New AP1000F Wheel Paver in North Carolina

Back to Home

The AP1000F is a high-production wheel paver that excels on airports runways, interstates, highways, and other large jobsites. Its high travel speed, optional front wheel assist, and all-wheel drive features deliver superb mobility.

Pricing: Contact for Pricing

Request a quote
Engine Model Cat C7.1 with ACERT
Gross Power 225HP
Hopper Capacity - Low Entry Hopper 286ft³
Hopper Capacity - Standard Entry 267ft³
Inside Turn Radius 1.5ft
Maximum Paving Speed - With Tamper Bar Screed 82ft/min
Maximum Paving Speed - With Vibratory Screed 250ft/min
Maximum Paving Width - SE60 V Screed 25ft
Maximum Paving Width - SE60 V XW, VT XW Screed 25ft
Maximum Throughput Capacity 1766tonnes/hr
Maximum Travel Speed 12mile/h
Standard Paving Range 3 - 6 m (9' 10" - 19' 6")
Operating Weight - With SE60 V 41985lb
Operating Weight - With SE60 V XW 43472lb
Operating Weight - With SE60 VT XW 45419lb
Tractor Operating Weight 34820lb
Tractor Shipping Weight 34228lb
Operating Height - With Canopy 157in
Operating Height - Without Canopy 146in
Operating Length - With SE60 V Screed 22.5ft
Operating Length - With SE60 V XW Screed 23.1ft
Operating Width - Low Entry Hopper 142in
Operating Width - Standard Entry Hopper 132in
Transport Height - Canopy Retracted 10.1ft
Transport Height - Without Canopy 9.83ft
Transport Length - With SE60 V Screed 22.1ft
Transport Length - With SE60 XW-Series 22.6ft
Transport Width - With End Gates Folded 9.83ft
Transport Width - With Screed End Gates 10.66ft
Truck Entry Height - With Low Entry Hopper 21in
Truck Entry Height - With Standard Entry Hopper 22.5in
DEF Tank 5gal (US)
Fuel Tank Capacity 92gal (US)
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.