| Bore | 5.4in |
|---|---|
| Displacement | 927.9in³ |
| Engine Model | Cat® C15 |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 401hp |
| Engine Power - VR Engine - ISO 14396:2002 | 401hp |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) | No engine derating required up to 591 m (1,938 ft) altitude. |
| Note (4) | Optional Ventilation Reduction Package available. |
| Note (5) | Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. |
| Stroke | 6.8in |
| Breakout Force - SAE | 60298lb |
|---|---|
| Gross Machine Mass | 155095lb |
| Nominal Payload Capacity | 37920lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | 75109lb |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | 88015lb |
| Bucket Capacity | 6.3-8.9 m³ (8.2-11.6 yd³) |
|---|---|
| Dump Bucket - 1 | 8.2yd³ |
| Dump Bucket - 2 | 9.4yd³ |
| Dump Bucket - 3 | 10.9yd³ |
| Dump Bucket - 4 | 11.6yd³ |
| Note | *Calculated Weight. |
|---|---|
| Operating Mass + Rated Payload* | 148611lb |
| Operating Mass + Rated Payload* - Front Axle | 110716lb |
| Operating Mass + Rated Payload* - Rear Axle | 37895lb |
| Operating Mass* | 110692lb |
| Operating Mass* - Front Axle | 50832lb |
| Operating Mass* - Rear Axle | 59860lb |
| Cooling System | 19.8gal (US) |
|---|---|
| Engine Crankcase | 9gal (US) |
| Front Differential and Final Drives | 31.4gal (US) |
| Front Differential and Final Drives - With Axle Oil Cooling System | 42gal (US) |
| Fuel Tank - Dual | 376.4gal (US) |
| Hydraulic Tank | 37gal (US) |
| Rear Differential and Final Drives | 33.5gal (US) |
| Rear Differential and Final Drives - With Axle Oil Cooling System | 44.1gal (US) |
| Transmission | 16.4gal (US) |
| Brakes | ISO 3450, AS2958.1, CAN-CSA424.30-M90 |
|---|---|
| Cab - FOPS | ISO 3449, SAE J231, AS2294.3, EN13627 |
| Cab - ROPS | ISO 3471, SAE J1040, AS2294.2, EN13510 |
| Dump | 3.4s |
|---|---|
| Lower, Empty, Float Down | 3.1s |
| Raise | 9.2s |
| Total Cycle Time | 15.7s |
| Articulation Angle | 42.5° |
|---|---|
| Axle Oscillation | 8° |
| Inner Clearance Radius | 133.2in |
| Outside Clearance Radius | 288.3in |
| Forward - 1 | 3.4mile/h |
|---|---|
| Forward - 2 | 6mile/h |
| Forward - 3 | 10.7mile/h |
| Forward - 4 | 18.5mile/h |
| Reverse - 1 | 4.1mile/h |
| Reverse - 2 | 7.3mile/h |
| Reverse - 3 | 13mile/h |
| Reverse - 4 | 22mile/h |
| Tire Size | 29.5 × 29 |
|---|









