| Bore | 5.39in |
|---|---|
| Displacement | 928in³ |
| Engine Model | Cat® C15 |
| Engine Power - Stage V Engine - ISO 14396:2002 | 449hp |
| Engine Power - Tier 2/Stage II Engine - ISO 14396:2002 | 447hp |
| Note (1) | Power ratings apply at a rated speed of 1,600 rpm for Tier 2/Stage II model engine when tested under the reference conditions for the specified standard. |
| Note (2) | Power ratings apply at a rated speed of 1,600 rpm for Stage V model engine when tested under the reference conditions for the specified standard. |
| Note (3) | All rating conditions are based on ISO/TR 14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications |
| Note (4) | Minimal engine derating* required up to 2926 m (9,600 ft) at rated speed for Stage V engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent engines. |
| Note (5) | Optional DPF (Diesel Particulate Filter) Package available. |
| Note (6) | * <5% |
| Stroke | 6.77in |
| Breakout Force - Lift (ISO) | 71500lb |
|---|---|
| Breakout Force - Tilt (ISO) | 92500lb |
| Gross Machine Mass | 172157lb |
| Nominal Payload Capacity | 40785lb |
| Shipping Weight | 131988lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | 82889lb |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | 95407lb |
| Bucket Capacities | 7.4-9.8 m³ (9.7-12.8 yd³) |
|---|---|
| Dump Bucket - 1 - Standard Bucket | 9.7yd³ |
| Dump Bucket - 2 | 11.2yd³ |
| Dump Bucket - 3 | 12yd³ |
| Dump Bucket - 4 | 12.8yd³ |
| Note | * Calculated Weight. |
|---|---|
| Operating Mass + Rated Payload* | 163100lb |
| Operating Mass + Rated Payload* - Front Axle | 120100lb |
| Operating Mass + Rated Payload* - Rear Axle | 43000lb |
| Operating Mass* | 122300lb |
| Operating Mass* - Front Axle | 54400lb |
| Operating Mass* - Rear Axle | 67900lb |
| Forward - 1st (virtual) | 3.6mile/h |
|---|---|
| Forward - 2nd (virtual) | 5.9mile/h |
| Forward - 3rd (virtual) | 10.6mile/h |
| Forward - 4th (virtual) | 15.3mile/h |
| Forward - 5th (virtual) | 20.8mile/h |
| Reverse - 1st (virtual) | 3.7mile/h |
| Reverse - 2nd (virtual) | 6.3mile/h |
| Reverse - 3rd (virtual) | 11.2mile/h |
| Reverse - 4th (virtual) | 16.2mile/h |
| Reverse - 5th (virtual) | 20.4mile/h |
| Transmission Type | Cat switched reluctance electric drive |
| Lift Cylinder - Bore | 7.48in |
|---|---|
| Lift Cylinder - Stroke | 39.8in |
| Lift/Tilt System - Circuit | Electro Hydraulic Controls |
| Lift/Tilt System - Pump | Variable Displacement Piston |
| Maximum Flow | 264gpm |
| Relief Valve Setting - Main | 4597psi |
| Tilt Cylinder - Bore | 10.63in |
| Tilt Cylinder - Stroke | 18.03in |
| Dump | 2.8s |
|---|---|
| Lower, Empty, Float Down | 3.5s |
| Raise | 9s |
| Total Cycle Time | 15.3s |
| Articulation Angle | 42.5° |
|---|---|
| Axle Oscillation | 8° |
| Inner Clearance Radius** | 134in |
| Note | ** Clearance dimensions are for reference only. |
| Outside Clearance Radius** | 286in |
| Tire Size | 29.5 R29 |
|---|
| Cooling System (Drive Motor - secondary) | 8.5gal (US) |
|---|---|
| Cooling System (Engine Radiator) | 25.1gal (US) |
| DEF Tank | 9gal (US) |
| Engine Crankcase | 13.7gal (US) |
| Front Differential and Final Drives - With Axle Oil Cooling System | 37gal (US) |
| Fuel Tank | 174.4gal (US) |
| Hydraulic Tank | 89.3gal (US) |
| Propulsion Motor/Drop Box Oil | 18gal (US) |
| Rear Differential and Final Drives - With Axle Oil Cooling System | 40.7gal (US) |
| Standards | ISO 3471:2008 ROPS; ISO 3449:2005 FOPS |
|---|
