New 24 Motor Grader in North Carolina

Back to

Maximize your minesite’s productivity with the Cat® 24 motor grader. By building and maintaining haul roads, the 24 motor grader is designed to help you get more work done with lower owning and operating costs. Stay safe and comfortable with the updated cab.

Pricing: Contact for Pricing

Request a quote
Bore 5.4in
Displacement 1648in³
Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
Engine Model Cat C27
Net Power - EEC 80/1269 535hp
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Note (2) Optimized VHP Plus is standard for the 24.
Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
Number of Cylinders 12
Standard Capability 122°F
Stroke 6in
Operating Weight - Typically Equipped 165314lb
Blade Height 40in
Blade Width 24ft
Maximum Depth of Cut 21.7in
Maximum Lift Above Ground 16.1in
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
Weight* 161695lb

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • Engine: C27
    • 24-volt electric start
    • Air filters, dual with precleaner
    • Automatic dust ejector
    • Ether starting aid
    • Automatic fan, suction with hydraulic demand
    • Drive, near zero fan speed
    • Torque divider, lock-up
    • Transmission, 533 mm (21 in) planetary powershift with 6F/3R, ECPC
    • Enhanced auto-shift, APECS
    • Directional shift management
    • Differential, lock/unlock (auto/manual)
    • Parking brake, multi-disc, sealed and oil cooled
    • Fast fill (fuel, hydraulic, transmission, coolant)
    • Fuel priming pump, electric
    • Electronic prescreener water/fuel
    • Prescreener separator, water/fuel
    • Thermal shields
    • Fluid monitoring (engine, transmission, hydraulic, differential)
  • Electrical
    • Alarm, back-up
    • Alternator, 150 ampere, sealed, filtered air intake
    • Maintenance free batteries, 12V (4), 200 amp-hour
    • Heavy duty starter (two)
    • Electrical hydraulic valves, base 8
    • Electrical system, 24 volt
    • Lights, reversing, stop, tail, turn
    • Starter receptacle plug-in
  • Operator Environment
    • Air conditioner and heater sound suppressed, pressurized cab 73 dB(A) ISO 6394 at 70 percent fan speed
    • Adjustable armrest
    • Electro-hydraulic controls
    • Electronic throttle control
    • Automatic return to center articulation
    • 10 inch digital touch screen information display
    • Rear vision camera
    • Coat hook
    • Comfort suspension seat, cloth-covered
    • Front fixed laminated window glass with intermittent wiper, sides (two), rear with wiper/washer
    • Retractable seat belt, 76 mm (3 in)
    • Hydraulic implement lockout for roading and servicing
  • Technology Products
    • VIMS - 3G
    • Cat Grade with Cross Slope
    • Overspeed/underspeed protection
    • Second generation steering system
    • Ripper auto stow
    • Circle angle limits
  • Safety And Security
    • Fire suppression ready
    • Circle drive slip clutch
    • Locking doors
    • Ground level engine shutdown
    • Secondary steering
    • Working at heights tie-off anchors
    • Rear tandem access platforms
    • Seat belt indicator
  • Ground Engaging Tools
    • Moldboard, 7315 mm x 1067 mm x 50 mm (24 ft x 42 in x 2 in)
    • Rear ripper with seven shank capacity, three shanks/tips provided
  • Other Standard Equipment
    • Blade lift accumulators
    • Lincoln Centro-Matic Autolube System
    • Drawbar, eight shoe with replaceable wear strips
    • Fuel tank, 908 L (240 gal) fast fill
    • Ground level fueling
    • Push plate-counterweight
    • SOS ports, engine, hydraulic, transmission, coolant, fuel
    • Hydraulic and electric bulkheads
    • Fluid service center: engine, transmission, hydraulic oil, and coolant ports
    • High Performance Circle

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Heated seat
    • Heated and ventilated seat
    • Air horn
    • Radio Bluetooth
    • Radio Satellite Sirius
    • Outside mounted mirrors
    • Heated outside mounted mirrors 24V
    • Rear view camera additional dedicated monitor
    • Auto articulation
  • Power Train
    • Bar and plate duel core radiator
    • Precleaner Sy-klone
    • Control blade variable float
  • Guards
    • Guard Package including mud guard (two) bottom, eng. Compartment and front axle (two)
    • Tandem fenders with mounted guardrails
    • Sound suppression guard package
  • Electrical
    • Halogen operator access lighting package
    • LED operator access lighting package
    • Working halogen lighting package
    • Working LED lighting package
    • LED warning strobe light
  • Safety
    • Duel Access CAB platform
    • Front facing cameras (two)
    • Fire suppression system
    • Wheel chocks with mounting bracket
  • Other Attachments
    • VIMS and Satellite Product Link
    • VIMS and Duel (Cell/Satellite) Product Link
    • Rims Only option, 25" x 29" MP
  • Work Tools/g.e.t.
    • Flat 406 mm x 60 mm (16 in x 2.36 in) cutting edge
    • Serrated 406 mm x 75 mm (16 in x 2.95 in) cutting edge
    • Miningbit 355.6 mm x 75 mm (14 in x 2.13 in) cutting edge system
    • Tooth, ripper
    • 8.5m (24 ft) moldboard
  • Fluids
    • Cold Weather Package - Arctic hydraulic oil, engine, hydraulic, transmission and coolant heater (240V/30A)
Renee HerndonRenee Herndon
21:55 29 Feb 24
Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
Michael BirrenMichael Birren
14:58 24 Feb 24
I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.
David LawrenceDavid Lawrence
13:04 22 Feb 24
Brandon PierceBrandon Pierce
22:00 18 Feb 24
Darin NoeDarin Noe
01:17 16 Feb 24
Jose SotoJose Soto
15:26 23 Sep 23
Hunter ElliottHunter Elliott
16:17 07 Sep 23
Rick Kelly-CrapseRick Kelly-Crapse
21:06 25 Aug 23
They had all my parts for my 3208 Cat.Friendly folks at parts counter.
js_loader