330 GC Excavator | 30 Ton Excavator / Digger

Back to Home

The Cat® 330 GC Excavator balances productivity with easy-to-use controls, a comfortable cab, reduced fuel consumption by up to 12%, and longer maintenance intervals that reduce maintenance costs up to 20% – all to give you a durable, low-cost per- hour excavator for your applications.

Not all features are available in all regions. Consult your Cat dealer for specific configurations available in your region.

Request a quote
Biodiesel Capability Up to B20¹
Bore 4in
Displacement 428in³
Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Engine Model Cat C7.1
Engine Power - ISO 14396 202HP
Engine Power - ISO 14396 (DIN) 205hp (metric)
Net Power - ISO 9249 201HP
Net Power - ISO 9249 (DIN) 204hp (metric)
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Stroke 5in
Note Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight.
Operating Weight 68100lb
Boom Reach 6.15 m (20'2")
Bucket HD 1.54 m³ (2.01 yd³)
Bucket Digging Force - ISO 40200lbf
Maximum Cutting Height 32.9ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 23.3ft
Maximum Digging Depth 23.8ft
Maximum Loading Height 22.8ft
Maximum Reach at Ground Level 35.1ft
Maximum Vertical Wall Digging Depth 19.8ft
Minimum Loading Height 7.5ft
Stick Reach 3.2 m (10'6")
Stick Digging Force - ISO 28300lbf
Main System - Maximum Flow 560 L/min (148 gal/min)
Maximum Pressure - Equipment 5075psi
Maximum Pressure - Swing 4120psi
Maximum Pressure - Travel 5075psi
Maximum Swing Torque 77370ft·lbf
Swing Speed 11.5r/min
Cooling System 6.6gal (US)
DEF Tank 10.8gal (US)
Engine Oil 6.6gal (US)
Final Drive - Each 1.5gal (US)
Fuel Tank Capacity 125.2gal (US)
Hydraulic System - Including Tank 81.9gal (US)
Hydraulic Tank 38.8gal (US)
Swing Drive - Each 2.6gal (US)
Boom Reach 6.15 m (20'2")
Bucket HD 1.54 m³ (2.01 yd³)
Counterweight Clearance 3.7ft
Ground Clearance 1.6ft
Handrail Height 10ft
Length to Center of Rollers 13.1ft
Shipping Height - Top of Cab 10ft
Shipping Length 34.2ft
Stick Reach 3.2 m (10'6")
Tail Swing Radius 10.3ft
Track Gauge 8.6ft
Track Length 15.11ft
Transport Width 10.5ft
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).
Recyclability 97%

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Cab
    • Rollover protective structure (ROPS)
    • Mechanical-suspension seat (All regions except Europe)
    • Air-suspension seat (Europe only)
    • High-resolution 203 mm (8 in) LCD touchscreen monitor
  • Cat Technology
    • VisionLink®
    • Remote Flash
  • Electrical System
    • Two 1,000 CCA maintenance free batteries
    • Programmable time-delay LED working lights
    • LED chassis light, left-hand/right-hand boom lights, cab lights
  • Engine
    • Cat C7.1 single turbo diesel engine
    • Two selectable power modes
    • Auto engine speed control
    • Auto engine idle shutdown
    • 52°C (125°F) high-ambient cooling capacity with de-rate
    • Double element air filter with integrated precleaner
    • Reversing electric cooling fans
  • Hydraulic System
    • Boom and stick regeneration circuits
    • Auto warm up
    • Auto two-speed travel
    • Boom and stick drift reduction valve
  • Safety And Security
    • Auto hammer stop
    • Rearview camera
    • Right-hand-sideview camera
    • Ground-level engine shutoff switch
    • Lockable disconnect switch
    • Right-hand handrail and handhold
    • Signaling/warning horn
  • Service And Maintenance
    • Scheduled Oil Sampling (S·O·S℠) ports
    • Ground-level and platform-level engine oil dipsticks
    • Integrated vehicle health management system
  • Undercarriage And Structures
    • Tie-down points on base frame
    • 6700 kg (14,770 lb) counterweight (All regions except Japan)
    • 5800 kg (12,790 lb) counterweight (Japan only)

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Booms And Sticks
    • 6.15 m (20'2") Reach boom
    • 5.55 m (18'2") Mass boom
    • 3.75 m (12'4") Reach stick
    • 3.2 m (10'6") Reach stick
    • 2.65 m (8'8") Reach stick
    • 2.5 m (8'2") Mass stick
  • Cat Technology
    • VisionLink Productivity
  • Engine
    • -32°C (-25°F) cold start capability
  • Hydraulic System
    • Boom and stick lowering check valves
    • SmartBoom (Europe only)
    • Hammer return filter circuit
    • Tool Control (two pump, one/two way high-pressure flow)
    • Medium-pressure circuit
    • Quick coupler circuit
  • Safety And Security
    • Swing alarm
    • Inspection lighting
  • Service And Maintenance
    • Electric refueling pump with auto shutoff
  • Undercarriage And Structures
    • Long narrow undercarriage
    • 600 mm (24") triple grouser shoes
    • 600 mm (24") HD triple grouser shoes
    • 700 mm (28") HD triple grouser shoes
    • 800 mm (31") triple grouser shoes
    • 900 mm (35") triple grouser shoes
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader