Industrial

Power Rating

Maximum Power
66HP
Maximum Torque
153lb-ft @ 1800 rpm
Rated Speed
2200-3000 rpm
Minimum Power
41.6HP

Emission Standards

Emissions
U.S. EPA Tier 4 Interim Equivalent

Engine Dimensions - Approximate

Length
26in
Width
19.3in
Height
27.5in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
427.7lb

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
3.3in
Stroke
3.9in
Displacement
135in³
Compression Ratio
23.3:1
Aspiration
Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
Combustion System
Indirect Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-

Standard Equipment:

  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheels And Flywheel Housing
    • SAE No. 7 1/2, SAE No. 8 or SAE No. 10 flywheel
    • Choice of SAE No. 4 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Alternative oil fillers
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment: