| Bore | 5.1in |
|---|---|
| Displacement | 736in³ |
| Emissions | The 735 meets Tier 4 Final and Stage V emission standards. |
| Engine Model | Cat® C13 |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage V | Cat C13 |
| Gross Power - SAE J1995 | 434HP |
| Net Power - ISO 14396 | 429HP |
| Net Power - SAE J1349 | 424HP |
| No Engine De-rating Below | 12500ft |
| Note (1) | The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. |
| Note (2) | The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
| Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (4) | Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. |
| Note (5) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio |
| Peak Engine Torque Gross (SAE J1995) | 1614ft·lbf |
| Peak Engine Torque Net (SAE J1349) | 1597ft·lbf |
| Peak Engine Torque Speed | 1200r/min |
| Stroke | 6.2in |
| Rated Payload | 35.3ton (US) |
|---|
| Heaped (SAE 2:1) | 26.2yd³ |
|---|---|
| Struck | 20.3yd³ |
| Tailgate Heaped SAE 2:1 | 27.9yd³ |
| Tailgate Struck | 21.3yd³ |
| Forward - 1 | 5mile/h |
|---|---|
| Forward - 2 | 9mile/h |
| Forward - 3 | 14mile/h |
| Forward - 4 | 22mile/h |
| Forward - 5 | 30mile/h |
| Forward - 6 | 35mile/h |
| Reverse - 1 | 6mile/h |
| Cooling System | 21.9gal (US) |
|---|---|
| DEF Tank | 5.3gal (US) |
| Engine Crankcase | 10gal (US) |
| Final Drives/Differential | 33gal (US) |
| Fuel Tank | 108.8gal (US) |
| Hydraulic System | 29.1gal (US) |
| Output Transfer Gear Box | 5.5gal (US) |
| Transmission | 12.3gal (US) |
| Interior Cab | 72dB(A) |
|---|---|
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Lower Time | 11s |
|---|---|
| Raise Time | 12s |
| Brakes | ISO 3450 – 2011 |
|---|---|
| Cab - FOPS | ISO 3449 Level II – 2005 |
| Cab - ROPS | ISO 3471 – 2008 |
| Steering | ISO 5010 – 2007 |
| Center Axle - Empty | 11001lb |
|---|---|
| Center Axle - Loaded | 41756lb |
| Center Axle - Rated Load | 30754lb |
| Front Axle - Empty | 34128lb |
| Front Axle - Loaded | 43166lb |
| Front Axle - Rated Load | 9039lb |
| Rear Axle - Empty | 10516lb |
| Rear Axle - Loaded | 41270lb |
| Rear Axle - Rated Load | 30754lb |
| Total - Empty | 55645lb |
| Total - Loaded | 126192lb |
| Total - Rated Load | 70548lb |
| Lock to Lock | 4.75 seconds @ 60 rpm |
|---|
| Type | High strength Brinell HB450 wear resistant steel |
|---|
| Note | Dimensions are for machines equipped with 750/65 R25 tires. |
|---|---|
| Turning Dimensions - Aisle Width | 212in |
| Turning Dimensions - Clearance Radius | 318in |
| Turning Dimensions - Inside Radius | 149in |
| Turning Dimensions - SAE Turning Radius | 294in |
| Turning Dimensions - Steer Angle - Left/Right | 45° |
| Hydraulic Excavators: 336F/336F XE - Passes | 5–6 |
|---|---|
| Hydraulic Excavators: 349F/349F XE - Passes | 4–5 |
| Note | An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased |
| Wheel Loader: 950M - Passes | 5 |
| Wheel Loader: 962M - Passes | 4–5 |
| Wheel Loaders: 966M/966M XE - Passes | 4 |
| Wheel Loaders: 972M/972M XE - Passes | 3–4 |
| Base Plate | 0.51in |
|---|---|
| Front Plate | 0.28in |
| Side Plates | 0.43in |
