| Bore | 4.5in |
|---|---|
| Derating Altitude | 10000ft |
| Displacement | 567.5in³ |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Engine Model | Cat® C9.3 |
| Maximum Torque - VHP Plus | 1000lb/ft |
| Net Power Range (Tier 4) | 224hp |
| Number of Cylinders | 6 |
| Stroke | 5.9in |
| Torque Rise | 39% |
| Operating Weight - Typically Equipped | 45547lb |
|---|
| Arc Radius | 16.3in |
|---|---|
| Blade Down Pressure - Base GVW | 17004lb |
| Blade Down Pressure - Maximum GVW | 29308lb |
| Blade Pull - Base GVW | 25931lb |
| Blade Pull - Maximum GVW | 34262lb |
| Blade Width | 14ft |
| Cutting Edge Thickness | 0.6in |
| Cutting Edge Width | 6in |
| End Bit - Thickness | 0.6in |
| End Bit - Width | 6in |
| Moldboard - Blade Width | 14ft |
| Moldboard - Height | 24in |
| Moldboard - Thickness | 0.87in |
| Throat Clearance | 6.5in |
| Ground Clearance - Rear Axle | 13.3in |
|---|---|
| Height - Top of Cab | 130in |
| Length - Counterweight to Ripper | 399in |
| Blade Tip Range - Backward | 5 |
|---|---|
| Blade Tip Range - Forward | 40 |
| Circle Centershift - Left | 27.4in |
| Circle Centershift - Right | 28.7in |
| Maximum Blade Position Angle | 90 |
| Maximum Depth of Cut | 29.5in |
| Maximum Lift Above Ground | 17.8in |
| Maximum Shoulder Reach Outside of Tires - Left | 82.3in |
| Maximum Shoulder Reach Outside of Tires - Right | 89.7in |
| Moldboard Sideshift - Left | 20.1in |
| Moldboard Sideshift - Right | 26in |
| Circle - Blade Beam Thickness | 1.6in |
|---|---|
| Circle - Diameter | 61.1in |
| Circle - Height | 6.3in |
| Drawbar - Height | 6in |
| Drawbar - Thickness | 0.5in |
| Drawbar - Width | 3in |
| Front Axle - Height to Center | 23.5in |
| Front Axle - Total Oscillation per Side | 32 |
| Front Axle - Wheel Lean - Left/Right | 18 |
| Front Frame Structure - Height | 12.6in |
| Front Frame Structure - Width | 12in |
| Front-Top/Bottom Plate - Thickness | 0.87in |
| Front-Top/Bottom Plate - Width | 12in |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con |
|---|
| Brakes - Parking | Multiple Oil Disc |
|---|---|
| Brakes - Secondary | Dual Circuit Control |
| Brakes - Service | Multiple Oil Disc |
| Brakes - Service - Surface Area | 3565in² |
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Transmission | APECS, Direct Drive, Powershift |
| Circle Drive Housing | 1.8gal (US) |
|---|---|
| Cooling System | 15gal (US) |
| Diesel Exhaust Fluid | 5.8gal (US) |
| Engine Oil | 7.9gal (US) |
| Front Wheel Spindle Bearing Housing | 0.13gal (US) |
| Fuel Capacity | 104gal (US) |
| Hydraulic System - Tank | 16.9gal (US) |
| Hydraulic System - Total | 26.4gal (US) |
| Tandem Housing - Each | 22.9gal (US) |
| Transmission - Differential - Final Drives | 18.5gal (US) |
| Machine Length Increase, Beam Raised | 40.6in |
|---|---|
| Penetration Force | 20812lb |
| Pry-Out Force | 28493lb |
| Ripper Shank Holder Spacing | 21in |
| Ripper Shank Holders | 5 |
| Ripping Depth - Maximum | 16.8in |
| Front, V-Type - Working Width | 47.4in |
|---|---|
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 4.6in |
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders | 5 or 11 |
| Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 18.4in |
| Front, V-Type, 5 or 11 Tooth - Working Width | 40.6in |
| Mid, V-Type - Scarifier Shank Holder Spacing | 4.6in |
| Mid, V-Type - Scarifier Shank Holders | 11 |
| Mid, V-Type - Scarifying Depth, Maximum | 11.5in |
| Mid, V-Type - Working Width | 46.6in |
| Rear - Scarifier Shank Holder Spacing | 10.5in |
| Rear - Scarifier Shank Holders | 9 |
| Rear - Scarifying Depth, Maximum | 16.8in |
| Rear - Working Width | 84in |
| Articulation Angle - Left/Right | 20° |
|---|---|
| Steering Range - Left/Right | 50° |
| Top Speed - Forward | 29.5mile/h |
| Top Speed - Reverse | 23.3mile/h |
| Turning Radius - Outside Front Tires | 25.59ft |
