Cat® C32

Back to Home

The Cat® C32 Industrial Diesel Engine is offered in ratings ranging from 708-1007 bkW (950-1350 bhp) @ 1800-2100 rpm. These ratings meet U.S. EPA Tier 2 equivalent emission standards. Industries and applications powered by these high power engines include Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, General Industrial, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.

Request a quote
Maximum Power 1350HP
Maximum Torque 4548lb-ft @ 1400 rpm
Minimum Power 950HP
Rated Speed 1800-2100 rpm
Emissions U.S. EPA Tier 2 Equivalent
Height 51.9in
Length 75.5in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 6495lb
Width 58.2in
Aftertreatment -
Aspiration Turbocharged Aftercooled (TA)
Bore 5.7in
Combustion System Direct Injection
Compression Ratio 16.5:1
Displacement 1958.9in³
Engine Configuration V-12, 4-Stroke-Cycle Diesel
Rotation from Flywheel End Counterclockwise
Stroke 6.4in

Standard Equipment:

  • Air Inlet System
    • Twin Turbocharged Aftercooled
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment: