PM310 Track Undercarriage Cold Planer

Maximum Milling Depth	13in
Milling Width	39.4in
Number of Bits	91
Rotor Speeds	97 / 109 / 121 rpm

Engine	C9.3B
Maximum Milling Speed	108ft/min
Maximum Travel Speed	3.4mile/h
Rated Power	343hp

Operating Weight	46770lb
Transport Weight	45869lb

Conveyor Swing	±60 degrees from center
Height - Canopy	12.3ft
Maximum Truck Clearance	15.42ft
Minimum Left Cutting Radius	13.58ft
Minimum Right Cutting Radius	6.3ft
Operating Length - Conveyor Up	36.45ft
Operating Width	8.33ft
Transport Height	9.84ft
Transport Length	30.58ft
Transport Width	8.33lb/in

Cooling System	16.9gal (US)
Diesel Exhaust Fluid (DEF) Tank	12.4gal (US)
Engine Oil	7.9gal (US)
Fuel Tank	137.9gal (US)
Hydraulic Tank	14.5gal (US)
Water Spray System Tank	332.9gal (US)

Standard Equipment:

Features, standard and optional equipment may vary by region. Please check with your local Cat dealer for specific offerings and availability in your area.

Sliding operator station
Suspension seat
Ergonomically-adjustable arm rest
Ground control keypad
High-resolution LCD touchscreen display
12-Volt power receptacle

Remote Flash
Remote Troubleshoot
Cat Grade and Slope
VisionLink^® telematics

Engine Idle Speed Management
High capacity cooling system
Automatic Load Control

Traction Control

Automatic plunge-cut
Automatic grade and slope transition feature
Obstacle jump
Three cutting speeds

Scheduled Oil Sampling (S·O·S℠) Ports
Platform-level engine oil dipsticks
Rotor chamber water spray system
1260 L (332.9 gal) onboard water tank
Side water fill valve
Water tank fill pump

Platform handrails
Signaling/warning horn

Optional Equipment:

Features, standard and optional equipment may vary by region. Please check with your local Cat dealer for specific offerings and availability in your area.

Additional high-resolution LCD touchscreen display
Powered canopy
Windscreen
Exhaust diverter

Sonic grade control sensors
High-resolution LCD touchscreen display (for ground level grade controls)

Dust extraction system
Hydraulically folding conveyor
Mechanically folding conveyor
Additional spray bars (dust control)

CE certificate

Cat Bio HYDO^™ Advanced biodegradable hydraulic oil
High ambient hydraulic oil

Powered rotor turning device (with pendant control)
System K Rotor - Coarse (18 mm)
System K Rotor - Standard (15 mm)
System K Rotor - Fine (8 mm)
Cat Diamond bits
Pneumatic bit removal tool
Tool holder extractor
510 kg (1124 lb) ballast kit

Air compressor
Accessory drive system
High pressure washdown
Low pressure washdown
Additional water spray system (dust control)

Halogen work lighting
Wide dispersion LED work lighting
Warning beacon (fixed)
LED roading lights
Truck signal lights
Remote cameras (rear back up, front conveyor, left and/or right cutting edges, magnetic mount)

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

review us on

Tom Corona

21:51 06 May 26

Rich Stidd

22:10 02 May 26

Carlos Virgilio Sauceda Rivera

20:55 23 Mar 26

John Karpathian

16:21 24 Jan 26

Clean store and great employees

Hunter Flaugher

12:56 06 Aug 25

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

16:45 12 Feb 25

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

21:04 05 Dec 24

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.