ATC Molded Case Circuit Breaker in NC

Rating Range	30-1000A
Switch Type	Molded Case
Transfer Type	Open transition

Applicable Testing	CSA C22.2 No. 178 certified, IBC 2006, CBC 2007 and OSHPD
Control Power	30-1000A 2, 3, or 4 Pole, 100% Rated
System Voltage Application	120 - 600 Vac, 50/60 Hz
Withstand	100,000 amps withstand/closing/ interrupting at480 Vac

Standard Equipment:

All controls relays and industrial grade relays are totally encapsulated to minimize exposure to dust and dirt. Lugs are 90º rated and all control wire is #16 AWG, type XLPE with a 125º temperature rating.

Durable powder-coated steel NEMA 1, NEMA 3R and NEMA 12 are available with ATC-100 and ATC-300+ controllers. NEMA 4 is only available with the ATC-800 controller. The enclosures are Seismic Qualified (BOCA, CBC, IBC, UBC). The hinges have removable hinge pins to facilitate door removal for easy wall mounting or service and are supplied with pad-lockable latches.

Optional Equipment:

Suitable for service entrance
Load sequencing contacts
Selectable automatic or non-automatic operation
Controller availability: ATC-100, ATC-300+,and ATC-800
Field selectable, multi ratio, control voltage transformer 50/60 Hz
Surge suppression
Multi-meter options available
Integral overcurrent protection
Space heaters
Remote communications
Communications for the ATC-300+ Controller via RS-232 or Modbus through an integrated RS-485 port
2- or 4-position test switch

Pre-transfer signal with 1 N.O. and 1 N.C. contacts
Time delay neutral

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

review us on

Tom Corona

1 month ago

Rich Stidd

1 month ago

Carlos Virgilio Sauceda Rivera

3 months ago

John Karpathian

5 months ago

Clean store and great employees

Hunter Flaugher

10 months ago

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

1 year ago

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

2 years ago

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.