| Bore | 4.1in |
|---|---|
| Derating Altitude | 9842ft |
| Displacement | 427.8in³ |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Engine Model | Cat 7.1 |
| Engine Power (ISO 14396) | 196hp |
| Engine Power AWD (ISO 14396) | 196hp |
| Engine RPM | 2,200 |
| High - Ambient Capability | 122°F |
| Maximum Torque - ISO 9249 | 616lb/ft |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
| Note (2) | Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) | Power as declared per ISO 14396 |
| Number of Cylinders | 6 |
| Standard Capability | 109°F |
| Stroke | 5.3in |
| Torque Rise - ISO 9294 | 40% |
| Note | *Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
|---|---|
| Operating Weight - Typically Equipped | 38725lb |
| Arc Radius | 16.3in |
|---|---|
| Blade Height | 24in |
| Blade Width | 12ft |
| Cutting Edge Width | 6in |
| End Bit | 6in |
| Throat Clearance | 4.4in |
| Length of Machine* | 406.7in |
|---|---|
| Maximum Height | 132.4in |
| Note | *Typically equipped with push block and ripper. |
| Width | 95.6in |
| Width All Wheel Drive (AWD) | 99.3in |
| Blade Tip Range Backward | 5 |
|---|---|
| Blade Tip Range Forward | 40 |
| Circle Center Shift Left | 29.6in |
| Circle Center Shift Right | 28.7in |
| Maximum Depth of Cut | 28.1in |
| Maximum Lift Above Ground | 18.7in |
| Maximum Shoulder Reach Left | 74.3in |
| Maximum Shoulder Reach Right | 71.3in |
| Moldboard Side Shift Left | 25.6in |
| Moldboard Side Shift Right | 20.7in |
| Circle Drive with Slip Clutch | 2gal (US) |
|---|---|
| Circle Drive without Slip Clutch | 0.5gal (US) |
| Cooling System | 40l |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 4.2gal (US) |
| Engine Crankcase | 5.5gal (US) |
| Fuel Tank | 78gal (US) |
| Hydraulic System | 11.9gal (US) |
| Transmission | 4.8gal (US) |
| All-Wheel Drive Weight (AWD) (Stage V)* | 40543lb |
|---|---|
| All-wheel Drive Weight (AWD) (Tier 4 Final)** | 42119lb |
| Weight (Tier 4 Final)** | 40488lb |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
|---|
