| Biodiesel Capability | Up to B20¹ |
|---|---|
| Displacement | 763in³ |
| Displacement | 12.5L |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
| Engine Model | Cat® C13 |
| Engine Power - 1,700 rpm ISO 14396:2002 | 432hp |
| Engine Power - 1,700 rpm ISO 14396:2002 | 438 hp (metric) |
| Engine Power @ 1,700 rpm – ISO 14396:2002 | 432hp |
| Engine Torque - 1,200 rpm ISO 14396:2002 | 1620lbf·ft |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 | 1620lb/ft |
| Gross Power - 1,700 rpm SAE J1995:2014 | 436hp |
| Gross Power - 1,700 rpm SAE J1995:2014 | 442 hp (metric) |
| Gross Power @ 1,700 rpm – SAE J1995:2014 | 436hp |
| Gross Torque - 1,200 rpm SAE J1995:2014 | 1636lbf·ft |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | 1636lb/ft |
| Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011 | 404hp |
| Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011 | 409 hp (metric) |
| Net Torque - 1,100 rpm ISO 9249:2007, SAE J1349:2011 | 1515lbf·ft |
| Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 | 1515lb/ft |
| Note (1) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels**up to: 20% biodiesel FAME (fatty acid methyl ester) ***100% |
| Note (3) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
| Note | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, open differential axles (front/rear), secondary steering, sou |
|---|---|
| Operating Weight | 78264lb |
| Forward - 1 | 3.9mile/h |
|---|---|
| Forward - 2 | 7.3mile/h |
| Forward - 3 | 13mile/h |
| Forward - 4 | 24.5mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
| Reverse - 1 | 4.4mile/h |
| Reverse - 2 | 8.4mile/h |
| Reverse - 3 | 17.4mile/h |
| Exterior Sound Power Level - ISO 6395:2008 | 110dB(A) |
|---|---|
| Exterior Sound Power Level - ISO 6395:2008² | 107dB(A) |
| Note (1) | ¹Including countries that adopt the EU and UK Directives. |
| Note (2) | ²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701. |
| Operator Sound Pressure Level - ISO 6396:2008 | 70dB(A) |
| Operator Sound Pressure Level - ISO 6396:2008 ¹ | 70dB(A) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system c |
|---|
| Breakout Force | 59060lbf |
|---|---|
| Note (1) | For a machine configuration as defined under “Weight.” |
| Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 59060lb |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 46526lb |
| Cooling System | 13.7gal (US) |
|---|---|
| Crankcase | 9.8gal (US) |
| DEF Tank | 5.5gal (US) |
| Differential - Final Drives - Front | 24.3gal (US) |
| Differential - Final Drives - Rear | 24.3gal (US) |
| Fuel Tank | 112.5gal (US) |
| Hydraulic Tank | 40.4gal (US) |
| Transmission | 20.3gal (US) |
| Hydraulic Cycle Time - Total | 10.1s |
|---|---|
| Implement System - Maximum Operating Pressure | 4975psi |
| Ground Clearance | 1.33ft |
|---|---|
| Height - Top of Hood | 10ft |
| Height - Top of ROPS | 12.5ft |
| Hinge Pin Height at Carry Height | 2.58ft |
| Hinge Pin Height at Maximum Lift | 15.5ft |
| Lift Arm Clearance at Maximum Lift | 12.75ft |
| Note | All dimensions are approximate and based on machine equipped with 6.1 m³ (8.0 yd³) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
| Overall Length - Without Bucket | 28.25ft |
| Rack Back - Carry Height | 48° |
| Rack Back - Maximum Lift | 57° |
| Tread Width | 8.33ft |
| Wheel Base | 12.5ft |
| Width over Tires (Loaded) | 11.42ft |
| Ground Clearance | 1.33ft |
|---|---|
| Height - Top of Hood | 10ft |
| Height - Top of ROPS | 12.5ft |
| Hinge Pin Height at Carry Height | 2.92ft |
| Hinge Pin Height at Maximum Lift | 16.58ft |
| Lift Arm Clearance at Maximum Lift | 13.33ft |
| Note | All dimensions are approximate and based on machine equipped with 6.1 m³ (8.0 yd³) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
| Overall Length - Without Bucket | 29.92ft |
| Rack Back - Carry Height | 49° |
| Rack Back - Maximum Lift | 56° |
| Tread Width | 8.33ft |
| Wheel Base | 12.5ft |
| Width over Tires (Loaded) | 11.42ft |
