New 335 Hydraulic Excavator in North Carolina

Back to Home

The Cat® 335 Excavator brings high performance with simple-to-use technologies to boost operator efficiencies up to 45%. Combine these features with a compact radius design, an ergonomic cab, longer maintenance intervals, and a power system that is more efficient, and you have a low cost-per-unit of production excavator.

Pricing: Contact for Pricing

Request a quote
Biodiesel Capability Up to B20¹
Bore 4in
Displacement 428in³
Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Engine Model C7.1
Engine Power - ISO 14396 275hp
Engine Power - ISO 14396 (DIN) 279hp (metric)
Net Power - ISO 9249 273hp
Net Power - ISO 9249 (DIN) 277hp (metric)
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Stroke 5in
Note Long undercarriage Reach boom, R3.2 (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 600 mm (24") triple grouser shoes, 5000 kg (11,202 lb) counterweight and 3440 mm (11'3") blade.
Operating Weight 77000lb
Boom Reach 6.15 m (20'2")
Bucket HD 1.54 m³ (2.01 yd³)
Bucket Digging Force - ISO 46482lbf
Maximum Cutting Height 36.6ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 22.4ft
Maximum Digging Depth 22.9ft
Maximum Loading Height 26.1ft
Maximum Reach at Ground Level 34.9ft
Maximum Vertical Wall Digging Depth 19ft
Minimum Loading Height 9.5ft
Stick Reach 3.2 m (10'6")
Stick Digging Force - ISO 32319lbf
Main System - Maximum Flow 560 l/min (148 gal/min)
Maximum Pressure - Equipment 5075psi
Maximum Pressure - Swing 4175psi
Maximum Pressure - Travel 5075psi
Maximum Swing Torque 79455ft·lbf
Swing Speed 10.8r/min
Cooling System 3.3gal (US)
DEF Tank 7gal (US)
Engine Oil 6.6gal (US)
Final Drive - Each 1.8gal (US)
Fuel Tank Capacity 97.2gal (US)
Hydraulic System - Including Tank 92.5gal (US)
Hydraulic Tank 40.7gal (US)
Swing Drive - Each 2.9gal (US)
Boom Reach 6.15 m (20'2")
Bucket HD 1.54 m³ (2.01 yd³)
Counterweight Clearance 3.8ft
Ground Clearance 1.6ft
Handrail Height 11.2ft
Length to Center of Rollers 13.3ft
Shipping Height - Top of Cab 10.7ft
Shipping Length 32.2ft
Stick Reach 3.2 m (10'6")
Tail Swing Radius 6.2ft
Track Gauge 9ft
Track Length 16.5ft
Transport Width 11ft
Note (1) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 kg (1.98 lb) of refrigerant which has a CO2 equivalent of 1.287 metric tonnes (1.418 tons).
Recyclability 98%

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 6.15 m (20'2") Reach boom
  • Cab
    • Rollover protective structure (ROPS)
    • Air-adjustable seat with heat (Deluxe only)
    • Auto-adjustable seat with heat and air ventilation (Premium only)
    • High-resolution 254 mm (10 inch) LCD touchscreen monitor
  • Cat Technology
    • VisionLink®
    • Remote Flash
    • Remote Troubleshoot
    • Cat Grade 2D
    • Cat Assist
  • Electrical System
    • Maintenance-free batteries
    • LED chassis light, left-hand/right-hand boom lights, cab lights -1800 lumens
    • Centralized electrical disconnect switch
    • Programmable time delay working lights after engine shutdown
  • Engine
    • Cat C7.1 twin turbo diesel engine
    • Three selectable modes: Power, Smart, Eco
    • 52°C (126° F) high-ambient cooling capacity with derate
    • -18°C (0° F) cold start capability
    • Sealed double element air filter with integrated precleaner
    • 1 x 145 Amp. dual alternator
    • Electric fuel priming pump
    • Hydraulic and reversible demand fan
    • Two-stage fuel filtration system with water separator and indicator
  • Hydraulic System
    • Electric main control valve
    • Boom and stick regeneration circuits
    • Auto hydraulic oil warm up
    • Auto two-speed travel
    • Boom and stick drift reduction valve
    • Element type main hydraulic filter
  • Safety And Security
    • 2D E-Fence
    • Auto hammer stop
    • Rear- and right-side-view cameras
    • Right-hand handrail and hand hold
    • Service platform with anti-skid plate and countersunk bolts
    • Hydraulic lockout lever neutralizes all controls
    • Ground level-accessible secondary engine shutoff switch in cab
    • Lockable disconnect switch
    • Signaling/warning horn
  • Service And Maintenance
    • Scheduled Oil Sampling (S·O·S℠) ports
    • Grouped location for engine oil and fuel filter
    • Integrated vehicle health management system
  • Undercarriage And Structures
    • Grease lubricated track
    • Tie down points on base frame

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 3.2 m (10'6") Reach stick
    • 3.75 m (12'4") Reach stick
  • Cab
    • Cat Stick Steer
    • Auxiliary relay
  • Cat Technology
    • VisionLink Productivity
    • Cat Grade Connectivity
    • Cat Grade 2D with Attachment Ready Option (ARO)
    • Cat Grade 3D single GNSS
    • Cat Grade 3D dual GNSS
    • Cat Tilt Rotator (TRS) Integration
    • Operator Coaching
  • Engine
    • -32° C (-25° F) cold start capability
  • Hydraulic System
    • SmartBoom (Europe only)
    • Hydraulic efficiency monitoring
  • Safety And Security
    • Cat Command (remote control)
    • 360° visibility
    • Swing alarm
    • Inspection lighting
  • Undercarriage And Structures
    • 5000 kg (11,020 lb) counterweight
    • 7700 kg (16,980 lb) counterweight
    • 600 mm (24") triple grouser track shoes
    • 700 mm (28") triple grouser track shoes
    • 850 mm (33") triple grouser track shoes
    • 3440 mm (11'3") blade
    • 3600 mm (11'10") blade
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader