730 Bare Chassis Articulated Truck

Long Wheel Base	215.2in
Standard Wheel Base	156.7in

Rated Payload	69997lb

Bore	5.1in
Displacement	763in³
Engine Model	Cat® C13
Gross Power - SAE J1995:2014	375hp
Net Power - SAE J1349:2011	367hp
No Engine De-rating Required Below	12500ft
Peak Engine Torque Gross (SAE J1995)	1579lb/ft
Peak Engine Torque Net (SAE J1349)	1554ft·lbf
Peak Engine Torque Speed	1200r/min
Stroke	6.2in

Forward - 1	5mile/h
Forward - 2	9mile/h
Forward - 3	14mile/h
Forward - 4	21mile/h
Forward - 5	29mile/h
Forward - 6	34mile/h
Reverse - 1	6mile/h

Cooling System	21.9gal (US)
DEF Tank	9gal (US)
Engine Crankcase	11.4gal (US)
Final Drives/Differential	33gal (US)
Fuel Tank	105.7gal (US)
Hydraulic System	32.5gal (US)
Output Transfer Gear Box	6.6gal (US)
Transmission	12.4gal (US)

Interior Cab	70dB(A)

Brakes	ISO 3450:2011
Cab - FOPS	ISO 3449:2005 Level II
Cab - ROPS	ISO 3471:2008
Steering	ISO 5010:2019

Lock to Lock	4.75 seconds @ 60 rpm

Note	Dimensions are for machines equipped with 23.5 R25 tires.
Turning Dimensions - Aisle Width	210in
Turning Dimensions - Clearance Radius	318in
Turning Dimensions - Inside Radius	153in
Turning Dimensions - SAE Turning Radius	294in
Turning Dimensions - Steer Angle - Left/Right	45°

Standard Equipment:

For more information on 730 Bare Chassis options, please contact Caterpillar OEM Solutions at oem_solutions@cat.com.

Standard and optional equipment may vary. Consult your Cat dealer for details.

Adjustable air vents
Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook
Secondary steering – electro hydraulic
Retractable belt: Operator seat and second seat
Windshield wiper and washer, two speed, intermittent (front)
Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp
Heater and defroster with four-speed fan
Sun visor
Windshield wiper and washer, two speed (rear)
Air conditioning
Mirrors: exterior
Windows opening both sides, tinted
Combined gear selection and hoist control lever
Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Machine Security System (MSS) ready
– Secondary steering energy source engaged
– Hour meter
– Retarder active
10-inch touchscreen with Cat rearview camera
Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt
Tilt and telescopic steering wheel
Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Cat Detect with Stability Assist
Push to Start with Operator ID
Product Link Cellular PLE643
VisionLink

Main disconnect switch
Electrical system: 24-volt, 10A 24- to 12-volt converter
Horn
Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators
Batteries (two) maintenance free
Remote starting receptacle (cables not included)
LED Rear Step Lights
Daylight running lights

Auto shift six-speed forward and single speed reverse transmission
Cat Clean Emission Module (CEM) and exhaust aftertreatment package
Three axle, six-wheel drive
Differentials: standard with automatic clutched inter- and cross-axle differential locks
Cat C13A (LRC) or C13B (HRC) engine
Dual circuit oil immersed, enclosed brakes – all wheels
Automatic Retarder: engine compression brake
CX31 transmission

Reverse alarm
Rearview camera
ROPS/FOPS cab
Machine Speed Limiting
Dynamic Rollover Protection

Radiator
Crankcase
Rear window

Sound suppression (standard in some countries)
S·O·S sampling valves
Vandalism protection: lockable caps
Tires, six 23.5R25
Bare chassis (no body) standard wheel base
Mud flaps: wheel arch and body mounted with transportation tiebacks

Optional Equipment:

Standard and optional equipment may vary. Consult your Cat dealer for details.

Infrared glass — high ambient cab
Secondary touchscreen display
Operator seat belt, four-point
Mirrors, heated motorized
Seat, heated/cooled
Single-speed rear wiper

Product Link Dual PLE683
Cat Payload monitoring system
Operator Coaching

Flashing LED beacon
Engine block heater
LED Rear Work Lights
Cold weather start attachment (2 additional batteries)
Ether start
Roof mounted LED work lights

Multi-view camera with object detection

Fuel additive, anti-waxing
Cold weather coolant -51°C (-60°F)
Tires, six 750/65R25, radial
Bare chassis (no body) long wheel base
Wheel chocks
Fast fuel fill
Auto lube installation for automatic greasing of bearings

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

review us on

Tom Corona

21:51 06 May 26

Rich Stidd

22:10 02 May 26

Carlos Virgilio Sauceda Rivera

20:55 23 Mar 26

John Karpathian

16:21 24 Jan 26

Clean store and great employees

Hunter Flaugher

12:56 06 Aug 25

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

16:45 12 Feb 25

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

21:04 05 Dec 24

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.