854K Wheel Dozer

Back to Home

Cat Wheel Dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. Engineered for your demanding work in large dozing applications, the 854K Wheel Dozer is the largest in the Cat Wheel Dozer line and is an ideal match for large mining operations, power generating utilities, the general contracting industry and wherever mobility, versatility and compaction is needed.

Request a quote
Bore 5.7in
Displacement 1958in²
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 907HP
Emissions (Tier 2 Equivalent): Net Power ISO - 9249 814HP
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 900HP
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 814HP
Engine Model Cat® C32 ACERT™
Gross Power 907HP
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2) Net torque rise meets SAE J139.
Note (3) No engine derating required up to 3050 m (10,000 ft) altitude.
Peak Torque - 1,200 rpm 3139lb/ft
Rated Speed 1750r/min
Stroke 6.4in
Torque Rise 30%
Operating Weight 224254lb
Converter Drive - Forward 1 4.4mile/h
Converter Drive - Forward 2 7.7mile/h
Converter Drive - Forward 3 13.2mile/h
Converter Drive - Reverse 1 4.8mile/h
Converter Drive - Reverse 2 8.4mile/h
Converter Drive - Reverse 3 14.6mile/h
Direct Drive - Forward 1 Lock-up disabled
Direct Drive - Forward 2 8.1mile/h
Direct Drive - Forward 3 14.2mile/h
Direct Drive - Reverse 1 5mile/h
Direct Drive - Reverse 2 8.9mile/h
Direct Drive - Reverse 3 15.6mile/h
Note Travel speeds based on 45/65-45 L-5 46 ply tires.
Transmission Type Cat Planetary Power Shift
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke 267 mm × 286 mm (0.88 ft × 0.94 ft)
Cylinders, Double Acting - Lift, Bore and Stroke 177 mm × 1760 mm (0.58 ft × 5.8 ft)
Output at 1,850 rpm and 6900 kPa (1,000 psi) 161gal/min
Relief Valve Setting - Lift (Large Pump) 3289psi
Relief Valve Setting - Tilt (Small Pump) 3560psi
Cooling System 53gal (US)
Crankcase 32gal (US)
Differential - Final Drives - Front 98gal (US)
Differential - Final Drives - Rear 90gal (US)
Fuel Tank - Standard 413gal (US)
Hydraulic System - Implement and Brakes - Tank Only 81gal (US)
Hydraulic System - Steering and Engine Cooling Fan - Tank Only 77gal (US)
Transmission 45gal (US)
Front Fixed
Maximum Single-Wheel Rise and Fall 22.6in
Rear Oscillating at ±10 degrees
Brakes Meets ISO 3540:2011
Blade Capacities 25 to 45 m³ (33 to 58 yd³)
Air Conditioning Standard air conditioning system contains environmentally friendly R134a refrigerant
Cab - ROPS/FOPS (1) Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
Cab - ROPS/FOPS (2) SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005
FOPS FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
ROPS ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.
Sound Performance (1) The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
Sound Performance (2) The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
Sound Performance (3) Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Performance (4) The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).
Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi) 124gal/min
Minimum Turning Radius 31ft
Relief Valve Setting 5004psi
Total Steering Angle 86°
Serial Number Prefix KK6
Serial Number Prefix RM6
Centerline of Front Axle to Hitch 9.67ft
Centerline of Rear Axle to Edge of Bumper 13.75ft
Ground Clearance 27in
Height - Top of Exhaust Pipe 17.17ft
Height - Top of Hood 13ft
Height - Top of ROPS 18.25ft
Length - With Blade on Ground 44ft
Wheel Base 19.25ft

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Electrical
    • Alarm, back-up
    • Alternator (150-amp)
    • Batteries, low maintenance
    • Deutsch & Amp Seal terminal connectors
    • ECM diagnostic connector
    • Ground level electrical disconnect
    • Ground level starting receptacle for emergency start
    • Lighting system, halogen (front and rear)
    • Lighting, access stairway
    • Starter, electric (heavy duty)
    • Starting and charging system (24-volt)
  • Operator Environment
    • Advisor display
    • Air conditioner and heater with automatic temperature control
    • Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS) Radio ready for (entertainment) includes antenna, speakers, and 1 × 12V converters (24-volt, 10 amp) for use with laptop/cell phone
    • Cigar lighter and ashtray
    • Coat hook
    • Electro-hydraulic tilt and lift control system locks
    • Heater and defroster
    • Horn, electric
    • Implement and steering lockouts
    • VIMS 3G monitoring system:
      – Action alert system, three category
      – Instrumentation, gauges:
         · Engine Coolant Temperature
         · Fuel Level
         · Hydraulic Oil Temperature
         · Tachometer
         · Transmission Gear Indicator
         · Transmission Oil Temperature
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat belt, retractable, 76 mm (3 in) wide operator and trainer seats
    • Seat, Cat Comfort (cloth) air suspension
    • STIC control system
    • Tinted glass
    • Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
  • Power Train
    • Air-to-Air After cooler (ATAAC)
    • Auto Idle Kickdown
    • Axle oil coolers (front and rear)
    • Brakes, fully hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
    • Case drain filters
    • Delayed Engine Shutdown
    • Demand fan
    • Electric fuel priming pump
    • Engine, Cat C32 ACERT
    • Ground level engine shutdown
    • Ground level fast fill fuel
    • Ground level transmission lockout
    • Ground level starter lockout
    • Idle Engine Shutdown
    • Precleaner, engine air intake
    • Next Generation Modular Radiator (NGMR)
    • Starting aid (ether), automatic
    • Throttle lock
    • Transmission, 533 mm (21 in) planetary, powershift with 3F/3R, electronic control
    • Venturi Exhaust Stacks
  • Other Standard Equipment
    • Autolube
    • Automatic bucket lift/tilt kickouts, electronically adjustable from cab
    • Bumper service center
    • Couplings, Cat O-ring face seals
    • Doors, service access (locking)
    • Emergency platform egress
    • Fenders, steel (front and rear)
    • Grouped hydraulic pressure ports
    • Guards, power train and crankcase
    • Hitch, drawbar with pin
    • Hoses, Cat XT and XT-ES
    • Hydraulic oil cooler
    • Impeller clutch
    • Implement and steering ecology drains
    • Mufflers, under hood
    • Oil sampling valves
    • Piston pump case drain filters
    • Electro-hydraulic blade controls
    • Product Link
    • Service center with ground level electrical and fluids service center
    • Sight gauges:
      – Coolant level
      – Implement oil level
      – Steering oil level
      – Transmission oil level
    • Starter lockout, bumper
    • Stairway, left and right rear access
    • Steering, load sensing
    • Toe kicks
    • Transmission lockout, bumper
    • Vandalism protection caplocks
    • Windshield cleaning platforms
    • Venturi Stack
  • Tires, Rims, And Wheels
    • A tire must be selected from the mandatory attachments section. Base machine price includes a tire allowance.
  • Antifreeze
    • Premixed 50 percent concentration of extended life coolant with freeze protection to –34° C (–29° F)

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Blades
    • Semi-U – 25.4 m³ (33.1 yd³)
    • HD Semi-U – 25.4 m³ (33.1 yd³)
    • Coal – 44.7 m³ (58.2 yd³)
  • Electrical
    • 10A converter
    • HID lights
    • Object Detection
    • Rear vision camera
    • LED strobe warning beacons
  • Operator Environment
    • AM/FM/CD/MP3 radio
    • Cab precleaner
    • Sirius/USB/Bluetooth Radio
    • Sun Screen
  • Starting Aids
    • Engine coolant 120V heater
    • Engine coolant 240V heater
  • Machine Control And Guidance
    • CAES attachment ready option
  • Miscellaneous Attachments
    • Arctic Antifreeze for protection to –50° C (–58° F)
    • Diagnostic lines
    • Roading fenders
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader