Cat® C0.5 Diesel Engine

The Cat^® C0.5 Industrial Diesel Engine is offered in ratings ranging from 4.1-6.4 kW (5.5-8.6 hp) @ 2000-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 8.2-10.2 kW (11.0-13.7 hp) @ 2800-3600 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Industries and applications powered by C0.5 engines include: Auxiliary Power Units, Compactors/Rollers, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.

Request a quote

Photos

Request a quote

Maximum Power	13.7HP
Maximum Torque	22lb-ft @ 2600 rpm
Minimum Power	11HP
Rated Speed	2000-3600 rpm

Emissions	U.S. EPA Tier 4 Final, EU Stage V

Aspiration	Naturally Aspirated (NA)
Bore	2.6in
Combustion System	Indirect Injection
Compression Ratio	23.5:1
Displacement	31in³
Engine Configuration	In-Line 2
Rotation from Flywheel End	Counterclockwise
Stroke	2.8in

Height	20.6in
Length	16in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments	126lb
Width	14.6in

Standard Equipment:

Air Inlet System
- Inlet manifold with choice of inlets.
Control System
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
Flywheel And Flywheel Housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
Lube System
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment:

Contact Us Today

Get In Touch

Call: (800) 451-7278