Cat® C18 Industrial Diesel Engine

Back to Home

The Cat® C18 Industrial Diesel Engine is offered in ratings ranging from 429-522 bkW (575-700 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Ratings: 571-597 bkW (765-800 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards. Non-certified ratings are also available at 429-522 bkW (575-700 bhp) @ 1800-2100. Industries and applications powered by C18 engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers, Grinders, Compactors, Rollers, Compressors, Construction, Cranes, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.

Request a quote
Maximum Power 800HP
Maximum Torque 2696lb-ft @ 1400 rpm
Minimum Power 575HP
Rated Speed 1800-2100 rpm
Emissions China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified
Height 49.5in
Length 55.7in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 3688lb
Width 38.3in
Aftertreatment -
Aspiration Turbocharged Aftercooled (TA)
Bore 5.7in
Combustion System Direct Injection
Compression Ratio 16.3:1
Displacement 1104.5in³
Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
Rotation from Flywheel End Counterclockwise
Stroke 7.2in

Standard Equipment:

  • Air Inlet System
    • Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)
    • Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp)
    • Air-to-Air Aftercooled
  • Charging System
    • Charging alternator 24 volt, 50 amp
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE No. 1 or SAE No. 0 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • Fuel filter, tertiary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment: