New 995 Wheel Loader in North Carolina

Back to Home

Built to the same size as the 994K but offering a higher rated payload, the new Cat® 995 Wheel Loader gives you greater productivity and performance while using less fuel. It offers a one-pass reduction when loading Cat 785, 789 and 793 Mining Trucks — increasing production and efficiency up to 33% when loading the 785, up to 25% when loading the 789, and up to 20% with the 793. The 995 demonstrates 21% higher efficiency and 24% more production than the 994K in equal operating mode thanks to a higher rated payload and 6% increase in hydraulic force. In Enhanced Eco Mode, the 995 demonstrates up to a 30% increase in efficiency and an 11% reduction in hourly fuel consumption versus the 994K in throttle lock mode, which translates to 23% less CO2 per unit of material moved. It also offers a more comfortable operator environment and is infused with new technology features that allow additional gains in efficiency.

Pricing: Contact for Pricing

Request a quote
Bore 6.7in
Displacement 4766in³
Emissions U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
Engine Model Cat® 3516E
Engine Power - ISO 14396 1847HP
Gross Power - SAE J1995 1870HP
Net Power - SAE J1349 - High Ambient 1696HP
Net Power - SAE J1349 - Standard Ambient 1739HP
Note (1) The power ratings apply when tested under the reference conditions for the specified standard.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
Note (3) The gross power advertised is with the fan at maximum speed.
Peak Torque - 1,200 rpm - SAE J1995 8549lb/ft
Stroke 8.5in
Torque Rise 39%
Bucket Capacity Range 17.2-43.6 m3 (22.3-57 yd3)
Cat Truck Match - High Lift 789/793/794
Cat Truck Match - Standard 785/789
Note *Please contact your local dealer to determine if your application is suitable for this increased rated payload.
Operating Weight - High Lift 547675lb
Operating Weight - Standard 543772lb
Rated Payload - High Lift (Low to Moderate Digging Resistance) 55ton (US)
Rated Payload - High Lift (Moderate to High Digging Resistance) 50ton (US)
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) 60ton (US)
Rated Payload - Standard Lift (Moderate to High Digging Resistance) 50ton (US)
Direct Drive - Forward 1 Lock-up disables
Direct Drive - Forward 2 8.7mile/h
Direct Drive - Forward 3 15.2mile/h
Direct Drive - Reverse 1 Lock-up disables
Direct Drive - Reverse 2 9.6mile/h
Direct Drive - Reverse 3 16.8mile/h
Forward - 1 4.6mile/h
Forward - 2 8mile/h
Forward - 3 13.6mile/h
Note Travel speeds based on 58/85-57 tires.
Reverse - 1 5mile/h
Reverse - 2 8.8mile/h
Reverse - 3 14.9mile/h
Transmission Type Cat Planetary Power Shift
Cylinders, Double Acting - Lift, Bore and Stroke 370 × 1713 mm (14.6 × 67.4 in)
Cylinders, Double Acting - Tilt, Bore and Stroke 310 × 1086 mm (12.2 × 42.8 in)
Lift/Tilt System - Circuit Positive Flow Control
Lift/Tilt System - Pump Variable Displacement Piston
Maximum Flow at 1,700 rpm Engine Speed 541gal/min
Pilot System Open Loop and Pressure Reducing
Relief Valve Setting - Lift/Tilt 5004psi
Dump 3.1s
Lower Float Down 4.2s
Rack Back 4.9s
Raise 12.6s
Cooling System 138gal (US)
Differential - Final Drives - Front 220gal (US)
Differential - Final Drives - Rear 200gal (US)
Engine Crankcase 76gal (US)
Fuel Tank - Standard 856gal (US)
Fuel Tank - With 24 hr Attachment 1414gal (US)
Hydraulic Tank - Implement and Hydraulic Fan 270gal (US)
Hydraulic Tank - Steering and Braking 100gal (US)
Note *Not available on Tier 4 Final/Stage V machines. Not available in all regions.
Oil Renewal System (ORS)* 20gal (US)
Transmission 110gal (US)
Front Fixed
Oscillation Angle
Rear Trunnion
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) 131°F
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) 127.4°F
Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4°F
Machine Sound Level (ISO 6395:2008) 119dB(A)
Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 74dB(A)
Machine Sound Level (ISO 6395:2008) 117dB(A)
Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 73dB(A)
Steering Cycle Times - High Idle 4.3s
Steering Cycle Times - Low Idle 7.6s
Steering System - Circuit Pilot, Load Sensing
Steering System - Pump Piston, Variable Displacement
Total Steering Angle 80 degrees
B-Pin Height - Maximum Lift 28.8ft
Clearance at Maximum Lift 19.8ft
Dump Angle at Maximum Lift –50.0 degrees
Front Axle Centerline to Bucket Tip 21.9ft
Ground to Bumper Clearance 4.4ft
Ground to Center of Axles 6ft
Ground to Lower Hitch Clearance 2.9ft
Ground to Top of Exhaust Stacks 23.2ft
Ground to Top of Hood 18.6ft
Ground to Top of ROPS 23.4ft
Maximum Overall Height - Bucket Raised 39.3ft
Maximum Overall Length 64.6ft
Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift 59.5 degrees
Rack Back Angle - Carry 47.7 degrees
Rack Back Angle - Ground Level 39.7 degrees
Reach - Maximum Lift 9.6ft
Rear Axle - Centerline to Bumper 20.4ft
Tread Width 14.1ft
Wheel Base 22.3ft
Width - Over Tires - With Bulge 18.8ft
B-Pin Height - Maximum Lift 31.6ft
Clearance at Maximum Lift 22.6ft
Dump Angle at Maximum Lift –50.0 degrees
Front Axle Centerline to Bucket Tip 24.2ft
Ground to Bumper Clearance 4.4ft
Ground to Center of Axles 6ft
Ground to Lower Hitch Clearance 2.9ft
Ground to Top of Exhaust Stacks 23.2ft
Ground to Top of Hood 18.6ft
Ground to Top of ROPS 23.4ft
Maximum Overall Height - Bucket Raised 42.1ft
Maximum Overall Length 66.9ft
Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift 59.4 degrees
Rack Back Angle - Carry 53.5 degrees
Rack Back Angle - Ground Level 45 degrees
Reach - Maximum Lift 9.4ft
Rear Axle - Centerline to Bumper 20.4ft
Tread Width 14.1ft
Wheel Base 22.3ft
Width - Over Tires - With Bulge 18.8ft
Brakes ISO 3450:2011

Standard Equipment:

  • Power Train
    • Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
    • Engine prelube
    • Fuel priming pump (electric)
    • Ground-level engine shutoff
    • Engine air intake (above hood) precleaner
    • Aluminum Modular Radiator (AMR)
    • Automatic, ether starting aid
    • Electronic throttle lock
    • Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
    • Rimpull control system
    • Planetary powershift, 3F/3R electronic control transmission
    • Delayed engine shutdown
    • Oil-cooled, multi-disc, service brakes
    • Electro-hydraulic parking brake
  • Linkage
    • Standard lift
  • Electrical
    • Alternator
    • Batteries, low maintenance
    • 10/15 amp, 24V to 12V converter
    • Disconnect switch to bumper
    • LED warning lights (pattern selectable)
    • LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
    • Emergency jump-start receptacle
    • Starter and transmission lockout in bumper
    • 24V starting and charging system
    • Electric starters
  • Operator Environment
    • Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
    • Bonded glass, tinted
    • Trainer seat
    • Dual-lever lift and tilt function controls
    • Implement kickouts
    • Air conditioner
    • Cab pressure indicator
    • Graphical touchscreen information display conveys real-time operating information
    • Heater, defroster, auto temperature controls
    • Powered cab precleaner
    • Operator presence status
    • Starting/charging system malfunction
    • Electronic OMM
    • Operator controls help
    • Two USB charging ports
    • CB mounting, 12V/24V power and antenna
    • 14-pin service port
    • 12V power
    • Selectable application profiles
    • Entertainment radio mute
    • Push-To-Start (PTS)
    • Warning/indicator instrumentation
    • Keypad control with indicator lights
    • Dome light in cab
    • Lunchbox and beverage holders
    • Electro-hydraulic force feedback steering
    • Vital Information Management System (VIMS) with information display: external data port, cycle timer
    • Coat hook
    • Gauge instrumentation with configurable widgets:
      – Status indicators

      – Wheel rev counter

      – Simplified payload

      – Tire pressure monitoring system (optional)

      – Bucket angle

      – Coolant temperature

      – Hydraulic oil temperature

      – Fuel level

      – Power train oil temperature

      – Engine speed (tachometer)

      – Transmission gear

      – Ground speed

      – Engine hour meter

  • Safety
    • Ground-access ladders
    • Rear-vision camera
    • Front frame access with steps
    • Front walkway around cab
    • Pump bay access ladders with T-handle and platform
    • Tie-offs on ROPS and radiator guards
    • Steering frame lock
    • Stairways on both sides of the machine
    • LED stairway and access lights
    • Toe kicks
    • Electric (field and shop) horns
    • Retractable seatbelt, 76 mm (3 in) wide
    • Trainer seat with lap belt, 76 mm (3 in) wide
    • Back-up alarm
    • Secondary steering
  • Machine Control And Guidance
    • MineStar Health ready
    • MineStar GUIDE ready
    • MineStar Edge ready
  • Fuel Tank
    • 12 hour (3240 L/856 gal)
  • Cooling
    • Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
  • Ground-level Service Center
    • Service center light
    • Implement and cooling fan oil level indicator
    • Steering and brake oil level indicator
    • Window washer solvent level indicator
    • Transmission oil level indicator
    • DEF level indicator (if equipped)
    • Fuel level indicator
    • Engine oil level indicator
    • Engine coolant level indicator
    • Automatic lubrication system grease tank level indicator
    • DEF purge indicator lamp
    • Transmission lockout and LED
    • Starter lockout and LED
    • Heavy-duty battery disconnect switch
    • Stairway light switch
    • Service lighting switch (if equipped)
    • Fuel shutoff engine shutdown switch
    • Engine oil fast-fill port
    • Transmission oil fast-fill port
    • Steering and brake hydraulic oil fast-fill port
    • Steering and brake hydraulic oil drain port
    • Oil renewal system fast-fill port (if equipped)
    • Engine coolant fast-fill port
    • DEF fill port (HRC only)
    • Implement and cooling fan hydraulic oil fast-fill port
    • Implement and cooling hydraulic oil drain port
    • Automatic lubrication system grease tank fill port
    • 24V jump-start receptacle
    • 240V jacket water and engine oil heater plug (if equipped)
    • 12V power port
    • VIMS key switch
    • 14-pin machine data port
  • Service
    • EH steering eliminates need for neutralizer adjustment
    • In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
    • High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
    • Pump efficiency monitoring
    • Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
    • Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
    • Rock guards on linkage grease lines
    • Cat O-ring face seal couplings
    • Lockable service access doors
    • Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
    • High-speed engine oil change system
    • Ground-level fast-fill fuel system
    • Transmission guard
    • Drawbar hitch with pin
    • Cat XT hoses
    • Left-side service center
    • Oil sampling valves
    • Automatic Autolube filling shutoff valve
    • Telematics and Cat Electronic Technician service port in bumper
    • Air filter remaining useful life sensor
    • Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
    • Rear access to cab and service platform
    • Load-sensing steering
    • Supplemental steering system
    • Vandalism protection caplocks
    • Cooling cleanout service package
    • VIMS download and Cat Electronic Technician service port in bumper
    • Service lights (engine bay, service center)
    • EH steering eliminates need for neutralizer adjustment
  • Efficiency
    • On demand throttle, HP Plus, and Enhanced ECO Modes
    • Variable displacement implement pumps
    • Variable displacement load sensing steering
    • Variable displacement cooling fan pump
    • Torque converter lock-up clutch

Optional Equipment:

  • Power Train
    • Oil Renewal System (ORS)* (for increased time between oil changes)
  • Linkage
    • High lift
  • Operator Environment
    • Rubber-mounted, high-impact resistant solar control glass
    • Trainer seat with suspension
    • Joystick lift and tilt function controls
    • Bluetooth®-enabled machine security
    • Sun screen, pull down (front and rear)
    • AM/FM/AUX radio
    • AM/FM/AUX/USB/BT/CD/SAT radio
  • Safety
    • Powered ground-access stairs
    • Cat Detect (Rear Object Detection)
    • Wheel chocks
  • Cold Weather
    • Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
    • Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
    • 240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
    • Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
    • Heated mirrors (recommended for below-freezing temperatures)
  • Machine Control And Guidance
    • Cat Payload with Overload Prevention
    • New Autodig Components:
      – Tire slip prevention

      – Lift stall prevention

      – Tire set

    • Operator coaching
  • Fuel Tank
    • 24 hour (5350 L/1414 gal)
  • Cooling
    • High ambient package (recommended for site conditions that do not exceed 53° C [127° F])
  • Rims And Tires
    • Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
    • Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
    • Tires – 58/85-57 84PR L4 (require 47" rims)
  • Spare Rims
    • 1194 mm (47") 152 mm (44 × 57) (6") flange
    • 1194 mm (47") 127 mm (47 × 57) (5") flange
  • Service
    • Product Link satellite
    • Product Link cellular
    • Product Link (dual mode – satellite/cellular)
    • Additional service lights (pump bay, front frame and bumper)
  • Sound
    • Sound-suppression package

Coming Soon

Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader