| Bore | 5.7in |
|---|---|
| Displacement | 1959in³ |
| Emissions | U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent |
| Engine Model | Cat C32B |
| Gross Power - SAE J1995 | 1039hp |
| Net Power - EEC 80/1269 | 974hp |
| Net Power - ISO 14396 | 1024hp |
| Net Power - ISO 9249 | 974hp |
| Net Power - SAE J1349 | 964hp |
| Note | Standard ambient cooling. |
| Peak Torque - 1,250 rpm | 4034lb/ft |
| Rated Speed | 1800r/min |
| Stroke | 6.4in |
| Torque Rise | 33% |
| Articulation Angle | 43° |
|---|---|
| Bucket Range | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Cat Truck Match - High Lift | 777, 785 |
| Cat Truck Match - Standard Lift | 777 |
| Note | *High lift, 50/65-51 (364-6315) tires, standard cooling, 13.8 m3 (18 yd3 ) bucket (496-9912). |
| Operating Weight - Tier 2 Equivalent* | 294687lb |
| Operating Weight - Tier 4 Final* | 294687lb |
| Rated Payload - High Lift | 27.5t |
| Rated Payload - Standard Lift | 30t |
| Bore | 5.7in |
|---|---|
| Displacement | 1959in³ |
| Emissions | U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent |
| Engine Model | Cat C32B |
| Gross Power - SAE J1995 | 1029hp |
| Net Power - EEC 80/1269 | 960hp |
| Net Power - ISO 14396 | 1015hp |
| Net Power - ISO 9249 | 960hp |
| Net Power - SAE J1349 | 952hp |
| Note | Standard ambient cooling. |
| Peak Torque - 1,250 rpm | 4034ft-lb |
| Rated Speed | 1800r/min |
| Stroke | 6.4in |
| Torque Rise | 33% |
| Direct Drive - Forward 1 | Lock-up disabled |
|---|---|
| Direct Drive - Forward 2 | 8mile/h |
| Direct Drive - Forward 3 | 14.1mile/h |
| Direct Drive - Reverse 1 | 4.9mile/h |
| Direct Drive - Reverse 2 | 8.8mile/h |
| Direct Drive - Reverse 3 | 15.6mile/h |
| Forward - 1 | 4.2mile/h |
| Forward - 2 | 7.4mile/h |
| Forward - 3 | 12.7mile/h |
| Note | 50/65-51 (364-6315) calculated speeds. |
| Reverse - 1 | 4.7mile/h |
| Reverse - 2 | 8.1mile/h |
| Reverse - 3 | 13.9mile/h |
| Transmission Type | Cat Planetary Power Shift |
| Cylinders - Lift/Tilt | Double-acting |
|---|---|
| Lift Cylinder - Bore | 10.5in |
| Lift Cylinder - Stroke | 66.2in |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift/Tilt System - Pump | Variable Piston |
| Maximum Flow at 1,650 rpm | 311gal/min |
| Note | High Lift configuration. |
| Relief Valve Setting - Lift/Tilt | 4200psi |
| Tilt Cylinder - Bore | 9.3in |
| Tilt Cylinder - Stroke | 40.9in |
| Dump | 1.8s |
|---|---|
| Lower | 3.8s |
| Lower Float Down | 3.1s |
| Note | High Lift configuration, calculated speeds. |
| Rack Back | 2.4s |
| Raise | 9.2s |
| Total Hydraulic Cycle Time | 17.2s |
