CAREERS
(800) 451-7278

Contact us

Contacto
Request a Service Request New Equipment Request Used Equipment Request Rental Equipment
SEARCH

CALL US
CONTACT US
Request a Service Request New Equipment Request Used Equipment Request Rental Equipment
Menu

New CB34B Utility Compactor in North Carolina

  • Home
  • New Equipment
  • New Compactors
  • Tandem Vibratory Rollers
  • CB34B Utility Compactor
    • Back to Home

    The CB34B is a versatile machine that can be used as the only vibratory roller on small sized jobs or on larger jobs as a support roller for high-production rollers. The CB34B provides greater production capabilities with its 1300 mm (51 in) wide drums. Its high amplitude and drum width give it the capacity to achieve a tons-per-day production rate that make it an excellent match for shoulders, small parking lots, lane additions or other similar sized jobs.

    Pricing: Contact for Pricing

    Request a quote

    The CB34B is a versatile machine that can be used as the only vibratory roller on small sized jobs or on larger jobs as a support roller for high-production rollers. The CB34B provides greater production capabilities with its 1300 mm (51 in) wide drums. Its high amplitude and drum width give it the capacity to achieve a tons-per-day production rate that make it an excellent match for shoulders, small parking lots, lane additions or other similar sized jobs.

    Pricing: Contact for Pricing

    Request a quote
    Maximum Weight at Front Drum 3974lb
    Maximum Weight at Rear Drum 4180lb
    Operating Weight 8157lb
    Curb Clearance 20in
    Ground Clearance 11in
    Standard Compaction Width 51in
    Static Linear Load 80lb/in
    Travel Speed - Maximum 8mile/h
    Turning Radius - Inside Drum Edge 9.7ft
    Engine Model C2.2
    Gross Power 48.8HP
    Fuel Tank Capacity 24gal (US)
    Water Spray Tank Capacity 81gal (US)
    Drum Diameter 32in
    Drum Width 51in
    Maximum Machine Height 109in
    Overall Length 113in
    Overall Width 55in
    Wheel Base 81in
    Centrifugal Force per Drum - Maximum 7104lb
    Centrifugal Force per Drum - Minimum 5418lb
    Frequency 55/48 Hz (3,300/2800 vpm)
    Nominal Amplitude - High 0.02in

    Coming Soon

    Related Models

    Gregory Poole Equipment Company
    Gregory Poole Equipment Company
    3.9
    Based on 46 reviews
    powered by Google
    review us on
    Renee HerndonRenee Herndon
    21:55 29 Feb 24
    Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
    Michael BirrenMichael Birren
    14:58 24 Feb 24
    I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
    David LawrenceDavid Lawrence
    13:04 22 Feb 24
    Brandon PierceBrandon Pierce
    22:00 18 Feb 24
    Darin NoeDarin Noe
    01:17 16 Feb 24
    Jose SotoJose Soto
    15:26 23 Sep 23
    OLEKSANDR “Alex” KovalenkoOLEKSANDR “Alex” Kovalenko
    14:27 18 Sep 23
    👍
    Hunter ElliottHunter Elliott
    16:17 07 Sep 23
    Rick Kelly-CrapseRick Kelly-Crapse
    21:06 25 Aug 23
    They had all my parts for my 3208 Cat.Friendly folks at parts counter.
    js_loader

    Contact Us Today

    Get In Touch
    Call: (800) 451-7278