New AP600 Wheel Paver in North Carolina

Back to Home

The AP600 is a mid to high production wheel paver that offers versatility for highways, rural roads, streets and other mid-sized projects. It can be equipped with either a front-mount extender screed or a rear-mount extender screed.

Pricing: Contact for Pricing

Request a quote
Operating Length 21.75ft
Operating Width 10.8ft
Overall Height 12.5ft
Paving Range with SE47 FM 2.44 m - 6.2 m (8' - 20' 6")
Paving Range with SE50 V 2.55 m - 6.5 m (8' 4" - 21' 4")
Paving Range with SE60 FM 3.0 m - 7.8 m (10' - 25' 6")
Paving Range with SE60 V 3.0 m - 7.5 m (9' 10" - 24' 6")
Transport Height 9.9ft
Transport Length 20.9ft
Transport Width 9.8ft
Operating weight with SE47 FM 36716lb
Operating weight with SE50 V 37754lb
Operating weight with SE60 FM 38316lb
Operating weight with SE60 V 38056lb
Shipping Weight - Paver Only 29391lb
Inside Turn Radius 4.5ft
Maximum Paving Speed 250ft/min
Maximum Throughput Capacity 1433ton(US)/h
Maximum Travel Speed 10mile/h
Cooling System - Total 8gal (US)
DEF Tank 5gal (US)
Fuel Tank Capacity 73gal (US)
Hydraulic Oil Tank 58gal (US)
Washdown Spray Tank 7.9gal (US)
Engine Model Cat C4.4
Gross Power 173HP

Standard Equipment:

  • Operating Environment
    • Dual operating stations
    • Steering guide
    • Ventilation System
  • Technology
    • Product Link Elite 641_cellular
  • Powertrain
    • Automatic engine speed control
    • Cat C4.4 Engine
    • Variable speed cooling fan
    • Eco-mode
    • Extended life hydraulic oil
  • Electrical System
    • 1000 CCA batteries
    • 100 amp alternator
    • 12-volt power receptacle
    • Cat Electronic Technician
    • Automotive type fuse system
    • 70 kW generator
    • Machine security system
  • Material Delivery
    • Contact-type material feed sensors
    • Adjustable push-roller
  • Service And Maintenance
    • Extended-life coolant
    • Engine coolant heater
    • Remote access drains
    • Scheduled Oil sampling ports
    • Sight gauges
  • Safety
    • Back-up alarm
    • Horn
    • Working lights
    • Mirror package
    • Vandal covers

Optional Equipment:

  • Operating Environment
    • Air-ride seat
    • Hard top canopy
    • Deceleration pedal
    • Heated seats
    • Side shields
    • Towpoint indicator (2nd)
    • Umbrella
    • Screen visor
    • Windshield
    • Windshield
  • Technology
    • Cat Grade Control
    • Hopper level and material height sensor
    • Pave start assistant
    • Product Link Elite 631_satellite
    • Thermal mapping
  • Powertrain
    • All wheel drive
    • Ballast_front weights
    • Front wheel assist
    • Radial drive tires
    • Sand rib drive tires
  • Electrical System
    • Auxiliary power panel_6.6 kW
  • Material Delivery
    • Auger extension
    • Leveling devices
    • Mainframe extensions_manual
    • Mainframe extensions_power
    • Sonic feed sensors
    • Power folding front apron
    • Truck hitch
    • Washdown pump and reel
    • Washdown tank
    • Wide width paving packages
  • Service And Maintenance
    • Uptime kits
    • Service repair kits
  • Grade References
    • Sonic Averaging Beam
    • Rigid Ski, 9.15 m (30') and 12.2 m (40')
  • Screed Choices
    • SE47 FM Screed
    • SE50 V Screed
    • SE60 V Screed
    • SE60 FM Screed

Coming Soon

Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader