302.7D CR Mini Hydraulic Excavator

Back to Home
Displacement 68in³
Emissions Meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Engine Model Yanmar 3TNV76
Gross Power 24.3HP
Net Power 20.7HP
Note Engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Rated Net Power - ISO 9249 20.7HP
Operating Weight 6239lb
Operating Weight - With Cab 6239lb
Operating Weight - With Canopy 6034lb
Boom Swing Angle - Left 75°
Boom Swing Angle - Right 50°
Height 7.9ft
Length - Undercarriage 79in
Maximum Dig Height 4170/4300 mm (13 ft 8 in/14 ft 1 in)
Maximum Digging Depth 2544/2744 mm (8 ft 4 in/9 ft 0 in)
Maximum Dozer Dig Depth 16in
Maximum Dozer Lift Height 15in
Maximum Dumping Height 2840/2970 mm (9 ft 4 in/9 ft 8 in)
Maximum Reach 4613/4805 mm (15 ft 1 in/15 ft 10 in)
Maximum Reach - Ground Level 4481/4681 (14 ft 8 in/15 ft 5 in)
Maximum Vertical Dig Depth 1962/2152 mm (6 ft 5 in/7 ft 1 in)
Minimum Front Linkage Swing Radius 21in
Tail Swing Radius 30in
Track Width 30in
Transport Length - Arm Lowered 14ft
Width 5.15ft
Auxiliary Circuits - Primary 52.2 L/min at 225 bar (13.8 gal/min at 3,263 psi)
Auxiliary Circuits - Secondary 30.8 L/min at 206 bar (8.1 gal/min at 2,988 psi)
Maximum Bucket Force 5058lb
Maximum Stick Force - Standard/Long 15.4 kN/13.6 kN (3,462 lbf/3,057 lbf)
Operating Pressure - Equipment 3263psi
Operating Pressure - Swing 2987psi
Operating Pressure - Travel 3263psi
Pump Flow at 2,500 rpm 23.6gal/min
Dig Depth 16.5in
Height 11.4in
Lift Height 15in
Width 61.9in
Gradeability 30°/58%
Travel Speed 2.1 km/h/3.8 km/h (1.30 mph/2.36 mph)
Fuel Tank Capacity 9.3gal (US)
Hydraulic Tank Capacity 7gal (US)
Long Stick and Optional Counterweight: Blade Down - Front 985 kg (2,172 lb)*
Long Stick and Optional Counterweight: Blade Down - Side 521 kg (1,149 lb)
Note * The loads listed are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included here.
Standard Stick: Blade Down - Front 992 kg (2,187 lb)*
Standard Stick: Blade Down - Side 456 kg (1,005 lb)
Long Stick and Optional Counterweight: Blade Down - Front 739 kg (1,630 lb)*
Long Stick and Optional Counterweight: Blade Down - Side 402 kg (886 lb)
Note * The loads listed are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included here.
Standard Stick: Blade Down - Front 750 kg (1,654 lb)*
Standard Stick: Blade Down - Side 351 kg (774 lb)
Long Stick and Optional Counterweight: Blade Down - Front 591 kg (1,303 lb)*
Long Stick and Optional Counterweight: Blade Down - Side 322 kg (711 lb)
Note * The loads listed are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included here.
Standard Stick: Blade Down - Front 597 kg (1,316 lb)*
Standard Stick: Blade Down - Side 283 kg (623 lb)
Long Stick and Optional Counterweight: Blade Down - Front 478 kg (1,054 lb)*
Long Stick and Optional Counterweight: Blade Down - Side 267 kg (588 lb)
Note * The loads listed are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included here.
Standard Stick: Blade Down - Front 517 kg (1,141 lb)*
Standard Stick: Blade Down - Side 252 kg (556 lb)

Standard Equipment:

  • Standard Equipment
    • 1-way and 2-way (combined function) auxiliary hydraulic lines
    • 300 mm rubber track
    • Canopy with Tip Over Protection (TOPS) ISO 12117
    • Dozer blade with float function
    • Hydraulic oil cooler
    • Maintenance free battery
    • Retractable seat belt
    • Suspension seat, vinyl covered
    • Travel pedals
    • Working light mounted to boom

Optional Equipment:

  • Optional Equipment
    • Additional hydraulic circuit diverted from bucket cylinder
    • Auto idle (Standard in North America)
    • Bio oil
    • Boom check valve
    • Cab, radio ready with FOPS ISO 10262 (Level 1), Tip Over Protection (TOPS) ISO 12117, heater/defroster, interior light and windscreen wiper
    • Custom color paint
    • Ecology drain for engine oil
    • Ecology drain for hydraulic tank
    • Front screen guard for cab and canopy
    • Joystick mounted proportional auxiliary control
    • Mechanical quick coupler
    • Mirror pack
    • Rotating beacon
    • Suspension seat, fabric covered
    • Thumb ready stick (Standard in North America)
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader