65XP - TOWABLE | gregorypoole

Videos
Photos

The Bandit Model 65XP is an entry level disc-style chipper capable of chipping material up to 6″ in diameter. A great all around unit for rental and landscape companies looking for an economical easy to tow unit. Weighing approximately 2,000 pounds this machine can easily be maneuvered in tight areas. Kohler or Briggs gas engine options are available ranging from 25 to 37 horsepower.

The feed system consists of a single pivoting top feed wheel driven via a 24.95 CID hydraulic motor. Down pressure springs are featured on each side of the feed wheel providing over 550 pounds of down pressure allowing the 65XP to easily pull and compress material into the chipper. A wide profile infeed hopper futher enhances the machines ability to process limby material and small trees.

The 65XP rides on a 2,200 pound axle, an optional 3,500 pound axle with 14″ tires is also available. The optional auto feed is recommended to regulate the feed system in lieu of having to stay by the machine and use the control bar.

Pricing: Contact for Pricing Why we quote: Cat® machines are often configured to your job (attachments, hydraulics, cab options) and freight/taxes can vary by location. Request a quote to get accurate pricing based on your exact setup—typically within 1–2 business days.

Request a quote

Payment Calculator Shop Parts Competitive Comparison

Capacity	6 in
Capacity Metric	15.24 cm
Opening Standard	6 in x 12
Opening Metric	15.24 cm x 30.48 cm
Width Standard	67 in
Width Metric	170.18 cm
Height Standard	90 in
Height Metric	228.60 cm
Length Standard	156 in
Length Metric	386.08 cm
Weight Standard	2000 lbs
Weight Metric	907.19 kg
Feed Rate	80 ft/min
Feed Rate Metric	24.38 m/min
Fuel Tank Standard	7 gl
Fuel Tank Metric	26.49 l
Hydrolic Tank Standard	7 gl
Hydrolic Tank Metric	26.49 l

Standard Equipment:

25 or 37 HP Kohler or Briggs 35 HP gas engine options
26" diameter x 3/4 thick chipper disc with two knives
(1) pivoting single feed wheel 10 5/8" diameter x 11 1/2" wide
29" high x 42" wide infeed with folding tray
Single 2,200 pound axle with (2) 20.5 x 8 x10 tires
360 degree manual dicharge chute with end chip deflector
Optional auto feed
Optional engine top cover
Optional 3,500 pound axle with 14" tires

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

review us on

Tom Corona

1 month ago

Rich Stidd

1 month ago

Carlos Virgilio Sauceda Rivera

3 months ago

John Karpathian

5 months ago

Clean store and great employees

Hunter Flaugher

10 months ago

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

1 year ago

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

2 years ago

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.