ATC-300+ CONTROLLER

Back to Home

The ATC-300+ is a comprehensive and multifunctional microprocessor-based ATS controller. It is a compact and self-contained panel-mounted device that is designed to replace traditional relay and solid-state logic panels. The ATC-300+ Controller provides programmed flexibility to address the needs of any system. It operates from all system voltages between 120 to 600V, single-phase and three-phase at 50 or 60 Hz. In addition, a period of no control power is provided. The controller monitors the condition of the three-phase line-to-line voltage and frequency of Source 1 and Source 2 power sources and can be programmed for single-phase operation. The ATC-300+ Controller provides the intelligence to ensure that the ATS operates properly through a series of programmed sensing and timing functions.

Pricing: Contact for Pricing Why we quote: Cat® machines are often configured to your job (attachments, hydraulics, cab options) and freight/taxes can vary by location. Request a quote to get accurate pricing based on your exact setup—typically within 1–2 business days.

Request a quote

Request a New Equipment Quote

Fill out this form below and we will get back to you within 1 to 2 business days! Alternatively, give us a call at 833-286-3561


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    No spam. We'll contact you within 1–2 business days.

    Request Machine Walkaround

    Find a Dealer Near You

    Rating Range 120 to 600V, single phase and three phase @ 50/60 Hz
    Switch Type Switch application dependent
    Transfer Type Switch application dependent
    Applicable Testing UL-recognized component
    Meets intent of UL 991 & UL 1008
    Meets IEC 1000-4-2, 1000-4-3, 1000-4-4
    Applicable Testing Continued 1000-4-5, 1000-4-6, 1000-4-11
    CISPR 11, Class A
    FCC Part 15, Class A
    CSS 22.2-178
    Enclosure Compatibility NEMA 1, NEMA 3R and NEMA 12
    UV-resistant ATC-300+ faceplate
    Frequency Measurement Accuracy +/- 0.1 Hz
    Frequency Measurement Range 40 Hz to 70 Hz
    Frequency Measurements Of Source 1 and Source 2
    Generator Start Relay 5A, 1/6 hp @ 250 Vac Vac 5A @ 30 Vdc with a 150W maximum load
    Input Control Voltage 65 to 145 Vac 50/60 hZ
    K1, K2 Relays
    10A, 1-3 hp @ 250 Vac

    10A@30 Vdc
    Operating Environment Resistant to ammonia, methane, nitrogen,hydrogen and hydrocarbons
    Operating Humidity 0 to 95% relative humidity (noncondensing)
    Operating Temperature Range -20 to 70 degree C (-4 to +158 degree F)
    Overfrequency Dropout Range 103 to 110% of the nominal system frequency
    Overfrequency Pickup Range 101% to (dropout - 1 Hz) of the nominal system frequency
    Storage Temperature Range -30 to 85 degree C (-22 to +185 degree F)
    Underfrequency Dropout Range 90 to 97% of the nominal system frequency
    Underfrequency Pickup Range (Dropout +1 Hz) to 99% of the nominal system frequency
    Undervoltage Dropout 50% to 90% of nominal voltage
    Undervoltage Pickup (Dropout +2%) to 99% of the nominal system voltage
    Voltage Measurement Accuracy +/-2% of nominal input voltage
    Voltage Measurement Range 0 to 790 VAC rms (50/60 Hz)
    Voltage Measurements of Utility Source 1 VAB Source 2 VAB
    Source 1 VAC Source 2 VBC
    Source 1 VCA Source 2 VCA

    What Our Customers Are Saying About Us

    Gregory Poole Equipment Company place picture
    4.0
    Based on 58 reviews
    powered by Google
    Tom Corona profile picture
    Tom Corona
    2 months ago
    Rich Stidd profile picture
    Rich Stidd
    2 months ago
    John Karpathian profile picture
    John Karpathian
    6 months ago
    Clean store and great employees
    Hunter Flaugher profile picture
    Hunter Flaugher
    11 months ago
    Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.
    Brian Hrudka profile picture
    Brian Hrudka
    1 year ago
    Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

    A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

    He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

    Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,
    Jacey Price profile picture
    Jacey Price
    2 years ago
    Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.
    David Lawrence profile picture
    David Lawrence
    2 years ago
    Brandon Pierce profile picture
    Brandon Pierce
    2 years ago
    Darin Noe profile picture
    Darin Noe
    2 years ago
    Jose Soto profile picture
    Jose Soto
    3 years ago
    Hunter Elliott profile picture
    Hunter Elliott
    3 years ago
    They had all my parts for my 3208 Cat.
    Friendly folks at parts counter.