| Bucket Payload | 67ton (US) |
|---|---|
| Engine Output - SAE J1995 | 3015hp |
| Note | Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. |
| Operating Weight | 660ton (US) |
| Engine Model | 2 x Cat 3512E |
|---|
| Aspiration | Turbocharged and charge air-cooled |
|---|---|
| Bore | 6.69in |
| Components (1) | Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) |
| Components (2) | High-capacity water separator |
| Components (3) | Two-stage fuel filter with series filtration |
| Components (4) | Heavy-duty air filters |
| Components (5) | Microprocessed engine management |
| Components (6) | Hydraulically driven radiator fan with electronically controlled fan speed |
| Components (7) | Exhaust manifold and turbo heat shields |
| Displacement | 3574in³ |
| Number of Cylinders - Each Engine | 12 |
| Rated Speed | 1,800 min-1 (1,800 rpm) |
| Stroke | 8.46in |
| Emissions | Optimized for fuel consumption. |
|---|---|
| Gross Power - SAE J1995 | 3025hp |
| Net Power - ISO 9249 | 2990hp |
| Net Power - SAE J1349 | 2821hp |
| Emissions | Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. |
|---|---|
| Gross Power - SAE J1995 | 3015hp |
| Net Power - ISO 9249 | 2979hp |
| Net Power - SAE J1349 | 2810hp |
| Batteries in Series/Parallel Installation | 6 x 210 Ah; 12 V each; 630 Ah 24 V in total |
|---|---|
| Components (1) | 6 maintenance-free batteries |
| Components (2) | Lockable battery isolator switch |
| Components (3) | Lockable starter isolator switch |
| Components (4) | 13 LED high-brightness working flood lights |
| Components (5) | 17 LED service lights |
| Components (6) | 2 electric horns (1 cab module; 1 oil cooler module) |
| System Voltage | 24 V |
| 6060 FS - Ground Pressure | 26.6 N/cm2 (38.5 psi) |
|---|---|
| 6060 FS - Operating Weight | 1320110lb |
| 6060 FS - Standard Track Pads | 4.58ft |
| Backhoe - Ground Pressure | 26.7 N/cm2 (38.7 psi) |
| Backhoe - Operating Weight | 1323860lb |
| Backhoe - Standard Track Pads | 4.58ft |
| Note | Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. |
| Cooling System | 211.4gal (US) |
|---|---|
| Engine Oil | 86.6gal (US) |
| Fuel Tank | 3136gal (US) |
| Grease Tank | 188gal (US) |
| Hydraulic System - Including Tank | 2483gal (US) |
| Hydraulic Tank | 1876gal (US) |
| Swing Drive | 42.4gal (US) |
| Main Pumps - Diesel Version | 8 variable swash plate pumps |
|---|---|
| Main Pumps - Maximum Oil Flow - Diesel Version | 8 x 650 L/min (8 x 172 gal/min) |
| Maximum Pressure - Attachment | 4640psi |
| Maximum Pressure - Swing Pumps | 5075psi |
| Maximum Pressure - Travel | 5220psi |
| Swing Pumps - Diesel Version | 4 reversible swash plate pumps |
| Swing Pumps - Maximum Oil Flow - Diesel Version | 4 x 352 L/min (4 x 93 gal/min) |
| Components | 4 cooling fans |
|---|---|
| Diameter - Fan | 46in |
| Features (1) | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running |
| Features (2) | Fan speed and flow of oil to the coolers are thermostatically controlled |
| Features (3) | Extremely high cooling efficiency to ensure optimum oil temperature |
| Features (4) | Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers |
| Oil Flow of Cooling Pumps | 4 x 488 L/min (4 x 129 gal/min) |
| Features (1) | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody |
|---|---|
| Features (2) | Closed-loop swing circuit with torque control |
| Features (3) | Hydraulic braking of the swing motion by counteracting control |
| Features (4) | All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system |
| Maximum Swing Speed | 3.8r/min |
| Parking Brakes | Wet multiple disc brake, spring loaded/hydraulically released |
| Swing Drive | 4 compact planetary transmissions with axial piston motors |
| Swing Ring | Triple-race roller bearing with sealed internal gearing |
| Bottom Rollers - Each Side | 7 |
|---|---|
| Components (1) | HD tracks with cast double-grouser track pad |
| Components (2) | HD fixed axle rollers and idlers |
| Components (3) | Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas |
| Components (4) | Acoustic travel alarm (forward and reverse) |
| Components (5) | Fully hydraulic, self-adjusting track tensioning system with piston accumulator |
| Components (6) | Automatic hydraulic retarder valve to prevent over-speed on downhill travel |
| Gradeability - Travel Drives - Maximum | 39% |
| Maximum Tractive Force | 661160lb |
| Support Rollers - Each Side | 2 plus a skid plate in between |
| Track Pads - Each Side | 42 |
| Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors |
| Travel Speed - 1st Stage - Maximum | 0.68mile/h |
| Travel Speed - 2nd Stage - Maximum | 0.99mile/h |
| Components (1) | Single hydraulically driven HVAC System, with dual system option |
|---|---|
| Components (10) | Powered 45 degree access stairway |
| Components (11) | Emergency egress ladder |
| Components (12) | FM/AM radio with USB and AUX input |
| Components (13) | Roller blinds on 3 front windows |
| Components (14) | 3 cup holders |
| Components (15) | Cat Electronic Technician service port |
| Components (2) | In-floor window with removable grate |
| Components (3) | Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support |
| Components (4) | Independently adjustable seat consoles with integrated joysticks |
| Components (5) | Operator Protective Guard (Top Guard) (ISO 10262:1998) |
| Components (6) | Elevated full-size trainer seat with safety belt and laptop desk |
| Components (7) | Additional fold-away auxiliary seat with safety belt |
| Components (8) | Operator Presence switch |
| Components (9) | Monitoring system with 254 mm (10 in) touch screen |
| Internal Dimensions of Cab - Height | 6.75ft |
| Internal Dimensions of Cab - Length | 7.33ft |
| Internal Dimensions of Cab - Width | 5.33ft |
| Operator's Eye Level - Approximately | 24.91ft |
| Capacity - Grease Container | 188gal (US) |
|---|---|
| Type (1) | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times |
| Type (2) | System failures displayed by monitoring system |
| Type (3) | Grease filters (200 µm) between service station and container as well as directly behind grease pump |
| Type (4) | Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring |
| All buckets (FS and BH) are equipped with a wear package consisting of: (1) | Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth |
|---|---|
| All buckets (FS and BH) are equipped with a wear package consisting of: (2) | Wing shrouds on side walls and heel shrouds at bottom edges |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | Constant boom momentum throughout the entire lift arc; Crowd force assistance |
| Type (1) | Catwalks with rails at booms (FS and BH) |
| Type (2) | Guards for shovel cylinders (FS) |
| Type (3) | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
| Type (4) | Service access holes from both sides of boom (FS and BH) and stick (FS) |
| Type (5) | Welding procedures allow for internal counter-welding (double prep weld) wherever possible |
| Type (6) | Booms and sticks are stress-relieved after welding |
| Type (7) | Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas |
| Type (8) | Special wear packages for highly abrasive materials available upon request |
| Maximum Breakout Force | 388780lb |
|---|---|
| Maximum Crowd Force | 494410lb |
| Maximum Digging Depth | 9.17ft |
|---|---|
| Maximum Digging Height | 51.17ft |
| Maximum Digging Reach | 54.17ft |
| Backhoe (heaped 1:1) | 44.5yd³ |
|---|---|
| Face Shovel (heaped 2:1) | 44.5yd³ |
| Bucket Digging Force - ISO | 274840lb |
|---|---|
| Stick Digging Force - ISO | 295740lb |
| Maximum Digging Depth | 29.17ft |
|---|---|
| Maximum Digging Height | 52.83ft |
| Maximum Digging Reach | 62.33ft |
| Equipped With (1) | Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container |
|---|---|
| Equipped With (2) | Cat jump-start socket |
| Equipped With (3) | Indicator lights |
| Installation | Retractable service station installed underneath the engine module and easily accessible from ground. |
