| Bore | 5.4in |
|---|---|
| Displacement | 927.6in³ |
| Engine Model | Cat® C15 |
| Engine Power - ISO 14396:2002 | 426hp |
| Gross Power - SAE J1995:2014 | 434hp |
| High Idle Speed | 2300r/min |
| Low Idle Speed | 800r/min |
| Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA) | 9098ft |
| Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V) | 9298ft |
| Net Power - ISO 9249:2007 | 405hp |
| Net Power - SAE J1349:2011 | 405hp |
| Note (1) | Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
| Note (2) | Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA. |
| Peak Net Torque (1,300 rpm) | 1479lbf·ft |
| Rated Speed | 1800r/min |
| Stroke | 6.7in |
| Torque Rise | 33% |
| Blade Capacity Range | 5.1-16.2 m3 (6.6-21.2 yd3) |
|---|---|
| Operating Weight – Straight Blade (Tier 4 Final/Stage V) | 74966lb |
| Forward - 1 | 3.8mile/h |
|---|---|
| Forward - 2 | 6.9mile/h |
| Forward - 3 | 12.2mile/h |
| Forward - 4 | 21.6mile/h |
| Reverse - 1 | 4.3mile/h |
| Reverse - 2 | 7.8mile/h |
| Reverse - 3 | 13.9mile/h |
| Reverse - 4 | 24.7mile/h |
| Transmission Type | Cat planetary - powershift - ECPC |
| Cylinder, Double Acting - Tilt and Tip, Bore and Stroke | 140 mm × 230 mm (5.5 in × 9.1 in) |
|---|---|
| Cylinders, Double Acting - Lift, Bore and Stroke | 120 mm × 1070 mm (4.7 in × 42.1 in) |
| Main Relief Pressure | 3771psi |
| Maximum Supply Pressure | 3495psi |
| Pump Flow at 1,800 rpm | 30.9gpm |
| Bore | 4.5in |
|---|---|
| Max Flow at 1,800 rpm | 44.9gpm |
| Relief Valve Setting - Steering | 3481psi |
| Steering System - Circuit | Pilot operated, load sensing |
| Steering System - Pump | Variable displacement piston |
| Stroke | 22.7in |
| Vehicle Articulation Angle | 86° |
| Cooling System | 30.6gal (US) |
|---|---|
| Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) | 8.5gal (US) |
| Differential - Final Drives - Front | 26.4gal (US) |
| Differential - Final Drives - Rear | 29.1gal (US) |
| Engine Crankcase | 9gal (US) |
| Fuel Tank | 206.6gal (US) |
| Hydraulic System - Implement/Steering | 56.5gal (US) |
| Hydraulic Tank Only | 35.4gal (US) |
| Note (1) | All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative |
| Transmission | 17.4gal (US) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co |
|---|
| Front | Planetary – Fixed |
|---|---|
| Oscillation Angle | ±11° |
| Rear | Planetary – Oscillating |
| Brakes | Multi-disc wet (enclosed) 4 WHL |
|---|---|
| Parking Brake | Drum and shoe, spring applied, hydraulic released |
| Machine Sound Power Level (ISO 6395:2008) | 113dB(A) |
|---|---|
| Machine Sound Power Level (ISO 6395:2008)** | 110dB(A) |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701 |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Operator Sound Pressure Level (ISO 6396:2008) | 73dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
| Machine Sound Power Level (ISO 6395:2008) | 113dB(A) |
|---|---|
| Machine Sound Power Level (ISO 6395:2008)** | 110dB(A) |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701 |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Operator Sound Pressure Level (ISO 6396:2008) | 73dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
| Centerline of Front Axle to Hitch | 6.1ft |
|---|---|
| Centerline of Rear Axle to Edge of Bumper | 9.3ft |
| Ground Clearance | 1.8ft |
| Ground Clearance - Bumper | 2.8ft |
| Ground Clearance to Trunnion | 1.45ft |
| Height - Top of Cab | 13.5ft |
| Height - Top of Exhaust Stack | 14.2ft |
| Height - Top of Hood | 10.5ft |
| Height to Top of Beacon | 14.5ft |
| Length - With Blade on Ground - Straight Blade | 27.6ft |
| Wheel Base | 12.1ft |
| Width Over Guardrails | 10.94ft |
| Capacity | 6.6yd³ |
|---|---|
| Dig Depth | 17.6in |
| Ground Clearance | 41.6in |
| Height | 48.4in |
| Maximum Tilt | 45.9in |
| Turning Radius – Inside Corner of Blade | 10.15ft |
| Turning Radius – Outside Corner of Blade | 23.7ft |
| Width Over End Bits | 177.4in |
| Capacity | 6.6yd³ |
|---|---|
| Dig Depth | 17.6in |
| Ground Clearance | 41.6in |
| Height | 48.4in |
| Maximum Tilt | 45.9in |
| Turning Radius – Inside Corner of Blade | 10.2in³ |
| Turning Radius – Outside Corner of Blade | 23.2ft |
| Width Over End Bits | 177.4in |
| Capacity | 10yd³ |
|---|---|
| Dig Depth | 18.8in |
| Ground Clearance | 42in |
| Height | 61.1in |
| Maximum Tilt | 44.1in |
| Turning Radius – Inside Corner of Blade | 10.8ft |
| Turning Radius – Outside Corner of Blade | 23.8ft |
| Width Over End Bits | 174.1in |
| Capacity | 10yd³ |
|---|---|
| Dig Depth | 18.1in |
| Ground Clearance | 41.4in |
| Height | 53.1in |
| Maximum Tilt | 44.6in |
| Turning Radius – Inside Corner of Blade | 11.3ft |
| Turning Radius – Outside Corner of Blade | 23.9ft |
| Width Over End Bits | 171.3in |
| Capacity | 21.2yd³ |
|---|---|
| Dig Depth | 18.6in |
| Ground Clearance | 42.2in |
| Height | 68.7in |
| Maximum Tilt | 48.9in |
| Turning Radius – Inside Corner of Blade | 11.4ft |
| Turning Radius – Outside Corner of Blade | 24.9ft |
| Width Over End Bits | 189in |
| Capacity | 10.6yd³ |
|---|---|
| Dig Depth | 18.1in |
| Ground Clearance | 41.4in |
| Height | 53.1in |
| Maximum Tilt | 44.6in |
| Turning Radius – Inside Corner of Blade | 11.4ft |
| Turning Radius – Outside Corner of Blade | 23.9ft |
| Width Over End Bits | 171.6in |
