Cat® C7.1 Diesel Engine

Back to Home

The Cat® C7.1 Industrial Diesel Engine is offered in ratings ranging from 116-205 bkW (156.2 bhp-275 bhp) @2200 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. Industries and applications powered by C7.1 ACERT engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers and Underground Mining Equipment.

Request a quote
Maximum Power 275HP
Maximum Torque 774lb-ft @ 1400 rpm
Minimum Power 155.6HP
Rated Speed 2200-2500 rpm
Emissions China Nonroad Stage III, Brazil MAR-1, UN ECE R96 Stage IIIA
Height 32.2in
Length 36.6in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 1115lb
Width 26.3in
Aftertreatment -
Aspiration Turbocharged Aftercooled (TA)
Bore 4.1in
Displacement 427.7in³
Engine Configuration In-Line 6, 4-Stroke-Cycle Diesel
Rotation from Flywheel End Counterclockwise
Stroke 5.3in

Standard Equipment:

  • Air Inlet
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments, flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108°C (226°F) as standard to minimize cooling pack size, 50:50 water glycol mix, detailed guidance on cooling system design and validation available to ensure machine reliability
  • Exhaust System
    • Diesel particulate filter and regeneration system supplied, with a range of inlet and outlet options
  • Flywheels And Flywheel Housing
    • Wide choice of drivetrain interfaces, including SAE1, SAE2 or SAE3 configurations
  • Fuel System
    • Electronic high pressure common rail, ACERTTM Technology, innovative filter design to ensure maximum protection of the engine.
  • Lube System
    • Wide choice of sumps for different applications
  • Power Take Off
    • SAE A or SAE B flanges on left-hand side. Right- hand side twin PTO also available. Engine power can also be taken from the front of the engine on some applications, factory fitted compressors are also available.
  • General
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment: