CAREERS
(800) 451-7278

Contact us

Contacto
SEARCH

CALL US
CONTACT US
Menu

Cat® C13 Industrial Power Unit

  • Home
  • New Power
  • Cat® C13 Industrial Power Unit
    • Back to Home

    The Cat® C13Industrial Power Unit is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

    Request a quote

    The Cat® C13Industrial Power Unit is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

    Request a quote
    Maximum Power 520HP
    Minimum Power 385HP
    Rated Speed 1800-2100 rpm
    Emissions U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 and Korea Tier 4 Final emissions standards
    Aftertreatment DOC+DPF+SCR
    Aspiration Turbocharged Aftercooled (TA)
    Bore 5.1in
    Compression Ratio 17.0:1
    Displacement 762.8in³
    Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
    Rotation from Flywheel End Counterclockwise
    Stroke 6.2in
    Height 82in
    Length 83.5in
    Weight 5080lb
    Width 49in
    Height 21.7in
    Length 33.6in
    Volume Capacity 51.1qt (US)
    Weight 42.8lb
    Width 11.3in

    Standard Equipment:

    • Air Inlet System
      • Turbocharged
      • Air-to-Air Aftercooled
      • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage V)
    • Control System
      • Electronic control system
      • Over-foam wiring harness
      • Automatic altitude compensation
      • Power compensated for fuel temperature
      • Configurable software features
      • Engine monitoring system SAE J1939 broadcast and control
      • Integrated Electronic Control Unit (ECU)
      • Remote fan control
    • Cooling System
      • Vertical or RH thermostat outlet
      • Centrifugal water pump
      • Guidance on cooling system design available through your dealer to ensure equipment reliability
    • Flywheels And Flywheel Housing
      • SAE No. 1 flywheel housing
      • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage V).
    • Fuel System
      • MEUI injection
      • Primary fuel filter
      • Secondary fuel filters
      • Fuel transfer pump
      • Electronic fuel priming
    • Lube System
      • Open crankcase ventilation system
      • Oil cooler
      • Oil filler
      • Lube oil filter
      • Oil dipstick
      • Gear driven oil pump
      • Choice of front, rear or center sumps
      • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage V)
    • Power Take Off (pto)
      • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
    • General
      • Paint: Cat yellow
    • U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
      • Cat Regeneration System
      • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
      • Aftertreatment Electronic Control Unit (ECU)
      • NOx Reduction System (NRS)
      • Pump Electronic Control Unit (PETU)
      • Selective Catalytic Reduction (SCR)
      • Available in 12V or 24V systems

    Optional Equipment:

    Contact Us Today

    Get In Touch
    Call: (800) 451-7278