CAREERS
(800) 451-7278

Contact us

Contacto
SEARCH

CALL US
CONTACT US
Menu

Cat® 3516E Diesel Engine

  • Home
  • New Power
  • Cat® 3516E Diesel Engine
    • Back to Home

    The Cat® 3516E industrial diesel engine is offered at a continuous rating of 1566 kW (2100 hp) @ 1650 rpm and is designed for applications that require continuous heavy-duty service. These engines are capable of being operated at maximum power and speed up to 100% of the time without interuption or load cycling.

    The 3516E is certified to meet EU Stage V, U.S. EPA Tier 4 Final, and California Air Regulations Board (CARB) standards, providing a single solution for higher regulated countries and simplifying installations for OEMs.

    The 3516E offers unsurpassed performance and durability in a wide array of industries and applications, including shredders, chippers, grinders, bore and drill rigs, and pumps as well as other applications in forestry, general industrial, material handling, and mining.

    Request a quote

    The Cat® 3516E industrial diesel engine is offered at a continuous rating of 1566 kW (2100 hp) @ 1650 rpm and is designed for applications that require continuous heavy-duty service. These engines are capable of being operated at maximum power and speed up to 100% of the time without interuption or load cycling.

    The 3516E is certified to meet EU Stage V, U.S. EPA Tier 4 Final, and California Air Regulations Board (CARB) standards, providing a single solution for higher regulated countries and simplifying installations for OEMs.

    The 3516E offers unsurpassed performance and durability in a wide array of industries and applications, including shredders, chippers, grinders, bore and drill rigs, and pumps as well as other applications in forestry, general industrial, material handling, and mining.

    Request a quote
    Maximum Power 2100HP
    Maximum Torque 8275lb-ft @ 1200 rpm
    Minimum Power 2100HP
    Rated Speed 1650 rpm
    Emissions U.S. EPA Tier 4 Final, EU Stage V
    Aftertreatment SCR
    Aspiration Turbocharged Aftercooled (TTA)
    Bore 6.7in
    Combustion System MEUI
    Compression Ratio 16.5:1
    Displacement 4760in³
    Engine Configuration V-16
    Rotation from Flywheel End Counterclockwise
    Stroke 8.5in
    Height 83in
    Length 122.2in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments 18025lb
    Width 63.6in
    Height 31.9in
    Length 92.5in
    Weight 2378lb
    Width 79.1in

    Standard Equipment:

    • Air Inlet System
      • Four turbochargers, centre mounted
      • Air-to-Air Aftercooled (ATAAC)
    • Control System
      • Electronic engine control
    • Exhaust System
      • Two exhaust outlets, 203 mm (8 in) round flange
      • Exhaust manifold, dry
      • Four turbochargers with watercooled bearings
    • Cooling System
      • Gear-driven centrifugal jacket water pump
      • Connections for radiator cooling
      • Thermostats and housing
    • Flywheels And Flywheel Housing
      • Flywheel housing, SAE No. 0 or SAE No. 00
      • Flywheel, SAE No. 18 or SAE No. 21
      • SAE standard rotation
    • Fuel System
      • Fuel filter, LH spin-on type
      • Fuel transfer pump
      • Electronically controlled unit injectors
    • Lube System
      • Crankcase breather, top mounted
      • Oil cooler
      • Oil filler and dipstick, LH
      • Oil pump
      • Oil filter, LH, spin-on type
      • Front sump oil pan, 500-hour change interval
    • General
      • Paint: Caterpillar yellow, with optional colors available at request
      • Vibration damper
      • Lifting eyes

    Optional Equipment:

    Contact Us Today

    Get In Touch
    Call: (800) 451-7278