US) |
| Diameter - Fan | 60in |
|---|---|
| Diameter - Fan | 2 × 1524 mm (2 × 60 in) |
| Features (1) | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running |
| Features (2) | Fan speed is thermostatically controlled |
| Oil Flow of Cooling Pumps - Diesel Version | 2 x 798 L/min (2 x 210 gal/min) |
| Features (1) | Dirt wiper |
|---|---|
| Features (2) | Closed-loop with speed control |
| Maximum Swing Speed - Diesel Version | 4.8r/min |
| Parking Brake | Wet multiple disc brake, spring-loaded/hydraulically released |
| Swing Drive | 3 compact planetary transmissions with axial piston motors |
| Swing Ring | Triple-race roller bearing with sealed internal gearing |
| Bottom Rollers - Each Side | 7 |
|---|---|
| Components (1) | All running surfaces of sprockets, idlers, rollers and track links are hardened |
| Components (5) | Fully hydraulic self-adjusting track tensioning system with piston accumulator |
| Components (6) | Automatic hydraulic retarder valve |
| Gradeability - Travel Drives - Maximum | 35.9% |
| Maximum Tractive Force | 397237lb |
| Parking Brake | Wet multiple disc brake, spring applied/hydraulically released |
| Support Rollers - Each Side | 2 plus a skid plate in between |
| Track Pads - Each Side | 42 |
| Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors |
| Travel Speed - 1st Stage - Maximum | 0.87mile/h |
| Travel Speed - 2nd Stage - Maximum | 1.43mile/h |
| Components (1) | Safety switch for automatic motion shutdown |
|---|---|
| Components (10) | External sun shields at side and rear windows |
| Components (11) | Emergency egress ladder |
| Components (12) | Powered 45 access stairway with EH controls and audible alarm plus visual beacon for enhanced safety |
| Components (2) | Pneumatically cushioned and multiadjustable comfort seat with heating and cooling, lumbar support, two-point safety belt, head and arm rests and afety switch for automatic motion shutdown |
| Components (3) | Roller blinds |
| Components (4) | Parallel intermittent wiper/washer |
| Components (5) | All-around safety glass |
| Components (6) | Operator Protective Guard (Top Guard) |
| Components (7) | Dual hydraulically driven HVAC system |
| Components (8) | Independently adjustable seat consoles with integrated joysticks |
| Components (9) | Additional fold-away auxiliary seat with two-point safety belt |
| Internal Dimensions of Cab - Height | 6.75ft |
| Internal Dimensions of Cab - Length | 7.25ft |
| Internal Dimensions of Cab - Width | 5.41ft |
| Operator's Eye Level - Approximately | 23.16ft |
| Capacity - Grease Container | 190gal (US) |
|---|---|
| Type (1) | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times |
| Type (3) | Grease filters (200 µm) |
| Type (4) | Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders |
| Type (5) | Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring |
| All buckets (FS and BH) are equipped with a wear package consisting of: (2) | - Wing shrouds on side walls - Heel shrouds at bottom edges |
|---|---|
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | Automatic roll-back limiter to prevent material spillage |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | Horizontal automatic constant-angle bucket guidance |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | - Constant boom momentum throughout the whole lift arc - Crowd force assistance |
| Type (2) | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
| Type (3) | Wear Package (as per bucket selection) |
| Type (4) | Catwalks with rails at boom (FS and BH) |
| Type (6) | Boom and stick thermally stress relieved after welding |
| Type (8) | Guards for shovel cylinders (FS) |
| Bucket Capacity - Backhoe (heaped 1:1) | 28.8yd³ |
|---|---|
| Bucket Capacity - Face Shovel (heaped 2:1) | 28.8yd³ |
| Installation | Retractable service station installed underneath the engine module and easily accessible from ground |
|---|
