548 Forest Machine

Back to Home

Get more forestry performance from the Cat® 548 Forest Machine. Purpose built for high production work, the 548 optimizes engine, hydraulics, technology and controls delivering peak efficiency and productivity. Enhanced hydraulics, specialized versions and work tools mean you can equip this machine for your specific forestry tasks.

Request a quote
Displacement 428in³
Engine Model Cat C7.1
Engine Speed - Operation 1600r/min
Engine Speed - Travel 1800r/min
Gross Power 204HP
Gross Power - 1,800 rpm 204HP
Number of Cylinders 6
Estimated Operating Weight without Attachment - General Forestry, Processor 77942lb
Maximum Drawbar Pull 70320lbf
Maximum Speed - Rabbit 3mile/h
Maximum Speed - Turtle 1.6mile/h
Maximum Swing Speed (GF) 9.3r/min
Swing Torque (GF) 64441ft·lbf
Auxiliary Pump - Reach with Rotate: Maximum Flow 34.1gal/min
Auxiliary Pump - Reach with Rotate: Maximum Pressure 1499psi
Auxiliary Pump - Reach with Rotate: Pump Drive Gear Ratio 1.28:1
Main Pumps - Maximum Flow - Both Pumps 119.4gal/min
Main Pumps - Maximum Flow - Per Pump 59.7gal/min
Maximum System Pressure - Heavy Lift Mode 5511psi
Maximum System Pressure - Implements 5076psi
Maximum System Pressure - Swing 4424psi
Maximum System Pressure - Travel 5076psi
Cooling System 7.9gal (US)
DEF Tank 12.2gal (US)
Engine Crankcase 6.3gal (US)
Final Drive - Each 2.9gal (US)
Fuel Tank - CWT 261.4gal (US)
Hydraulic System - Total 75.3gal (US)
Hydraulic Tank 46.2gal (US)
Swing Drive 2.4gal (US)
Ground Clearance 30.5in
Track Gauge 110.6in
Track Length 198.2in
Undercarriage Pitch 8.5in
Boom Height 147.4in
Distance Between Idler and Sprocket Centerline 158.2in
Ground Clearance 30.5in
Height of Tilted Side Entry Cab 137in
Overall Height 164in
Overall Length (Reach) 495.7in
Tail Swing Radius 137.8in
Track Gauge 110.6in
Track Length 198.2in
Width - With 700 mm (28 in) Shoes 138.1in
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader