CB2.5 GC Utility Compactor

Maximum Operating Weight with ROPS	2607lb
Maximum Weight at Front Drum	2607lb
Maximum Weight at Rear Drum	2939lb
Standard Operating Weight with ROPS	5546lb

Compaction Width	39.4in
Drum Diameter	28.3in
Drum Width	39.4in
Height - ROPS	102.2in
Overall Length	102.2in
Overall Width	43.8in
Wheel Base	70.9in

Engine Model	C1.7T
Engine Power (1)	24.7hp

Curb Clearance	17.8in
Drum Offset	2in
Ground Clearance	11.2in
Static Linear Load	66.2lb/in
Travel Speed - Maximum	5.8mile/h
Turning Radius - Inside Drum Edge	103.9in
Turning Radius - Outside Drum Edge	143.3in

Centrifugal Force - Maximum	5885.3lb
Frequency	62Hz
Nominal Amplitude - High	0.02in

Fuel Tank Capacity	14.37gal (US)
Water Spray Tank Capacity	52.8gal (US)

Standard Equipment:

Adjustable Suspension Seat with Operator Presense Switch
ROPS Folding
Seat Belt - 75 mm (3 in) high visibility orange
Operator Console w/ Water Tank Gauge, Emergency Stop, and Glove Box
12-volt Power Outlet
Horn, Backup Alarm

Folding Scrapers
Vibe Selection - front, rear, or both
Pressurized, Triple-Filtration Spray System with Test Mode

Auto Engine Off and Auto Warmup
Air Cleaner, Dual Element
Engine Belt Guard

Telematics

LED Working Lights

Vandal Protection - lockable hood, fuel fill, and controls cover
Machine Life and Tiedowns
Offsets Hitch

Optional Equipment:

ROPS Fixed
Sun Canopy
Seat - Side Shift
Dual Propel Levers

Fixed Scrapers
Cocoa Mats
Edge Cutter Ready
Water Sprayer Antifreeze Kit
Ballast Kit - 200 kg (440 lb)
Ballast Kit - 400 kg (880 lb)

Traction Control

Remote Flash / Troubleshoot
CMV - Compaction Measurement Value

Battery Disconnect
LED Roading Lights
Rotating Amber Beacon

Biodegradeable Hydraulic Oil
Bumpers
Single Point Lift
Custom Paint

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

review us on

Tom Corona

21:51 06 May 26

Rich Stidd

22:10 02 May 26

Carlos Virgilio Sauceda Rivera

20:55 23 Mar 26

John Karpathian

16:21 24 Jan 26

Clean store and great employees

Hunter Flaugher

12:56 06 Aug 25

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

16:45 12 Feb 25

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

21:04 05 Dec 24

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.