| Biodiesel Capability | Up to B20¹ |
|---|---|
| Displacement | 427in³ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Engine Model | Cat® C7.1 |
| Engine Power - 2,100 rpm ISO 14396:2002 | 269hp |
| Engine Power - 2,100 rpm ISO 14396:2002 | 273 hp (metric) |
| Engine Torque - 1,400 rpm ISO 14396:2002 | 918lbf·ft |
| Gross Power - 2,100 rpm SAE J1995:2014 | 273kW |
| Gross Power - 2,100 rpm SAE J1995:2014 | 277 hp (metric) |
| Gross Torque - 1,400 rpm SAE J1995:2014 | 926lbf·ft |
| Net Power - 2,100 rpm ISO 9249:2007, SAE J1349:2011 | 255 hp (metric) |
| Net Torque - 1,400 rpm ISO 9249:2007, SAE J1349:2011 | 867lbf·ft |
| Note (1) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels**up to: 20% biodiesel FAME (fatty acid methyl ester) ***100% |
| Note | Weight based on a machine configuration with parallel lift Z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, front manual differential/open rear |
|---|---|
| Operating Weight | 44469lb |
| Forward - 1 | 4.3mile/h |
|---|---|
| Forward - 2 | 7.5mile/h |
| Forward - 3 | 12mile/h |
| Forward - 4 | 16mile/h |
| Forward - 5 | 24.5mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Reverse - 1 | 4.3mile/h |
| Reverse - 2 | 7.5mile/h |
| Reverse - 3 | 16mile/h |
| Exterior Sound Power Level - ISO 6395:2008 | 107dB(A) |
|---|---|
| Exterior Sound Power Level - ISO 6395:2008² | 104dB(A) |
| Note (1) | ¹Including countries that adopt the EU and UK Directives. |
| Note (2) | ²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701. |
| Operator Sound Pressure Level - ISO 6396:2008 | 70dB(A) |
| Operator Sound Pressure Level - ISO 6396:2008 ¹ | 69dB(A) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system |
|---|
| Breakout Force | 42489lbf |
|---|---|
| Note (1) | For a machine configuration as defined under “Weight.” |
| Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 27529lb |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 25869lb |
| Cooling System | 14.3gal (US) |
|---|---|
| Crankcase | 5.5gal (US) |
| DEF Tank | 4gal (US) |
| Differential - Final Drives - Front | 11.4gal (US) |
| Differential - Final Drives - Rear | 11.4gal (US) |
| Fuel Tank | 68.6gal (US) |
| Hydraulic Tank | 25.6gal (US) |
| Transmission | 11.4gal (US) |
| Hydraulic Cycle Time - Total | 9.4s |
|---|---|
| Implement System - Maximum Operating Pressure | 4250psi |
| Implement System - Maximum Pump Output at 2,340 rpm | 85gpm |
| Ground Clearance | 1.08ft |
|---|---|
| Height - Top of Hood | 8.75ft |
| Height - Top of ROPS | 11.25ft |
| Hinge Pin Height at Carry Height | 2.17ft |
| Hinge Pin Height at Maximum Lift | 13.83ft |
| Lift Arm Clearance at Maximum Lift | 11.33ft |
| Note | All dimensions are approximate and based on machine equipped with 3.3 m³ (4.3 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Overall Length - Without Bucket | 23.83ft |
| Rack Back - Carry Height | 51° |
| Rack Back - Maximum Lift | 55° |
| Tread Width | 7ft |
| Wheel Base | 10.92ft |
| Width over Tires (Loaded) | 9.33ft |
| Ground Clearance | 1.08ft |
|---|---|
| Height - Top of Hood | 8.75ft |
| Height - Top of ROPS | 11.25ft |
| Hinge Pin Height at Carry Height | 2.5ft |
| Hinge Pin Height at Maximum Lift | 14.75ft |
| Lift Arm Clearance at Maximum Lift | 11.83ft |
| Note | All dimensions are approximate and based on machine equipped with 3.3 m³ (4.3 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Overall Length - Without Bucket | 25.17ft |
| Rack Back - Carry Height | 48° |
| Rack Back - Maximum Lift | 56° |
| Tread Width | 7ft |
| Wheel Base | 10.92ft |
| Width over Tires (Loaded) | 9.33ft |
