725 Articulated Truck

Bore	5.12in
Displacement	763in³
Engine Model	Cat® C13B
Engine Power (ISO 14396)	347hp
Gross Power (SAE J1995)	352hp
Net Power (SAE J1349)	345hp
No Engine De-rating Below	12500ft
Note (1)	Advertised power is tested at 1,700 rpm.
Note (2)	Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (3)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Note (4)	Net power when the fan is at maximum speed is 257 kW (345 hp) per the SAE reference conditions.
Note (5)	Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards.
Note (6)	Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (SAE J1995)	1431lbf·ft
Peak Engine Torque Net (SAE J1349)	1263lbf·ft
Peak Engine Torque Speed	1200r/min
Stroke	6.18in

Rated Payload	26.5ton (US)

Heaped (SAE 2:1)	19.6yd³
Struck	15yd³
Tailgate Heaped SAE 2:1	20.8yd³
Tailgate Struck	15.7yd³

Forward - 1	5mile/h
Forward - 2	9mile/h
Forward - 3	14mile/h
Forward - 4	21mile/h
Forward - 5	29mile/h
Forward - 6	34mile/h
Reverse - 1	6mile/h

Note (1)	The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f
Note (2)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Center Axle - Empty	10009lb
Center Axle - Loaded	33682lb
Center Axle - Rated Load	23673lb
Front Axle - Empty	31438lb
Front Axle - Loaded	37002lb
Front Axle - Rated Load	5564lb
Rear Axle - Empty	9502lb
Rear Axle - Loaded	33175lb
Rear Axle - Rated Load	23673lb
Total - Empty	50949lb
Total - Loaded	103860lb
Total - Rated Load	52911lb

Type	High strength Brinell HB450 wear resistant steel

Base Plate	0.51in
Front Plate	0.28in
Scow	0.51in
Side Plates	0.43in

Cooling System	21.9gal (US)
DEF Tank	9gal (US)
Engine Crankcase	11.4gal (US)
Final Drive - Each	33gal (US)
Fuel Tank	105.7gal (US)
Output Transfer Gear Box	6.6gal (US)
Steering/Hoist Hydraulic System	32.5gal (US)
Transmission	12.4gal (US)

Lower Time	8s
Raise Time	12s

Brakes	ISO 3450 – 2011
Cab - FOPS	ISO 3449 - 2005 Level II
Cab - ROPS	ISO 3471 – 2008
Steering	ISO 5010 – 2019

Note	Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Aisle Width	210in
Turning Dimensions - Clearance Radius	318in
Turning Dimensions - Inside Radius	153in
Turning Dimensions - SAE Turning Radius	294in
Turning Dimensions - Steer Angle - Left/Right	45°

Lock to Lock	4.75 seconds @ 60 rpm

Hydraulic Excavators: 336 - Passes	6-May
Hydraulic Excavators: 350/352 - Passes	5-Apr
Note	An optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased pr
Wheel Loader: 950 - Passes	5
Wheel Loader: 962 - Passes	5-Apr
Wheel Loaders: 966/966 XE - Passes	4
Wheel Loaders: 972/972 XE - Passes	4-Mar

Standard Equipment:

Standard and optional equipment may vary. Consult your Cat dealer for details.

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt
Windshield wiper and washer, two speed, intermittent (front)
Touchscreen display incorporating the rearview camera video feed
Retractable belt: Operator seat and second seat
Sun visor
Mirrors: exterior
Adjustable air vents
Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp
Tilt and telescopic steering wheel
Combined gear selection and hoist control lever
Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted
Air conditioning
Secondary steering – electro hydraulic
Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Secondary steering energy source engaged
– Hour meter
– Retarder active
Heater and defroster with four-speed fan
Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook
Windows opening both sides, tinted

Cat^® Detect with Stability Assist
Product Link Cellular PLE643

Electrical system: 24-volt, 5A 24- to 12-volt converter
Main disconnect switch
Batteries (two) maintenance free
Horn
Remote starting receptacle (cables not included)
Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators

Three axle, six-wheel drive
Dual circuit oil immersed, enclosed brakes – all wheels
Retarder: engine compression brake
Cat C13B engine
Clean Emission Module (CEM) and exhaust aftertreatment package
Auto shift six-speed forward and single speed reverse transmission
Differentials: standard with automatic clutched inter- and cross-axle differential locks

Reverse alarm
Rearview camera
Rollover protective structure/falling objects protective structure (ROPS/FOPS) cab

Radiator
Crankcase
Rear window
Front dump body spill guard, integral part of fabricated body

S·O·S sampling valves
Mud flaps: wheel arch and body mounted with transportation tiebacks
Vandalism protection: lockable caps
Tires, six 23.5R25
Sound suppression (standard in some countries*)
–*Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzertland, Türkiye and UK.

Optional Equipment:

Standard and optional equipment may vary. Consult your Cat dealer for details.

Infrared glass – high ambient cab
Mirrors, heated motorized
Radio, Bluetooth^® stereo system
Seat, heated/cooled
Seat belt, four-point
Window blinds
Windshield wiper and washer, single-speed (rear)

Operator Coaching
Cat^® Payload monitoring system
Product Link Dual PLE683

Cold weather start attachment (2 additional batteries)
Engine block heater
Ether start
Flashing LED beacon
Roof mounted LED work lights

Auto lube installation for automatic greasing of bearings
Fuel additive – anti-waxing
Bare chassis (no body) standard wheel base
Cold weather coolant –51° C (–60° F)
Scissor tailgate
Wheel chocks
Fast fuel fill
Body liners
Exhaust heated body

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

review us on

Tom Corona

21:51 06 May 26

Rich Stidd

22:10 02 May 26

Carlos Virgilio Sauceda Rivera

20:55 23 Mar 26

John Karpathian

16:21 24 Jan 26

Clean store and great employees

Hunter Flaugher

12:56 06 Aug 25

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

16:45 12 Feb 25

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

21:04 05 Dec 24

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.