Operating Weight - Typically Equipped | 35067lb |
---|
Arc Radius | 16.3in |
---|---|
Blade Height | 24in |
Blade Width | 12ft |
Cutting Edge | 6in |
End Bit | 6in |
Throat Clearance | 4.1in |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
---|---|
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. |
Blade Tip Range Backward | 5 |
---|---|
Blade Tip Range Forward | 40 |
Circle Center Shift Left | 26in |
Circle Center Shift Right | 26in |
Maximum Depth of Cut | 30.5in |
Maximum Lift Above Ground | 16.1in |
Maximum Shoulder Reach Left | 69.4in |
Maximum Shoulder Reach Right | 76in |
Moldboard Side Shift Left | 20.1in |
Moldboard Side Shift Right | 26.1in |
All-Wheel Drive Net Power Range (Tier 4) | 174kW |
---|---|
Bore | 4.1in |
Derating Altitude | 9842.5ft |
Derating Altitude (AWD) | 5499ft |
Displacement | 427.8in³ |
Emissions | U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA |
Engine Model | Cat 7.1 |
Engine RPM | 2,000 |
Maximum Torque - AWD On | 611lb/ft |
Maximum Torque - ISO 9249 | 606lb/ft |
Net Power Range (Tier 3) | 130hp |
Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." |
Note (2) | Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Note (3) | Power as declared per ISO 14396 |
Number of Cylinders | 6 |
Standard Capability | 122°F |
Stroke | 5.3in |
Torque Rise - ISO 9294 | 42% |
Circle Drive | 1.8gal (US) |
---|---|
Cooling System | 14gal (US) |
Diesel Exhaust Fluid Tank (Tier 4 Only) | 5gal (US) |
Engine Crankcase | 4.8gal (US) |
Fuel Tank | 65gal (US) |
Hydraulic System | 25.6gal (US) |
Transmission and Differential | 9gal (US) |
Basic Blade Width | 12ft |
---|---|
Length of Machine* | 387in |
Maximum Height | 136.4in |
Note | *Typically equipped with push block and ripper. |
Width | 102in |
Width All Wheel Drive (AWD) | 2551mm |
Joystick All-Wheel Drive (AWD) Weight* Tier 4 | 36846lb |
---|---|
Joystick Weight* Tier 4 | 35358lb |
Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 | 36731lb |
Lever/Steering Wheel Weight* Tier 4 | 35067lb |
Note (1) | *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |