| Biodiesel Capability | Up to B20¹ |
|---|---|
| Bore | 4ft |
| Displacement | 268.5in³ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Engine Model | Cat C4.4 |
| Engine Power - ISO 14396 (DIN) | 150hp (metric) |
| Engine Power - ISO 14396:2002 | 148hp |
| Net Power - ISO 9249 | 141hp |
| Net Power - ISO 9249 (DIN) | 143hp (metric) |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
| Note (1) | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. |
|---|---|
| Operating Weight Maximum | 36400lb |
| Maximum Travel Speed | 21.7mile/h |
|---|
| Main System - Maximum Flow - Implement | 73gal/min |
|---|---|
| Maximum Pressure - Equipment | 5076psi |
| Maximum Pressure - Swing | 5076psi |
| Maximum Pressure - Travel | 5076psi |
| Maximum Swing Torque | 32560ft·lbf |
|---|---|
| Swing Speed | 10.2r/min |
| Cooling System | 6.3gal (US) |
|---|---|
| Final Drive | 0.7gal (US) |
| Fuel Tank | 92.5gal (US) |
| Hydraulic System - Including Tank | 68.7gal (US) |
| Hydraulic Tank | 31.7gal (US) |
| Boom | 5205 mm (17' 1") |
|---|---|
| Bucket | GD 0.8 m3 (1.05 yd3) |
| Counterweight Clearance | 4.3ft |
| Ground Clearance | 1.3ft |
| Shipping Height - Top of Cab | 10.5ft |
| Shipping Length | 8630ft |
| Stick | 2.5 m (8' 2") |
| Support Point | 12.7ft |
| Tail Swing Radius | 7.7ft |
| Undercarriage Length | 16.3ft |
| Wheel Base | 8.4ft |
| Boom Type | VA Boom |
|---|---|
| Bucket | GD 0.8 m3 (1.05 yd3) |
| Cutting Height | 33.2ft |
| Digging Height | 18.5ft |
| Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). |
| Reach at Ground Level | 29.4ft |
| Stick | R2.5 (8' 2") |
| Vertical Wall Digging Depth | 14.5mm |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
|---|
