New 317 Hydraulic Excavator in North Carolina

Back to Home

The 317 Hydraulic Excavator boosts productivity on your jobsite. Standard, easy-to-use Cat® technologies, performance upgrades, and low fuel and maintenance costs allow you to move material all day with speed and precision while keeping more money in your pocket.

Pricing: Contact for Pricing

Request a quote
Biodiesel Capability Up to B20¹
Bore 4in
Displacement 220in³
Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Engine Model Cat C3.6
Engine Power - ISO 14396 134HP
Engine Power - ISO 14396 (DIN) 136hp (metric)
Net Power - ISO 9249 133HP
Net Power - ISO 9249 (DIN) 134hp (metric)
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Stroke 5in
Operating Weight 40200lb
Boom Reach 5.1 m (16'9")
Bucket GD 0.76 m³ (0.99 yd³)
Bucket Digging Force - ISO 27650lbf
Maximum Cutting Height 29.1ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 20.2ft
Maximum Digging Depth 21ft
Maximum Loading Height 20.6ft
Maximum Reach at Ground Level 29.6ft
Maximum Vertical Wall Digging Depth 16.3ft
Minimum Loading Height 6.5ft
Minimum Working Equipment Radius 9.6ft
Stick Reach R2.9 m (9'6")
Stick Digging Force - ISO 16860lbf
Main System - Maximum Flow 296 L/min (78 gal/min)
Maximum Pressure - Equipment 5076psi
Maximum Pressure - Swing 3741psi
Maximum Pressure - Travel 5076psi
Maximum Swing Torque 47647ft·lbf
Swing Speed 8.7r/min
Cooling System 5.8gal (US)
DEF Tank 5.9gal (US)
Engine Oil 2.9gal (US)
Final Drive - Each 1.6gal (US)
Fuel Tank Capacity 71.6gal (US)
Hydraulic System - Including Tank 24.8gal (US)
Hydraulic Tank 23gal (US)
Boom Reach 5.1 m (16'9")
Bucket GD 0.76 m³ (0.99 yd³)
Counterweight Clearance 3.3ft
Ground Clearance 1.4ft
Handrail Height 9.6ft
Length to Center of Rollers 10.4ft
Shipping Height - Top of Cab 9.6ft
Shipping Length 28.1ft
Stick Reach R2.9 m (9'6")
Tail Swing Radius 8.2ft
Track Gauge 6.5ft
Track Length 13ft
Transport Width 8.8ft
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes.

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 5.1 m (16'9") Reach Boom
  • Cab
    • Rollover protective structure (ROPS)
    • Deluxe Cab: air suspension heated seat, 10" touch screen monitor
  • Cat Technologies
    • Cat Product Link
    • Remote Flash
    • Remote Troubleshoot
    • Cat Grade with 2D
    • Cat Assist
    • Cat Payload
    • 2D E-Fence
    • Work tool recognition
    • Work tool tracking
    • Auto hammer stop
  • Electrical System
    • Maintenance free battery
    • LED chassis light, left-side/right-side boom lights, cab lights
    • Programmable time-delay LED working lights
  • Engine
    • Cat C4.4 single turbo diesel engine
    • One-touch low idle with automatic engine speed control
    • Automatic engine shutdown
    • Electric fuel priming pump
    • Two-stage fuel filtration system with water separator and indicator
    • Sealed double element air filter with integrated precleaner
    • Electric cooling fans
    • Biodiesel capability up to B20
  • Hydraulic System
    • Boom and stick regeneration circuit
    • Auto hydraulic warm up
    • Auto two speed travel
    • Electric main control valve
    • Boom and stick drift reduction valve
    • Element-type main hydraulic filter
    • Single-type electronic main pump
  • Safety And Security
    • Rear and right-side-view cameras
    • Ground-level engine shutoff switch
    • Service platform with anti-skid plate and countersunk bolts
    • Signaling/warning horn
    • Hydraulic lock out lever
  • Service And Maintenance
    • Side entry to service platform
    • Grouped engine oil and fuel filters
    • Ground-level engine oil dipstick
    • Sampling ports for Scheduled Oil Sampling (S·O·S)
  • Undercarriage And Structures
    • Grease lubricated track link
    • Tie down points on base frame

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 2.6 m (8'6") Reach stick
    • 2.9 m (9'6") Reach stick
    • 2.9 m (9'6") Thumb Ready stick
    • 3.1 m (10'2") Reach stick
  • Cab
    • Cat Stick Steer
    • Auxiliary relay
  • Cat Technologies
    • Cat Grade with Advanced 2D
    • Cat Grade with 3D single GNSS
    • Cat Grade with 3D dual GNSS
  • Electrical System
    • 360° lighting
  • Engine
    • -18°C (-0°F) cold start capability
    • -25°C (-13°F) cold start capability
  • Hydraulic System
    • Boom and stick lowering check valves
  • Safety And Security
    • 360° visibility
    • Swing alarm
    • Inspection lighting
  • Service And Maintenance
    • Integrated vehicle health management
  • Undercarriage And Structures
    • 600 mm (24 in) triple grouser shoes
    • 600 mm (24 in) rubber track shoes
    • 700 mm (28 in) triple grouser shoes
    • 3.05 mt (6,720 lb) counterweight
    • 3.57 mt (7,870 lb) counterweight
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader