Displacement | 220in³ |
---|---|
Engine Model | Cat® C3.6 |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 104hp |
Net Power - 2,200 rpm - SAE J1349 | 104hp |
Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
Power - Net | 104hp |
Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
---|---|
Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
Operating Weight | 20639.68lb |
Operating Weight | 20640lb |
Operating Weight - LGP | 21369lb |
Operating Weight - LGP, 762 mm/30 in | 21810lb |
Drive Pumps | 1 |
---|---|
Maximum Travel Speed - Forward | 5.6mile/h |
Maximum Travel Speed - Reverse | 6.2mile/h |
Relief Valve Settings | 7033psi |
Track Motors | 2 |
Pump Output | 17.2gpm |
---|---|
Relief Valve Settings | 2988psi |
Height | 6.5in |
---|---|
Maximum Digging Depth | 13.3in |
Maximum Ground Clearance Under Tip | 17.6in |
Maximum Reach - Ground Line | 30.2in |
Number of Shanks | 3 |
Overall Width | 67.3in |
Type | Parallelogram |
Weight | 1222lb |
Ground Pressure - LGP | 4.5psi |
---|---|
Ground Pressure - LGP, 762 mm (30 in) | 3.9psi |
Length - Track on Ground - LGP | 91in |
Length - Track on Ground - LGP, 762 mm (30 in) | 91in |
Number of Rollers - Each Side | 7 |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 40 |
Shoe Width - LGP | 26in |
Shoe Width - LGP, 762 mm (30 in) | 30in |
Shoe Width - Standard | 20in |
Track Gauge | 63in |
Track Gauge - LGP | 69in |
Track Gauge - LGP, 762 mm (30 in) | 73in |
Ground Pressure | 5.7psi |
---|---|
Length of Track on Ground | 91in |
Number of Shoes - Each Side - Abrasion Undercarriage | 36 |
Cooling System | 5gal (US) |
---|---|
Crankcase - With Filter | 2.8gal (US) |
Diesel Exhaust Fluid (DEF) Tank | 4.9gal (US) |
Final Drive - Each - LGP | 2.6gal (US) |
Fuel Tank | 51.5gal (US) |
Transmission - Hydraulic Tank | 23.8gal (US) |
Final Drives - Each Side | 2.6gal (US) |
---|
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 14 |
---|
BLADE: Blade Capacity (SAE) - LGP | 3.06yd³ |
---|---|
BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
BLADE: Blade Height - LGP | 39.8in |
BLADE: Blade Lift Height - LGP | 30.2in |
BLADE: Blade Width - LGP | 126.7in |
BLADE: Blade Width at Maximum Angle - LGP | 115.8in |
BLADE: Digging Depth - LGP | 23.2in |
BLADE: Maximum Angle (either side) - LGP | 25° |
BLADE: Maximum Tilt - LGP | 17.7in |
Dozer Height - LGP | 109in |
Dozer Height - LGP, 762 mm (30 in) | 109in |
Dozer Height - Standard | 109in |
Ground Clearance - LGP | 13in |
Ground Clearance - LGP, 762 mm (30 in) | 13in |
Length of Basic Dozer (without blade) - LGP | 128.7in |
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) | 128.7in |
Length of Basic Dozer (without blade) - Standard | 128.7in |
Note | With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) |
Overall Length - With Blade - LGP | 169.6in |
Overall Length - With Blade - LGP, 762 mm (30 in) | 169.6in |
Track Gauge - LGP | 67.9in |
Track Gauge - LGP, 762 mm (30 in) | 73in |
Width of Dozer (standard shoes, no blade) - LGP | 94.9in |
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) | 103.5in |
Width of Dozer (standard shoes, no blade) - Standard | 83in |
BLADE: Blade Capacity (SAE) - Standard | 2.86yd³ |
---|---|
BLADE: Blade Cutting Edge Angle, Adjustable - Standard | 52° to 58° |
BLADE: Blade Height - Standard | 42.2in |
BLADE: Blade Lift Height - Standard | 30.2in |
BLADE: Blade Width - Standard | 109.5in |
BLADE: Blade Width at Maximum Angle - Standard | 103.8in |
BLADE: Digging Depth - Standard | 23.8in |
BLADE: Maximum Angle (either side) - Standard | 25° |
BLADE: Maximum Tilt - Standard | 15.8in |
Ground Clearance - Standard | 13in |
Note | Abrasion Undercarriage |
Overall Length - With Blade - Standard | 170.7in |
Track Gauge - Standard | 63in |
Power Train | Hydrostatic |
---|
FOPS | ISO 3449:2005 Level II |
---|---|
ROPS | ISO 3471:2008 |
Control | Hydraulic |
---|---|
Drum Capacity - Optional Cable | 195ft |
Drum Capacity - Recommended Cable | 277ft |
Drum Diameter | 8in |
Drum Width | 9.65in |
Maximum Line Pull - Bare Drum | 32150lb |
Maximum Line Pull - Full Drum | 20350lb |
Maximum Line Speed - Bare Drum | 50ft/min |
Maximum Line Speed - Full Drum | 79ft/min |
Overall width | 27.91in |
Rope Diameter - Optional | 0.75in |
Rope Diameter - Recommended | 0.63in |
Speed | Variable |
Throat Clearance | 5.6in |
Weight | 1747lb |
Winch Drive | Hydraulic |
Winch Length | 35.63in |
Control | Hydraulic |
---|---|
Drum capacity – optional | 256ft |
Drum capacity – recommended cable | 371ft |
Drum diameter | 10in |
Drum width | 10.8in |
Maximum line pull – bare drum | 40000lb |
Maximum line pull – full drum | 25000lb |
Maximum line speed – bare drum | 131ft/min |
Maximum line speed – full drum | 207ft/min |
Overall width | 29.2in |
Rope diameter – optional | 0.75in |
Rope diameter – recommended | 0.63in |
Speed | Variable |
Throat clearance | 6.75in |
Weight | 1345lb |
Winch drive | Hydrostatic |
Winch length | 27.76in |