735 Articulated Truck | gregorypoole

Bore	5.1in
Displacement	736in³
Emissions	The 735 meets Tier 4 Final and Stage V emission standards.
Engine Model	Cat® C13
Engine Model - U.S. EPA Tier 4 Final/EU Stage V	Cat C13
Gross Power - SAE J1995	434HP
Net Power - ISO 14396	429HP
Net Power - SAE J1349	424HP
No Engine De-rating Below	12500ft
Note (1)	The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (2)	The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (3)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)	Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (5)	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
Peak Engine Torque Gross (SAE J1995)	1614ft·lbf
Peak Engine Torque Net (SAE J1349)	1597ft·lbf
Peak Engine Torque Speed	1200r/min
Stroke	6.2in

Rated Payload	35.3ton (US)

Heaped (SAE 2:1)	26.2yd³
Struck	20.3yd³
Tailgate Heaped SAE 2:1	27.9yd³
Tailgate Struck	21.3yd³

Forward - 1	5mile/h
Forward - 2	9mile/h
Forward - 3	14mile/h
Forward - 4	22mile/h
Forward - 5	30mile/h
Forward - 6	35mile/h
Reverse - 1	6mile/h

Cooling System	21.9gal (US)
DEF Tank	5.3gal (US)
Engine Crankcase	10gal (US)
Final Drives/Differential	33gal (US)
Fuel Tank	108.8gal (US)
Hydraulic System	29.1gal (US)
Output Transfer Gear Box	5.5gal (US)
Transmission	12.3gal (US)

Interior Cab	72dB(A)
Note (1)	The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the
Note (2)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Lower Time	11s
Raise Time	12s

Brakes	ISO 3450 – 2011
Cab - FOPS	ISO 3449 Level II – 2005
Cab - ROPS	ISO 3471 – 2008
Steering	ISO 5010 – 2007

Center Axle - Empty	11001lb
Center Axle - Loaded	41756lb
Center Axle - Rated Load	30754lb
Front Axle - Empty	34128lb
Front Axle - Loaded	43166lb
Front Axle - Rated Load	9039lb
Rear Axle - Empty	10516lb
Rear Axle - Loaded	41270lb
Rear Axle - Rated Load	30754lb
Total - Empty	55645lb
Total - Loaded	126192lb
Total - Rated Load	70548lb

Lock to Lock	4.75 seconds @ 60 rpm

Type	High strength Brinell HB450 wear resistant steel

Note	Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Aisle Width	212in
Turning Dimensions - Clearance Radius	318in
Turning Dimensions - Inside Radius	149in
Turning Dimensions - SAE Turning Radius	294in
Turning Dimensions - Steer Angle - Left/Right	45°

Hydraulic Excavators: 336F/336F XE - Passes	5–6
Hydraulic Excavators: 349F/349F XE - Passes	4–5
Note	An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased
Wheel Loader: 950M - Passes	5
Wheel Loader: 962M - Passes	4–5
Wheel Loaders: 966M/966M XE - Passes	4
Wheel Loaders: 972M/972M XE - Passes	3–4

Base Plate	0.51in
Front Plate	0.28in
Side Plates	0.43in

Standard Equipment:

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
- Tilt and telescopic steering wheel
- Adjustable air vents
- Retractable belt: Operator seat and second seat
- Glass windows:
  – Front, laminated and tinted
  – Sides and rear, toughened and tinted
- Liquid Crystal Display (LCD):
  – Alert indicator
  – Selected gear and direction
  – Speed or auto shift
  – Review Operation and Maintenance Manual (OMM)
  – Primary steering failure warning
  – Seat belt warning
  – Secondary steering failure warning
  – Diesel Particulate Filter (DPF) regeneration filter
  – Machine Security System (MSS)
  – Secondary steering energy source engaged
  – Hour meter
  – Retarder active
- Air conditioning with R134A refrigerant
- Mirrors: extensive arrangement for improved visibility
- Combined gear selection and hoist control lever
- Seats:
  – Operator: fully adjustable, air suspension
  – Trainer: padded with lap belt
- Sun visor
- Windshield wiper and washer, two speed (rear)
- Windshield wiper and washer, two speed, intermittent (front)
- Windows opening side, tinted
- Storage:
  – Cup holder
  – Flask receptacle
  – Under seat storage
  – Door pocket
  – Behind operator seat storage
  – Coat hook
- Touchscreen display incorporating the rearview camera video feed
- Secondary steering – electro hydraulic
- Heater and defroster with four-speed fan
- Machine operation monitoring system includes:
  – Action lamp
  – Engine oil pressure
  – Primary steering system
  – Left and right turn signal
  – High beam
  – Coolant temperature
  – Tachometer
  – Parking brake
  – Fuel level
  – Transmission oil temperature
  – Brake system
  – Transmission hold
  – Hoist control
  – Hydraulic system
  – Charging system
  – Retarder
  – Transmission fault
  – Traction control system
  – Check engine lamp
Cat Technologies
- Cat Detect with Stability Assist
- Product Link
Electrical And Lighting
- Remote starting receptacle (cables not included)
- Horn
- Lighting systems:
  – Cab interior
  – Two head lamps
  – Two width marker
  – Two reversing
  – Work light/cab access light
  – Two stop/tail lights
  – Front and rear direction indicators
- Main disconnect switch
- Electrical system: 24-volt, 10A 24- to 12-volt converter
- Batteries (two) maintenance free
Power Train
- Differentials: standard with automatic clutched inter- and cross-axle differential locks
- Cat Clean Emission Module (CEM) and exhaust aftertreatment package
- Cat C13 engine
- Three axle, six-wheel drive
- Retarder: engine compression brake
- Dual circuit oil immersed, enclosed brakes – all wheels
- Auto shift six-speed forward and one reverse transmission
Safety
- Rearview camera
- ROPS/FOPS cab
- Reverse alarm
Guards
- Radiator
- Front dump body spill guard, integral part of fabricated body
- Crankcase
- Rear window
- Axle
Other Standard Equipment
- Tires, six 750/65 R25
- Mud flaps: wheel arch and body mounted with transportation tiebacks
- S·O·S sampling valves
- Vandalism protection: lockable caps
- Sound suppression (only standard in Europe)

Optional Equipment:

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Optional Equipment
- Engine block heater
- Heated rearview motorized mirrors
- Scissor tailgate
- Ether start
- Flashing LED beacon
- Cold weather start attachment
- Infrared glass – high ambient cab
- Product Link Elite: PLE631 (satellite), PLE641 (cellular). Product Link is optional.
- Bare chassis (no body) standard wheel base
- Fuel additive – anti-waxing
- Body liners
- Bare chassis (no body) long wheel base
- Four-point seat belt
- Auto lube installation for automatic greasing of bearings
- Cat Production Measurement payload monitoring system
- Sound suppression (only standard in Europe)
- Fast fuel fill
- Heated/cooled seat
- Roof mounted High Intensity Discharge (HID) work lights
- Machine Security System (MSS)
- Bluetooth radio stereo system
- Exhaust heated body
- Cold weather coolant –51° C (–60° F)
- Window blinds
- Wheel chocks

Standard Equipment:

Optional Equipment:

Cat® Detect with Surround Cameras

Contact Us Today