| Bucket Payload | 33ton (US) |
|---|---|
| Engine Output - SAE J1995 | 1649hp |
| Note | Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions. |
| Operating Weight | 324ton (US) |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards |
|---|---|
| Gross Power - SAE J1995 | 1649hp |
| Net Power - ISO 9249 | 1625hp |
| Net Power - SAE J1349 | 1541hp |
| Emissions | Meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2 |
|---|---|
| Gross Power - SAE J1995 | 1531hp |
| Net Power - ISO 9249 | 1511hp |
| Net Power - SAE J1349 | 1425hp |
| Aspiration | Turbocharged and air-to-air aftercooled |
|---|---|
| Bore | 5.42in |
| Components (1) | Hydraulically driven radiator fan with electronically controlled fan speed |
| Components (2) | Micro processed engine management |
| Components (3) | Heavy-duty air filters |
| Components (4) | Two-stage fuel filter, including water separator |
| Components (5) | Additional high-capacity water separator |
| Displacement | 1648in³ |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards |
| Fuel Tank Capacity | 1342gal (US) |
| Number of Cylinders - Each Engine | 12 |
| Stroke | 6in |
| Batteries in Series/Parallel Installation | 4 x 210 Ah at 12V each; 420 Ah with 24V in total |
|---|---|
| Components (1) | Battery isolation relays |
| Components (2) | Emergency stop switches accessible from ground level and in engine module |
| Components (3) | 14 LED high-brightness working flood lights |
| Components (4) | 11 LED service lights |
| System Voltage | 24V |
| Batteries | 4 maintenance-free batteries |
|---|
| 6030 - Ground Pressure | 32.3psi |
|---|---|
| 6030 - Operating Weight | 660060lb |
| 6030 - Standard Track Pads | 3.25ft |
| 6030 FS - Ground Pressure | 32.2psi |
| 6030 FS - Operating Weight | 657640lb |
| 6030 FS - Standard Track Pads | 3.25ft |
| Note | Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants. |
| Hydraulic Tank Capacity - Approximately | 707gal (US) |
|---|---|
| Main Pumps | 4 x variable swash plate pumps |
| Main Pumps - Maximum Oil Flow - Diesel Version | 4 x 552 L/min (4 x 146 gal/min) |
| Maximum Pressure - Attachment | 4495psi |
| Maximum Pressure - Swing Pumps | 5076psi |
| Maximum Pressure - Travel | 5220psi |
| Swing Pumps | 2 x reversible swash plate double pumps |
| Swing Pumps - Maximum Oil Flow - Diesel Version | 4 x 197 L/min (4 x 52 gal/min) |
| Total Volume of Hydraulic Oil - Approximately | 925gal (US) |
| Diameter - Fan | 48in |
|---|---|
| Oil Flow of Cooling Pumps - Diesel Version | 2 x 467 L/min (2 x 123 gal/min) |
| Maximum Swing Speed - AC Version | 5r/min |
|---|---|
| Maximum Swing Speed - Diesel Version | 4.6r/min |
| Parking Brakes | Wet multiple-disc brake, spring-loaded/hydraulically released |
| Swing Drive | 2 compact planetary transmissions with axial piston motors |
| Swing Ring | Triple-race roller bearing with sealed internal gearing |
| Bottom Rollers - Each Side | 7 |
|---|---|
| Components (1) | All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened |
| Components (2) | Cast double-grouser combined pad-links with bushings connected by hardened full floating pins |
| Components (3) | Fully hydraulic self-adjusting track tensioning system with membrane accumulator |
| Components (4) | Automatic hydraulic retarder valve to prevent over-speed on downhill travel |
| Components (5) | Acoustic travel alarm |
| Gradeability - Travel Drives - Approximate | 47% |
| Maximum Tractive Force | 360144ft·lbf |
| Parking Brakes | Wet multiple disc brake, spring loaded/hydraulically released |
| Support Rollers - Each Side | 2 plus a skid plate in between |
| Track Pads - Each Side | 44 |
| Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors |
| Travel Speed - 1st Stage - Maximum | 0.87mile/h |
| Travel Speed - 2nd Stage - Maximum | 1.68mile/h |
| Components (1) | Under roof mounted heating ventilating and air conditioning system |
|---|---|
| Components (10) | Windshield with parallel intermittent wiper/washer |
| Components (11) | All-round safety glass, armored windshield and sliding side window |
| Components (12) | Operator Protective Guards (ISO 10262:1998 Level II |
| Components (13) | Joystick controls integrated in independently adjustable seat consoles |
| Components (14) | Fold-away auxiliary seat with safety belt |
| Components (2) | External sun shields at side and rear windows |
| Components (3) | Robust instrument panel including large colored BCS screen with transflective technology |
| Components (4) | Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system |
| Components (5) | Hydraulically operated 45 degree access stairway |
| Components (6) | Emergency egress ladder with ladder cage |
| Components (7) | Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat |
| Components (8) | Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests |
| Components (9) | Roller blinds at all windows |
| Internal Dimensions of Cab - Height | 7.05ft |
| Internal Dimensions of Cab - Length | 7.22ft |
| Internal Dimensions of Cab - Width | 5.25ft |
| Operator's Eye Level - Approximately | 21.33ft |
| Capacity - Grease Container | 119gal (US) |
|---|---|
| Type (1) | Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times |
| Type (2) | Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders |
| Type (3) | Lubricated pinion for greasing of internal gearing of swing ring |
| Type (4) | System failures displayed by Board Control System |
| Type (5) | Grease filters between service station and container as well as directly behind grease pump |
| Bucket Capacity - Backhoe (heaped 1:1) | 22.2yd³ |
|---|---|
| Bucket Capacity - Face Shovel (heaped 2:1) | 21.6yd³ |
| Maximum Crowd Force | 291700ft·lbf |
|---|---|
| Maximum Tearout Force | 212150ft·lbf |
| All buckets (FS and BH) are equipped with a wear package consisting of: (1) | Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth |
|---|---|
| All buckets (FS and BH) are equipped with a wear package consisting of: (2) | Wing shrouds on side walls and heel shrouds at bottom edges |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | Horizontal automatic constant-angle bucket guidance and vertical automatic constant-angle bucket guidance |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | Constant boom momentum throughout the whole lift arc and crowd force assistance |
| Type (1) | Catwalks with rails at booms |
| Type (2) | Special wear packages for highly abrasive materials on request |
| Type (3) | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
| Type (4) | Welding procedures allow for internal counter-welding (double prep weld) wherever possible |
| Type (5) | Booms and sticks are stress-relieved after welding |
| Type (6) | Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas |
