Service within 2 days — or when you say.

LEARN MORE

Cat?� C15 Industrial Power Unit

Back to Home

The Cat?� C15 Industrial Power Unit is offered in ratings ranging from 328-403 bkW (440-540 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent and EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat?� Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Pricing: Contact for Pricing Why we quote: Cat® machines are often configured to your job (attachments, hydraulics, cab options) and freight/taxes can vary by location. Request a quote to get accurate pricing based on your exact setup—typically within 1–2 business days.

Request a quote

Request a New Equipment Quote

Fill out this form below and we will get back to you within 1 to 2 business days! Alternatively, give us a call at 833-286-3561


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    No spam. We'll contact you within 1–2 business days.

    Request Machine Walkaround

    Find a Dealer Near You

    Maximum Power 540hp
    Minimum Power 440hp
    Rated Speed 1800-2100 rpm
    Emissions China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
    Aftertreatment -
    Aspiration Turbocharged Aftercooled (TA)
    Bore 5.4in
    Compression Ratio 18.0:1
    Displacement 927.6in³
    Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
    Rotation from Flywheel End Counterclockwise
    Stroke 6.8in
    Height 103.5in
    Length 96.4in
    Weight 4532lb
    Width 51.8in

    Standard Equipment:

    • Turbocharged
    • Air-to-Air Aftercooled
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
    • Exhaust manifold, dry
    • Optional exhaust outlet
    • SAE No. 1 flywheel housing
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request

    Optional Equipment:

    What Our Customers Are Saying About Us

    Gregory Poole Equipment Company place picture
    4.0
    Based on 58 reviews
    powered by Google
    Tom Corona profile picture
    Tom Corona
    21:51 06 May 26
    Rich Stidd profile picture
    Rich Stidd
    22:10 02 May 26
    John Karpathian profile picture
    John Karpathian
    16:21 24 Jan 26
    Clean store and great employees
    Hunter Flaugher profile picture
    Hunter Flaugher
    12:56 06 Aug 25
    Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.
    Brian Hrudka profile picture
    Brian Hrudka
    16:45 12 Feb 25
    Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

    A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

    He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

    Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,
    Jacey Price profile picture
    Jacey Price
    21:04 05 Dec 24
    Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.
    David Lawrence profile picture
    David Lawrence
    13:04 22 Feb 24
    Brandon Pierce profile picture
    Brandon Pierce
    22:00 18 Feb 24
    Darin Noe profile picture
    Darin Noe
    01:17 16 Feb 24
    Jose Soto profile picture
    Jose Soto
    15:26 23 Sep 23
    Hunter Elliott profile picture
    Hunter Elliott
    16:17 07 Sep 23
    Rick Kelly-Crapse profile picture
    Rick Kelly-Crapse
    21:06 25 Aug 23
    They had all my parts for my 3208 Cat.
    Friendly folks at parts counter.