7495 HF Electric Rope Shovel

Back to Home

Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. The Cat 7495 HF with HydraCrowd features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. Its high-flotation undercarriage designed for the oil sands ensures low ground-pressure for improved digging and loading in poor underfoot conditions. The state-of-the-art operator’s cab is the most comfortable and productivity-enhancing in the industry. The 7495 HF is available with a number of new technologies that provide operator assist and machine self-protection, enable proactive maintenance, and deliver real-time information on productivity and performance. An entirely electric machine, the 7495 HF is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.

Request a quote
Dipper Capacity 30.6-62.7 m3 (40-82 yd3)
Dipper Payload 120t
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) 120t
Note Dependent on application and material density
Ballast - Furnished By Customer 667150lb
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection
Note (2) All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers.
Working Weight - With Dipper and Standard Links 3164000lb
Crawler Dimensions - Overall Width 317.5 cm (125 in) Treads 41.67in
Ground Bearing Pressure - Note Ground bearing pressure is dependent upon many factors
Ground Bearing Pressure - Total Effective Bearing Area (317.5 cm/125 in) Treads 57 m2 (248 kPa); 614 ft2 (36 psi)
Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Planetary Propel Dual-motor independent drive
Swing Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Upper Works Overall Width - Including Standard Walkways 41.99in
Components (1) Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Components (2) External fast fill from lower level
Type Automatic, single-line system for open gear lubricant and grease
Drive IGBT Acutrol drive system
Note Other voltage options available to suit customer requirements
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - 60 Hz 7,200V, 13,800V
Power Requirements - Average Power Demand 945-1322 kW
Power Requirements - Peak power 3778 kW
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V
System Voltage - Nominal 50/60 Hz, 7,200V
Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd (1) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Crowd (2) (Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Data - Boom Suspension - Diameter 3.25in
Rope Data - Boom Suspension - No. 4
Rope Data - Dipper Trip - Diameter 0.75in
Rope Data - Dipper Trip - No. 1
Rope Data - Hoist - Diameter 2.75in
Rope Data - Hoist - No. 2
Rope Data - Note High impact ropes available as an option
Dipper Capacities 30.6-62.7 m3 (40-82 yd3)
Dipper Payload 120ton (US)
Maximum Dumping Height 29.53ft
Operating Weight 3164000lb
Cutting Height - Maximum 55ft
Cutting Radius - Maximum 79.72ft
Dumping Height - With Clearance to Open Dipper Door 29.53ft
Note (1) Optimal working ranges based on loading a Cat 797F truck.
Note (2) *All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers.
Radius of Level Floor 55.77ft
Revolving Frame Tail Swing Radius 30.51ft

Coming Soon